BlueBuilt BBMA2M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor BlueBuilt BBMA2M (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
M
M
B
M
FLYING START.
Whoooo.
93
SET UP MONITOR ARM.
EN
Feed-through mount (B)
Drill a hole in your desk and feed the clamp through it.
Clamp mount (A)
Mount your monitor arm to your desk with the clamp.
2
STEP 4A.
Clamping attachment.
STEP 2A.
Clamping attachment.
STEP 2B.
Feed-through fixation.
STEP 3A.
Clamping attachment.
STEP 3B.
Feed-through fixation.
Place the clamp on the desk and tighten
the screw upwards until the stand is
fastened tightly.
Suitable for desks with a thickness
between 10 and 40mm.
Place the clamp attachment
4
on the
other side of the stand and tighten the
screw.
Suitable for desks with a thickness
between 45 and 85mm.
Twist the disc from the clamp
3
and then
twist and remove the clamp
attachment
4
.
Determine the thickness of your desk.
Depending on that, place the desk
clamp
3
in the upper or lower notches
and tighten the bolts
8
.
Drill a 10mm hole through your desk.
CHECKLIST.
Does the tick.
Check the VESA size of your
monitor. at way, you can
be sure it fits on the monitor
arm. e screw holes of the
VESA plate and your
monitor have to match.
Do you have a question?
Coolblue.nl/en/
customer-service
Coolblue isn’t liable for any
injury, damage, or arguments
with your partner caused by a
wrong installation.
EN
STEP 1.
Place the stand
5
on the tube
6
and
tighten it with the screw
8
.
44


Product specificaties

Merk: BlueBuilt
Categorie: Niet gecategoriseerd
Model: BBMA2M

Heb je hulp nodig?

Als je hulp nodig hebt met BlueBuilt BBMA2M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd BlueBuilt

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd