ILive IAEBT40 Handleiding

ILive Oordopje IAEBT40

Lees hieronder de 📖 handleiding in het Nederlandse voor ILive IAEBT40 (2 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Charging the Case
Using a cable (included), USB-C to USB
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case. When the case is
charging the Power & Battery Indicator LEDs
will ash blue. When fully charged all LEDs will
turn solid blue.
Truly Wire Free Earbuds
User’s Guide for Model IAEBT40 v2712-01
Power & Battery Indicator LEDs
The 4 blue LEDs represent the amount of battery
the case charger has.
1 LED=25%
2 LEDs=50%
3 LEDs=75%
4 LEDs=100%
Function Button
Press and hold for 5 seconds to power ON/OFF.
Press to play/pause music.
Press to answer/end phone calls.
Press and hold for 2 seconds to reject incoming calls.
Press and hold for 2 seconds to activate voice assistant. (SIRI or Google assistant)
Quickly press twice to skip to next track (RIGHT).
Quickly press twice to play previous tracks (LEFT).
Quickly press three times to turn volume up (RIGHT).
Quickly press three times to turn volume down (LEFT).
Charging Contacts
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts.
Be sure to match the left and right earbuds with the correct
docking station in the case.
2. When charging, the rst and fourth Power & Battery Indicator
LEDs on the case will ash blue. When charging is complete, the
indicator LEDs will turn o.
3. will turn red when charging. When fully Earbud Indicator LEDs
charged, the LEDs will turn o.
Earbud Indicator LED/Microphone
Red when charging.
Lights o when fully charged.
Speakerphone
• To accept or end a phone call, press the Function button.
• You can also use the controls on the connected phone to
handle phone functions.
Charging Case & Auto-On Feature
While the case power is ON:
• Placing the earbuds in the charging case will
automatically power them o and begin charging.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
Pairing Bluetooth
Note: When earbuds are powered on they automatically
link and enter into pairing mode. You can power on a single
earbud to use as a single unit if you wish.
1. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on the right earbud
will continue ashing blue and red, indicating it is ready
to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select when IAEBT40
it is discovered. When successfully connected to your
Bluetooth device, the LED indicator on both of the
earbuds will ash blue, slowly and a voice prompt will
announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
Customer Support
Customer Service: | Email Support: 1-888-999-4215 prodinfo@
dpiinc.com partsinfo@dpiinc.com | Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2021 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.

Product specificaties

Merk: ILive
Categorie: Oordopje
Model: IAEBT40

Heb je hulp nodig?

Als je hulp nodig hebt met ILive IAEBT40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Oordopje ILive

ILive

ILive IAEB29 Handleiding

31 Maart 2024
ILive

ILive IAEBT40 Handleiding

31 Maart 2024
ILive

ILive IAEBT270 Handleiding

31 Maart 2024
ILive

ILive IAEBT411 Handleiding

31 Maart 2024
ILive

ILive IAEBT209 Handleiding

31 Maart 2024
ILive

ILive IAEBT300 Handleiding

31 Maart 2024
ILive

ILive IAEB109 Handleiding

30 Maart 2024
ILive

ILive IAEP48B Handleiding

25 Juli 2023
ILive

ILive IAEB25B Handleiding

25 Juli 2023
ILive

ILive IAEB25 Handleiding

25 Juli 2023

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje

Cellular Line

Cellular Line Roller Clip Classic Handleiding

18 December 2024
JVC

JVC HA-C300 Handleiding

14 December 2024
JAYS

JAYS t-Two Handleiding

14 December 2024
BlueAnt

BlueAnt X5i Handleiding

8 December 2024
BlueAnt

BlueAnt Pump Air Ultra Handleiding

8 December 2024
JBL

JBL Reflect Aero Handleiding

8 December 2024
Audio-Technica

Audio-Technica ATH-TWX7 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATH-SQ1TW2 Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATH-MVL2_JV Handleiding

6 December 2024
Audio-Technica

Audio-Technica ATH-CKS30TW Handleiding

6 December 2024