JETI TD0807W Handleiding

JETI Radiografisch bestuurbaar speelgoed TD0807W

Lees hieronder de 📖 handleiding in het Nederlandse voor JETI TD0807W (7 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

Manual DITEX-Manager

Manual Soware DITEX-Manager

With this guide, we show you how the software DITEX manager should be applied in individual servo

programming. The software can be download from www.Ditex-Servo.com. For more information,

please visit www.Ditex-Servo.com, Hacker-Motor.com or our YouTube video channel.

To program a Ditex servo first install the software. For programming the servos the USB interface

(Hacker part number 87201006) is required.

Open the software and connect the USB interface to your computer. The LED of the interface lights

up green when the connection is successful. Thereafter, plug the servo to the interface and the soft-

ware will open automatically. The servo confirms this with a tone sequence.

If you click the "question mark" in the top left to open the main menu

of the software, there are some basic settings of the software that can

be changed .

Here you can change the language.

In the Sound menu, the sound of the software can be changed or turned off

The design of the software can be chosen to your own preferences

Here you can load the update to the currently connected servo.

When pressing this button, the Manager is restored to the original state.

General information

Any changes that need to be performed on the servo-soware have to be conrmed by

Otherwise the sengs will be not saved in the servo!

Manual DITEX-Manager

SETUP

Adjusng the servo center posion .

Maximum travel A

Maximum travel B

max. Limit travel A

max. Limit travel B

Changing servo direcon

The mode "NARROW" is for specic applicaons that require a higher drive

frequency. For all other applicaons u the "NORMAL" mode. se

Adjust the servo-speed

Possibility of reducing the maximum servo-torque

The servo drives for the set me is with full torque, this allows a more sensi-

tive control to the zero posion.

Here you can choose how the servo on disconnuaon of the servo pulses

should behave by the receiver. This mode is only acve when an interrup-

on of the signal cable, or if the receiver is in acve fa -safe with no servo il

output pulses.

Servo-speed to the specied fail-safe posion.

Posion where the servo drives when signal loss. ,

Manual DITEX-Manager

Prevents a sudden start of the servos when turning on the model. The servos

drive the zero posion at set speed and force. We recommend to let the so

start acve, this conserves the servo, linkage and the model.

Here are the current posion of the servo is displayed in degrees.

This is a servo tester enables you to move the servo.

Also used to control the travel sengs that you

made.

This is a special feature for adjusng the center of a rudder. If you have

connected the servo to the linkage and the rudder, press the icon "DISEN-

GAGE". Now you can bring the rudder by hand in zero posion. Then press

the icon "ENGAGE" and the servo saves the current posion as the new

zero posion. Pressing the icon "SET NEUTRAL" always moves the servo to the programmed center

posion.

SECURITY

Here, the maximum internal power temperature is set at which the servo

outputs an audible warning and the power limit is enforced. This is a secu-

rity feature to the servo from overheang by example treacly / blocking a

linkage to protect. We recommend these values to change only in individual

cases or in special applicaons.

In fall below or exceed the adjusted voltages the servo will warn acous-

cally when you enable this feature in the sound monitor.

Product specificaties

Merk:	JETI
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	TD0807W
Kleur van het product:	Black, Red
Gewicht:	32 g
Breedte:	10 mm
Diepte:	30 mm
Hoogte:	35 mm
Soort:	Radio-Controlled (RC) Model Parts
Correct gebruik:	Universeel
Materiaal:	Metaal
Merkcompatibiliteit:	JETI
Aantal:	1
Spanning:	4.8 - 10 V
Type product:	Servo-
Type motor:	Kernloze motor
Frequentie microprocessor:	80 MHz
Koppel (@6 V):	6.1 kg/cm
Snelheid (@60°, 6 V):	0.11 s
Torsie (@ 7,4 V):	6.6 kg/cm
Snelheid (@60°, 7,4 V):	0.1 s