Logan 350-1 Handleiding
Logan
Snijmachine
350-1
Lees hieronder de đź“– handleiding in het Nederlandse voor Logan 350-1 (8 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8

For best results use only
authentic Logan blades
INSTRUCTION MANUAL MODEL 350-1
COMPACT ELITE
MAT CUTTER
INSTRUCTIONS AND OPERATION MANUAL
32in (81cm) mat cutting system with bevel & straight cutters,
production stops and 20 in (51 cm) squaring bar.
Uses Logan Replacement
Blade #270
L1992DN2 rev 3 1-16
Purchase Date
ID Number (on bottom of board)
Date (on bottom of board)
LoganGraphic.com
CAUTION!!
MAT CUTTING BLADES ARE SHARP

Compact Elite Mat Cutter
Instruction Manual Model 350-1
2
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 LoganGraphic.com
Congratulations on your purchase of the Logan Compact Elite Mat Cutter.
This versatile and dependable tool will prove to be a useful device for those seeking professional results from a low priced, easy to use mat cutter.
This instruction manual is written to aquaint you thoroughly with this product. Please take some time to familiarize yourself with it before cutting. You
will find that the time taken will be well worth it and you will be cutting quality mats in no time.
CHECK OF CONTENTS:
350-1 Compact Classic - 32” base board with Mat Guide, Straight Cut Measuring Bar, Measuring Bar Stop, Guiderail Stop, Bevel Cutting Head,
Straight Cutting Head, Slip Sheet, Instructional DVD and 1 five pack of Logan #270 blades.
Warranty
Logan Graphic Products, Inc. (“Logan”) warrants the 350-1 COMPACT ELITE to be free from defects in parts and workmanship for a period of two years
from the date of original purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary replacement parts found to be
defective. Should the product need to be returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing.
Costs of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses,
incidental or consequential, direct or indirect, arising from the use of this product. This warranty extends only to the original purchaser and is not assignable
or transferable. This warranty is in lieu of all other warranties, expressed or implied. Be advised that any Logan products purchased as “new” from an
unauthorized dealer, such as an online auction site or similar, may be void of their warranty.
Logan Graphic Products, Inc.
1100 Brown Street Wauconda, IL 60084
800/331-6232 847/526-5515
Mat Guide
Used to set the border
width of a mat and
keep the mat in position
IDENTIFICATION OF MACHINE COMPONENTS:
Cutting Board
Vinyl covered base
board of machine
Guide Rail
Used to guide cutting
heads while in use
Slip Sheet
A Slip Sheet is a piece of
scrap mat board that is
placed beneath the mat
when bevel cutting
Start and Stop
Indicator
Line which shows
where to begin
and end cut
Blade Knob
Holds blade in
place for cutting.
Blade Holder
Blade holding device which slides,
allowing blade to cut into mat
Nylon Guides
Guides which allow Bevel
Cutting Head to hook
onto Guide Rail
Cutting Board
Bevel Cutting Head
Straight
Cutting Head
Blade Screw
Holds blade in
place inside
Blade Holder
Blade Cover
Covers blade
on Blade Holder
Measuring Bar
20in (51cm) removeable
scale & stop used to cut
matboard to size
Rail Stop
Used when cutting many
mats the same size
Blade Holder
Block which holds blade in place
while cutting. Has three separate
depth settings.
Squaring Bar
Used to hold the matboard
90Âş square to the guiderail

Compact Elite Mat Cutter
Instruction Manual Model 350-1
3
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 LoganGraphic.com
Left Right
Top
Bottom
Fig. 1
Blade Installation - Model 302 Bevel Cutter
1. Remove blade knob.
2. Remove one blade from the package of five.
NOTE: Because the blades are packed with a small amount of oil, they may stick
together. Be certain that only one blade is being inserted into the blade slot.
3. Place blade onto blade holder, sharp edge down and slide blade until
corner of blade tip enters slot and hole in blade lines up with hole in
blade holder (Fig. 2) (Fig. 3).
4. Replace blade knob and tighten.
NOTE: Blade holder has a spring that is designed to keep blade safely withdrawn
when not in use. It is not designed to pull blade out of mat after cutting.
Blade Installation - Model 701-1 Straight Cutter Elite
1. Remove blade knob and blade cover.
2. Align blade hole over thread. Be sure sharp edge of blade is facing down.
3. Reassemble blade cover and blade knob.
NOTE: Adjust blade to foamboard (fully extended), standard mat board (middle
setting) or safety (fully retracted) (Fig. 4).
Measuring Bar & Stop Installation
1. Align pin in bottom of measuring bar with hole on bar and press to install
(Fig. 5).
2. Slide stop onto guide rail (Fig. 5).
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Orientation
The procedures detailed in the
following instructions refer to the
right & left sides and top & bottom
of the machine as shown (Fig. 1).
Product specificaties
Merk: | Logan |
Categorie: | Snijmachine |
Model: | 350-1 |
Kleur van het product: | Meerkleurig |
Draaghandvat: | Ja |
Materiaal: | Metaal |
Snijcapaciteit: | - mm |
Snijlengte: | 813 mm |
Snijbreedte (max): | 813 mm |
Inclusief mes: | Ja |
Veerdrukgeleidingsrail: | Ja |
Parallelle matgeleider: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Logan 350-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Logan

26 Maart 2025

26 Maart 2025
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Bomann
- Snijmachine Borner
- Snijmachine Boss
- Snijmachine Brandson
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Kogan
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Perel
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Swan
- Snijmachine Team
- Snijmachine Thane
- Snijmachine Toolland
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Ozito
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Camry
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Khind
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine GOTIE
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Maruyama
- Snijmachine Royal Catering
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine Ovela
- Snijmachine CaterChef
- Snijmachine Cecotec
- Snijmachine Weston
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Cigweld
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Wolfcraft
- Snijmachine Panduit
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
- Snijmachine Prowork
- Snijmachine Backyard Pro
Nieuwste handleidingen voor Snijmachine

30 Januari 2025

20 December 2024

17 December 2024

17 December 2024

17 December 2024

8 December 2024

7 December 2024

30 November 2024

30 November 2024

20 November 2024