Mackie 1202VLZ4 Handleiding

Mackie Mengpaneel 1202VLZ4

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie 1202VLZ4 (28 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

1202VLZ4

O W N E R ’ S M A N U A L

12-Channel Compact Mixer

POWER ON PHANTOM ON

CAUTION: TO REDUCE THE RISK OF FIRE

REPLACE WITH CORRECT TYPE FUSE. REMOVE

POWER CORD BEFORE CHANGING VOLTAGE.

100 120 240VAC VAC VAC

MIC

+ 4 4 34 / R 3 / L

CHANNEL INSERT

BAL / UNBAL

R L

CONTROL

ROOM

BAL / UNBAL

ALT

OUT

2 1

PRE-FADER / PRE EQ TIP SEND / RING RETURN

100-120V: 500mA/250 V SLO-BLO

220-240V: 250mA/250 V SLO-BLO

REPLAC E WIT H THE SAME T YPE FUSE AND RAT ING.

DISCONNE CT SUPPLY COR D BEFORE CHAN GING F USE UT ILISE UN FUSIBLE DE RECHANGE DE MÊME T YPE.

DEBRANCHER AVANT DE REMPLAC ER LE FUSIBLE

MAIN

OUT LEVEL

MAIN

RIGHT

B DALANCE

MAIN

LEFT

B DALANCE

REVISION

SERIAL NUMBER

WARNING:

T O REDUCE T HE RISK OF FIRE OR ELECT RIC

SHOCK, DO NOT EXPOSE T HIS EQUIPMENT TO RAIN OR

MOIST URE. DO NOT REMOVE C OVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING T O QUALIFIED PERSONNEL.

AVIS:

RISQUE DE CHOC ELE CTRIQUE — NE PAS OUVRIR

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND THE ICES-003 FOR CANADA.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL

INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE

THAT MAY CAUSE UNDESIRED OPERATION.

1202VLZ4

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases or beer glasses, shall be placed

on the apparatus.

16.

Do not overload wall outlets and extension cords as this can result in a

risk of ﬁre or electric shock.

17.

This apparatus has been designed with Class-I construction and must

be connected to a mains socket outlet with a protective earthing

connection (the third grounding prong).

18.

This apparatus has been equipped with a rocker-style AC mains power

switch. This switch is located on the rear panel and should remain

readily accessible to the user.

19.

The MAINS plug or an appliance coupler is used as the disconnect

device, so the disconnect device shall remain readily operable.

PORTABLE CART

WARNING

CAUTION AVIS

RISK OF ELECTRIC . DO NOT OPENSHOCK

RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO

ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.

CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR

A A LA PLUIE OU L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral

est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de

"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque

d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé

pour alerter les utilisateurs de la présence d'instructions importantes pour le

fonctionnement et l'entretien (service) dans le livret d'instruction

accompagnant l'appareil.

20. NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthe

receiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianfor

help.

CAUTION: Changes or modiﬁcations to this device not expressly

approved by LOUD Technologies Inc. could void the user's authority to

operate the equipment under FCC rules.

21.

This apparatus does not exceed the Class A/Class B (whichever is

applicable)

limits for radio noise emissions from digital apparatus as

set out in the radio interference regulations of the Canadian Department

of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils

numériques de class A/de class B (selon le cas) prescrites dans le

réglement sur le brouillage radioélectrique édicté par les ministere des

communications du Canada.

22.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially

dangerous exposure to high sound pressure levels, it is recommended

that all persons exposed to equipment capable of producing high

sound pressure levels use hearing protectors while the equipment

is in operation. Ear plugs or protectors in the ear canals or over the

ears must be worn when operating the equipment in order to prevent

permanent hearing loss if exposure is in excess of the limits set forth

here:

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Veryloudclassicalmusic

1.5 102

1 105 Matt screaming at Troy about

deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product

should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and

human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city ofﬁce, waste authority, or your household waste disposal service.

Owner’s Manual

Part No. SW0970 Rev. A 06/13

Contents

CHANNEL STRIP DESCRIPTION 13 ...............................

“U” LIKE UNITY GAIN ............................. 13

23. LEVEL .................................................... 13

24. PRE-FADER SOLO 13 ...................................

25. MUTE/ALT 3–4 13 ......................................

26. PAN....................................................... 14

CONSTANT LOUDNESS ! ! ! 14 ......................

3-BAND EQ 14 ............................................

27. LOW EQ 14 .................................................

28. MID EQ 14 ..................................................

29. HI EQ 15 .....................................................

MODERATION DURING EQ 15 ......................

30. AUX 2 SEND 15 ..........................................

31. AUX 1 SEND 15 ..........................................

OUTPUT SECTION 16 ..................................................

32. MAIN MIX 16 .............................................

33. CONTROL ROOM SOURCE MATRIX 16 ..........

34. CONTROL ROOM/SUBMIX 16 .....................

A WORD ABOUT PRE-FADER SOLO (PFL) 17

35. RUDE SOLO LIGHT 17 ..................................

36. ASSIGN TO MAIN MIX 17 ............................

37. METERS – MANY DISPLAYS IN ONE! 17 .......

38. PRE OR POST (AUX 1) 18 ...........................

39. AUX 1 MASTER 18 ......................................

40. STEREO RETURNS 18 ...................................

41. RETURN TO AUX 1 19 .................................

JACK NORMALLING 19 ................................

APPENDIX A: SERVICE INFORMATION 20 ....................

APPENDIX B: CONNECTIONS.................................. 20

APPENDIX C: TECHNICAL INFORMATION 24 ................

SPECIFICATIONS ............................................. 24

BLOCK DIAGRAM 25 ............................................

TRACK SHEET.................................................. 26

1202VLZ4 LIMITED WARRANTY 27 ............................

IMPORTANT SAFETY INSTRUCTIONS 2 ........................

CONTENTS 3 ..............................................................

FEATURES 4 ...............................................................

INTRODUCTION 4 ......................................................

HOW TO USE THIS MANUAL 4 ....................................

GETTING STARTED 5 ...................................................

HOOKUP DIAGRAMS............................................... 6

PATCHBAY DESCRIPTION 8 .........................................

1. MIC INS (CHANNELS 1–4) 8 ........................

2. LINE INS (CHANNELS 1–4) 8 ........................

3. LOW CUT (CHANNELS 1–4) 9 .......................

4. GAIN (CHANNELS 1–4) 9 ............................

5. STEREO LINE INS 9 ......................................

6. IMAGINARY CONTROL 9 ............................

EFFECTS: SERIAL OR PARALLEL? 9 ................

7. STEREO RETURNS 10 ...................................

8. AUX SEND 1&2 10 ......................................

9. TAPE IN 10 .................................................

10. TAPE OUT 10 ..............................................

11. 1/4" MAIN OUTS 10 ...................................

12. PHONES ................................................ 11

13. XLR MAIN OUTS 11 ...................................

14. XLR MAIN OUT LEVEL SWITCH 11 ................

15. CONTROL ROOM OUTS 11 ...........................

16. ALT 3–4 OUTS 11 ........................................

17. CHANNEL INSERT (CHANNELS 1–4 ) 11 ........

18. POWER CONNECTION 12 .............................

19. FUSE ...................................................... 12

20. VOLTAGE SELECTOR 12 ................................

21. POWER SWITCH 12 .....................................

22. PHANTOM SWITCH 12 ................................

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

Like us

Watch our dang videos

Product specificaties

Merk:	Mackie
Categorie:	Mengpaneel
Model:	1202VLZ4
Gewicht:	3000 g
Breedte:	303 mm
Diepte:	272 mm
Hoogte:	75 mm
Frequentiebereik:	20 - 20000 Hz
Aantal kanalen:	12 kanalen
Microphone input impedance:	2500 Ohm
Stroomverbruik (typisch):	25 W
Synchronisatie ingangsimpedantie:	10000 Ohm
Digitaal geluid verwerken:	- Bit
Line Signal-to-Noise Ratio (SNR):	90 dB