Mackie 802VLZ4 Handleiding

Mackie Mengpaneel 802VLZ4

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie 802VLZ4 (28 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 107 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
802VLZ4
O W N E R ’ S M A N U A L
8-Channel Ultra-Compact Mixer
802VLZ4
2
802VLZ4
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-sup-
ply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15.
This apparatus shall not be exposed to dripping or splashing, and no
object filled with liquids, such as vases or beer glasses, shall be placed
on the apparatus.
16.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
17.
The MAINS plug or an appliance coupler is used as the disconnect device,
so the disconnect device shall remain readily operable.
PORTABLE CART
WARNING
CAUTION AVIS
RISK OF ELECTRIC . DO NOT OPENSHOCK
RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC
CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO
ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.
AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.
CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.
AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR
A A LA PLUIE OU L'HUMIDITE
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral
est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de
"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque
d'éléctrocution.
The exclamation point within an equilateral triangle is intended to alert the
user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé
pour alerter les utilisateurs de la présence d'instructions importantes pour le
fonctionnement et l'entretien (service) dans le livret d'instruction
accompagnant l'appareil.
18. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandthe
receiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfrom
that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
CAUTION: Changes or modifications to this device not expressly
approved by LOUD Technologies Inc. could void the user's authority to
operate the equipment under FCC rules.
19.
This apparatus does not exceed the Class A/Class B (whichever is
applicable)
limits for radio noise emissions from digital apparatus as
set out in the radio interference regulations of the Canadian Department
of Communications.
ATTENTIONLe présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils
numériques de class A/de class B (selon le cas) prescrites dans le
réglement sur le brouillage radioélectrique édicté par les ministere des
communications du Canada.
20.
Exposure to extremely high noise levels may cause permanent hearing
loss. Individuals vary considerably in susceptibility to noise-induced
hearing loss, but nearly everyone will lose some hearing if exposed to
sufficiently intense noise for a period of time. The U.S. Government’s
Occupational Safety and Health Administration (OSHA) has specified
the permissible noise level exposures shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits
could result in some hearing loss. To ensure against potentially danger-
ous exposure to high sound pressure levels, it is recommended that all
persons exposed to equipment capable of producing high sound pres-
sure levels use hearing protectors while the equipment is in operation.
Ear plugs or protectors in the ear canals or over the ears must be worn
when operating the equipment in order to prevent permanent hearing
loss if exposure is in excess of the limits set forth here:
Duration,
per day in
hours
Sound Level
dBA, Slow
Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Veryloudclassicalmusic
1.5 102
1 105 Matt screaming at Troy about
deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
WARNING — To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
Owner’s Manual
3
Owner’s Manual
Part No. SW0969 Rev. A 06/13
©2013 LOUD Technologies Inc.
All Rights Reserved.
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Purchased at:
Date of purchase:
Contents
IMPORTANT SAFETY INSTRUCTIONS 2 ........................
CONTENTS 3 ..............................................................
FEATURES 4 ...............................................................
INTRODUCTION 4 ......................................................
HOW TO USE THIS MANUAL 4 ....................................
GETTING STARTED 5 ...................................................
THINGS TO REMEMBER 5 ...........................................
HOOKUP DIAGRAMS............................................... 6
PATCHBAY DESCRIPTION 11 .......................................
1. MIC INS (CHANNELS 1–3) 11 ......................
2. LINE INS (CHANNELS 1–2) 12 ......................
3. STEREO LINE INS 12 ....................................
4. CHANNEL INSERT (CHANNELS 1–2) 12 .........
5. LOW CUT (CHANNELS 1–3) 13 .....................
6. INSTRUMENT SWITCH (CHANNELS 1–2) 13 ..
7. GAIN (CHANNELS 1–3) 13 ..........................
8. STEREO RETURN 13 ....................................
9. ALT 3–4 OUTS 13 ........................................
10. CONTROL ROOM OUTS 14 ...........................
11. PHONES ................................................ 14
12. PHANTOM SWITCH AND LED 14 ..................
13. TAPE IN 14 .................................................
14. TAPE OUT 15 ..............................................
15. AUX SEND 15 .............................................
16. 1/4" MAIN OUTS 15 ...................................
17. XLR MAIN OUTS 15 ...................................
18. XLR MAIN OUT LEVEL SWITCH 15 ................
19. POWER CONNECTION 15 .............................
20. POWER SWITCH 15 .....................................
CHANNEL STRIP DESCRIPTION 16 ...............................
21. LEVEL .................................................... 16
22. PRE FADER SOLO 16 ...................................
23. MUTE/ALT 3–4 16 ......................................
24. PAN 17 .......................................................
25. LOW EQ 17 .................................................
26. MID EQ 17 ..................................................
27. HI EQ 17 .....................................................
28. AUX ...................................................... 18
OUTPUT SECTION 19 ..................................................
29. MAIN MIX 19 .............................................
30. CONTROL ROOM SOURCE MATRIX 19 ..........
31. PHONES ............................................... 19
32. CONTROL ROOM/SUBMIX 19 .....................
33. ASSIGN TO MAIN MIX 20 ............................
34. RUDE SOLO 20 ............................................
35. METERS ................................................. 20
36. PRE OR POST (AUX) 21 ..............................
37. AUX MASTER SEND 21 ................................
38. STEREO RETURN 21 ....................................
39. POWER LED 21 ...........................................
APPENDIX A: SERVICE INFORMATION 22 ....................
APPENDIX B: CONNECTIONS.................................. 22
APPENDIX C: TECHNICAL INFORMATION 25 ................
802VLZ4 LIMITED WARRANTY 27 ..............................
Like us
Follow us
Watch our dang videos


Product specificaties

Merk: Mackie
Categorie: Mengpaneel
Model: 802VLZ4
Gewicht: 2000 g
Breedte: 227 mm
Diepte: 273 mm
Hoogte: 47 mm
Frequentiebereik: 20 - 20000 Hz
Crosstalk (1kHz): 100 dB
Aantal kanalen: 8 kanalen
Totale harmonische vervorming (THD): 0.001 procent
Microphone input impedance: 2550 Ohm
Stroomverbruik (typisch): 13 W
Synchronisatie ingangsimpedantie: 17000 Ohm
Digitaal geluid verwerken: - Bit

Heb je hulp nodig?

Als je hulp nodig hebt met Mackie 802VLZ4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Mackie

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel

DNA

DNA CM4-DSP Handleiding

24 December 2024
DNA

DNA Mix 4U Handleiding

24 December 2024
Ashly

Ashly AQM 1208 Handleiding

15 December 2024
Yamaha

Yamaha MB02R96 Handleiding

14 December 2024
Yamaha

Yamaha Rio1608-D Handleiding

13 December 2024
Yamaha

Yamaha Ri8-D Handleiding

13 December 2024
Yamaha

Yamaha RSio64-D Handleiding

13 December 2024
Phonic

Phonic AM8GE Handleiding

11 December 2024