JETI JEX-MBT-DC-DS Handleiding

JETI Radiografisch bestuurbaar speelgoed JEX-MBT-DC-DS

Lees hieronder de 📖 handleiding in het Nederlandse voor JETI JEX-MBT-DC-DS (4 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Welcome to the RCDroidBox bluetooth adapter!

Device description

RCDroidBox allows real-time monitoring and recording of telemetry data transferred using JETI

Duplex or Duplex EX protocol. The system consists of both hardware and a software part. The

hardware is the actual RCDroidBox Bluetooth adapter and the software is an application running on a

device with the Android operating system, such as cell phone or tablet. The application is available

free of charge on Google Play - JATAYA systems - RCDroidBox

Requirements

JETI DC/DS transmitter

System interconnection

For the proper operation, connect the device to the

JETI DC/DS transmitter using the included cable as

shown in the picture. The device is powered from the

transmitter, it is not necessary to connect another

power source. In the transmitter it is necessary to

activate telemetry data in the internal connector

(PPM input / output, pages 24 and 40 in the manual

for DC-16, DS-16, DS-14 FW3.00). This will be done

in the transmitter menu Main Menu - System -

Configuration - PPM output type, where Telemetry EX is selected (see the DC-16, DS-16, DS-14

FW3.00 manual, pages 125-127).

Bluetooth connection

A typical Bluetooth connection range is around 3m, but this also depends on other factors such as

phone type, weather, obstacles between the RCDroidBox and the cell phone, etc. The whole system

is based on the assumption that the Android application is operated by pilot him/herself or his/her

assistant who is nearby. When used like this, there will be no problems with the Bluetooth connection.

Basics of RCDroidBox and Android application

Getting to know RCDroidBox We suggest that you try out RCDroidBox first at home or

somewhere quiet with an internet connection. Both the RCDroidBox and the Android application are

Android 2.3.3

and higher

Name RCDroidBox

Description Bluetooth adapter

Variant JETI Duplex - external (JETI_ext)

Producer JATAYA systems s.r.o. & JETI model s.r.o.

Technical details

Operating Voltage DC (V)..............3.5 – 4.5V

Typical current consumption (mA)..............20

Maximum current consumption (mA).........60

Standby current consumption (mA).............1

Operating temperature (ºC).......... -15 to +50

Relative humidity %...................................90

Dimensions (mm).........................38 x 20 x 7

BT Transmit power (dB)............................< 4

1.........Telemetry input connector - Ext.

2.........LED status indication

3.........Internal Bluetooth antenna

Bluetooth

sufficiently documented, follow well-established usage and their use is intuitive. However, it is still

better not to be distracted by worries about the model aircraft, the bright sun or a flat phone battery

etc. when trying the product out for the first time. A smaller number of active BT devices will also

make it easier to choose the right one when connecting for the first time

Android application distribution The Android application which allows the visualization

and administration of the RCDroidBox data is available free of charge on Google Play. Even though

the application is free, Google Play requires users to create a user account. If you do not already

have a Google Play user account, then you will need to go through a simple process to set one up.

In order to install the RCDroidBox application you will need to go to Google Play, search for “JATAYA

RCDroidBox“ and then click on install. After approving the installation you will have the application

ready for use. Google Play will automatically remind you of any future updates for the application

Bluetooth connection security RCDroidBox is protected against unauthorized access using

a four digit PIN code. You will need to enter this code only once (during the so called “pairing“), as

your cell phone or tablet will remember the code. The primary purpose of this protection is to prevent

accidental or deliberate connection to your RCDroidBox by somebody else.

Firmware updates RCDroidBox continues to be developed further. In order to provide

everybody with the most recent features, improvements and bug fixes, a so-called "firmware update

mechanism" is built into the RCDroidBox. The Android application can automatically detect if the

firmware is the most recent, and if not, it automatically offers to update it.

First start and the configuration of the device

1) Selection of the device for pairing Connect the power supply to your RCDroidBox. The

status LED indicates by periodic flashing that the device is waiting for the Bluetooth connection. In

the Android device run the application and from the main menu choose the →[RCDroidBox device]

[Find RCDroidBox device]. From the displayed list choose the device named "RCDB_NewBorn". After

the selection is done you will be forwarded back to the main menu of the application.

2) Change of the device name and PIN You will be prompted to change the device

name and PIN on first usage of the [Telemetry] [Maps] [Jetibox], or menu items. The change of the

device name and PIN must be made as the device cannot be used if the PIN or name have the

factory default values i.e. the PIN is "1111" and the name is "RCDB_NewBorn“ or “RCDB_ReBorn“.

These must be changed.

Go to the application main menu and choose the [Telemetry] item. In approximately 5 seconds there

will be the dialog box shown prompting for the PIN entry. Enter the PIN "1111" and press . Wait[OK]

another 5 seconds for the dialog box which will prompt you for the personalized device name and

PIN. Enter the new PIN you have chosen (different from "1111") and press . Wait 30 seconds[Save]

until you will be prompted for re-entry of your new PIN. Enter your new PIN code once again.

3) If the newer version of firmware is available for RCDroidBoxFirmware actualization

the menu item is activated in the main menu. If this item is active in your[Update firmware]

application menu, choose it and perform the actualization. The actualization of firmware begins

30s after the layout (screen) is displayed. Wait for specified duration to expire and do not leave

the screen. If the actualization is performed correctly, or if the actualization was not requested

by the program, you can start to use your RCDroidBox device.

Main menu of Android application

Most of the application functionalities require the RCDroidBox device to be connected. With no

connection available the viewing of stored logs, stored model settings configuration and setup of

sensors and alarms will be possible. Menu items which are only usable while connected to

RCDroidBox are marked in the list below as .[on-line]

Although the update should not take more than one minute, it is a sensitive operation

and once started it must not be aborted. The update requires a stable Bluetooth

connection between the cell phone and the RCDroidBox. Please ensure that both cell

phone and device battery are fully charged and the Bluetooth connection is stable.

Telemetry display

The layout for telemetry values display is accessible from the menu [Telemetry]. The diagram shows

the position and description of the main components with their names as they will be used subse-

quently in the following text.

Text display area controls

The measurement type is assigned to the text display area from the menu [Connect sensor].This

menu is triggered by a long press on the text display area. Once the measurement type is assigned

to the text display area, the display parameter can be adjusted from the menu [Display options]

which is triggered by the short touch. The periodical audio output can be turned on or off by the short

touch to the repro icon, or from the [Display options] menu.

Usage of the graph display layout

Once the graph is in the the axes and the graph lines for the selected measure-[Graph basic state]

ment types are displayed. If the is on, then the control icons are displayed. If[Configurational overlay]

the is on, then the tools for measurements are displayed.[Analytical overlay]

[Graph basic state] allows viewing the graph lines, to move the display along the time axis (to the

left or right) and to zoom on this axis. If the graph is unlocked the move and zoom are[Lock zoom]

Telemetry [on-line]

Textual, graphical and audio data presentation

Maps [on-line]

Path drawing on the map

Jetibox [on-line]

Jetibox terminal

Settings (icon in top status bar)

Preferences; Advanced functionalities

Models

Stored models, sensors administration; Alarms

Stored logs

Viewing of stored logs

RCDroidBox device [on-line]

Device name and PIN change; Finding new device

Properties (System menu on each layout)

Settings for the given screen layout

MIN

MAX 12,8

10,4

Current

9,3 m/s

18,6

20,3

Speed

11,8 A

AVG

MAX

rio

tit

]

/s]

Bluetooth | RCDB | TLM

Indication and control of

periodical audio output

5,14 V |

Name of displayed

measurement type

Counted (derived)

values

Actual value of the

measurement type

Text display area of

telemetry data

Left vertical

axis area

Measure-

ment type

and the

name of

the sensor

Right vertical

axis area

Connection status; Green

items are active - OK. Yellow

collor indicates connection

attempts. Red – connection

failed.

Scanning ...

Textual menus

scan log

Voltage of the RCDroidBox

power supply

Indication of

measurement

types available

from sensors

RCDB – RCDroidBox

TLM – telemetry input – Ext.

Graph control icons

- Reset zoom, offset

- Lock zoom

- Remove measurement type

- Add measurement type

Axes display

type switch Graph area

Measurement

type switch Scale setup

arrows

Easy

Model name

Product specificaties

Merk:	JETI
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	JEX-MBT-DC-DS
Kleur van het product:	Zwart
Gewicht:	15 g
Breedte:	38 mm
Diepte:	20 mm
Hoogte:	7 mm
Soort:	Radio-Controlled (RC) Model Parts
Certificering:	CE
Spanning:	3.5 - 15 V
Bedrijfstemperatuur (T-T):	-15 - 50 °C
Type product:	Bluetooth-adapter
Stroom (max.):	0.02 A