La Crosse Technology TX151 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology TX151 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
W I R E L E SS
TE M P E R ATU R E S E N S O R
Model: TX151
DC: 110620
WA R R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this 1-year limited time warranty
product relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CAR E + M A I N T E N A N C E
• Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
Promptly remove expired batteries.
F C C S TAT E M E N T
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WARNING: This product can expose you to chemicals including styrene, which is known to
the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Page | 4
For more product information visit: bit.ly/laxtech_support
Power up
Insert 2-AAA batteries into your Outdoor Sensor. • Insert the mounting screw through the front of the sensor and into
the wall.
• Tighten the screw to snug (do not over tighten).
• Mount the temperature sensor on a north-facing wall or in any
well shaded location. Sun will make it read high.
• Under an eave or deck rail is preferred.
• Be sure the outdoor sensor is mounted vertically to drain
moisture.
• The maximum wireless transmission range to the weather station
is over 197 feet (60 meters) in open air, not including walls or
floors.
Watch sensor mounting video: bit.ly/TH_SensorMounting
Position Sensor
Specications
Temperature Range: -40°F to 140F (-40°C to 60°C)
Transmission Range: Over 197 feet (60 meters)
in open air RF 433MHz
Update Interval: About every 50 seconds
Power Requirements: 2 “AAA” LR3 Batteries (not included)
Battery Life: Over 12 months with reputable batteries
Dimensions: 4.72” x 0.79” x 1.77” (12.0 cm x 2.0 cm x 4.5 cm)
Page | 2 Page | 3
AAA
AAA
Refer to the owner’s manual for your clock or weather station to
see if you can Search for Sensor. If so, enable a search and press
the TX button (transmission) on your sensor.
If there is no Search option, try this:
1. Bring your sensor inside next to the station and remove
batteries from both devices.
2. Press any button at least 20 times, and then wait 15 minutes.
3. After the wait, install fresh batteries into both your sensor and
station. Your outdoor temperature should return within the next
few minutes.
4. Keep your sensor next to the station for another 15 minutes to
establish a strong connection.
5. Once connection is reestablished, place sensor outside in a
shaded location.
Power up as a Replacement Sensor


Product specificaties

Merk: La Crosse Technology
Categorie: Niet gecategoriseerd
Model: TX151

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology TX151 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd La Crosse Technology

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd