La Crosse Technology TX145W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology TX145W (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
GLIDE SENSOR
Wind
Speed
Easy-to-Install
Mounting Bracket TX145W
Solar Panel
Assisted Power
02
Follow the instructions below to attach the Wind Cups with a mini
screwdriver.
Install the Wind Cups if needed
Remove the Glide Sensor, and Wind Cups,
from the package. Take note of the flat
edges located on the head of the sensor
and underside of the Wind Cups.
Carefully tighten the screw on the side
of the cups using a mini screwdriver. The
screw should tighten into the flat edge of
the post.
Align the flat edges and place the Wind
Cups on top of the sensor.
1.
3.
2.
4. When the screw is tight, gently pull up on
the cups to ensure they are secure.
If they pull o, start again with step two.
Initial Setup
3
Insert 3-AA batteries into the Glide Sensor
according to polarity.
1. Press on and slide down the outer cover.
2. Lift up and remove the battery cover.
3. Insert batteries.
4. Replace the battery cover and outer cover.
Power Up
Glide
Wind Sensor
TX145W
Press and
slide down
Sensor Placement & Mounting
• Ideally, the sensor should be mounted on the tallest object
in your area. Avoid positioning it parallel or below eaves,
rooflines, trees, or other objects that may obstruct wind
readings.
• Make sure all the screws on the Mounting Bracket, Wind Cups,
and Battery compartment are securely fastened.
• The sensor should be mounted with the Wind Cups on top.
• To optimize battery life, ensure the Solar Panel is facing
the sun. The Solar Panel alone will not operate the sensor,
batteries are required.
• For more information visit: bit.ly/wind_sensor_mounting
• The maximum wireless transmission range to the station is up
to 330ft (100m) in open air. This does not include walls, floors,
or other large obstructions.
See page for wind cup installation information.02
For Accurate Glide Sensor Measurements


Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: TX145W

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology TX145W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd La Crosse Technology

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd