Make Noise Richter Wogglebug Handleiding

Make Noise Niet gecategoriseerd Richter Wogglebug

Lees hieronder de 📖 handleiding in het Nederlandse voor Make Noise Richter Wogglebug (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
RICHTER
WOGGLEBUG
Limited WARRANTY:
Make Noise warrants this product to be free of defects in materials or construction for a period of one year
from the date of purchase (proof of purchase/invoice required).
Malfunction resulting from wrong power supply voltages, backwards power cable connection, abuse of the
product or any other causes determined by Make Noise to be the fault of the user are not covered by this
warranty, and normal service rates will apply.
During the warranty period, any defective products will be repaired or replaced, at the option of Make Noise,
on a return-to-Make Noise basis, with the customer paying the transit cost to Make Noise. Please contact
Make Noise for Return To Manufacturer Authorization.
Make Noise implies and accepts no responsibility for harm to person or apparatus caused through operation
of this product.
Please contact technical@makenoisemusic.com with any questions, needs & comments, otherwise... go
MAKE NOISE.
http://www.makenoisemusic.com
Special Thanks to Grant Richter for his genius and contributions to the world of synthesizers and for granting
Make Noise permission to design a version of the Wogglebug!
Thanks to Beta Analysts: Walker Farrell, Lee Coleman, Devin Booze, Richard Devine, Robert AA Lowe, Pete
Speer
Installation:
The Make Noise Richter Wogglebug is an electronic signal generator requiring 50mA of +/-12V regulated
power and properly formatted distribution receptacle to operate. It is designed to be used within the euro
format modular synthesizer system.
Go to http://www.doepfer.de/a100_man/a100t_e.htm for the details of this format.
To install, find 10HP of space in your euro-rack synthesizer system, confirm proper installation of included
power cable on backside of module (see picture below), plug the 16pin end power cable into the euro-rack
style power distribution board, minding the polarity so that the RED stripe on the cable is oriented to the
NEGATIVE 12 volt supply line. This is USUALLY at the bottom. On the Make Noise power bus board, the
negative 12 volt supply is indicated by the white stripe.
Please refer to your case manufacturers’ specifications for location of the negative supply.


Product specificaties

Merk: Make Noise
Categorie: Niet gecategoriseerd
Model: Richter Wogglebug

Heb je hulp nodig?

Als je hulp nodig hebt met Make Noise Richter Wogglebug stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Make Noise

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd