La Crosse Technology LTV-WL1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology LTV-WL1 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model: LTV-WL1
DC: 102522
SPOT WATER LEAK SENSOR
AA
+
-
AA
+
-
LED
Light
Transmission button (TX)
Bar code
ID number
REMOTE MONITORING WITH WIFI
Benefits of connecting your sensor to the La Crosse View™ app:
• When the sensor is connected to the La Crosse View app, you’ll have access to its status anywhere
on the go.
• You can even setup alerts which will send you push notifications for when water is detected, when
water is no longer detected, the connection is lost, or when the sensor’s batteries are low.
• This information can also easily be shared with friends and family.
POSITIONING
• The sensor will work best when simply placed on a floor. It will begin to detect water at 0.031 inches
(0.787mm).
• If sensor is placed vertically (Ex: hung inside a sump pump) the depth of the water needs to be at
least 0.25 inches (6.35mm) high to trigger the sensor.
IMPORTANT: The metal contacts on the sensor should not be in contact with other metal. This will cause
false WET readings and may damage the sensor.
Water Sensor
Hanging Hole
Page | 2
POWER & LED LIGHT COLORS
Power:
1. Remove the front cover by twisting counter-clockwise to the unlock position.
2. Insert 2 fresh AA batteries according to the polarity markings. The LED light will flash blue when
batteries are inserted.
3. Replace front cover and turn clockwise to locked position.
LED Colors:
BLUE LED: Normal Transmission. The LED light will occasionally flash blue, indicating it is still
transmitting correctly and that no water has been detected. Press the TX button inside the front cover to
force a transmission at any time.
RED LED: Water detected. The LED light will flash red twice every 5 seconds until dry. When water is no
longer detected, the light will reduce in frequency and revert back to flashing blue to indicate
transmission.
PURPLE LED: Battery is low. When the batteries need to be replaced, the LED light will flash purple 5 times
every 30 seconds. (Purple) will flash once every second for 5 seconds.
SENSOR ID
La Crosse View™ Compatible:
There is a Device ID and bar code located under the front cover. This ID is recognized by the La Crosse
View app for users with an existing La Crosse View compatible system*.
To add this sensor to your existing La Crosse View™ compatible system:
1. Open your La Crosse View app to add sensors.
2. From Main Menu - select “Devices” under “Add/Edit”
3. On Devices page - select “ADD DEVICE”
4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select “Search”.
5. On Confirm Device page - Confirm the sensor image and model number are correct and select “YES”.
6. On Enter Device and Location Names page - Enter Device Name and select a location or enter
a Location Name for your sensor. Select “DONE”.
7. You will now be prompted to add a water alert. Select “Add Alert” to add the alert right away or select
“Later” to add at a later
*Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor’s data to the La Crosse View app. For more information about our new connected stations visit:
http://bit.ly/LaCrosseViewconnected
Page | 3
C A R E + M A I N T E N A N C E
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use,
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
SPECIFICATIONS
Temperature Range: -40°C to 60°C (-40°F to 140°F)
Transmission Range: Up to 400 feet (121 meters) in open air, RF 915 MHz
Update Intervals: Samples every minute. Updates immediately if change.
Updates every 3 minutes if no change.
LED Lights: Blue-Normal transmission-No water detected
Red- Water detected-flashes twice every 5 seconds
Purple-Low battery-flashes 5 times every 30 seconds
Batteries: 2-AA, IEC, LR6 batteries (not included)
Battery Life: over 24 months with reputable batteries


Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: LTV-WL1

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology LTV-WL1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd La Crosse Technology

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd