ILive IAEBT270 Handleiding

ILive Oordopje IAEBT270

Lees hieronder de 📖 handleiding in het Nederlandse voor ILive IAEBT270 (2 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Truly Wire-Free Earbuds
Users Guide for Model IAEBT270 v2470-01
Volume/Skip
Press to adjust volume.
Press and hold to skip ahead
or back.
LED Indicator
Flashing red and blue= Ready to pair
Solid red= Charging
Note: When fully charged the light
will change to blue for a few seconds
and then turn o.
Function Button
Press and hold to power ON or OFF.
Press to play or pause audio.
Press to answer incoming phone call.
Press quickly 2 times to manually pair.
Orientation & Controls
Controls are the same on both earbuds.
Charging the Case
Note: Placing the earbuds in the case will automatically
power them OFF.
• Using a cable, connect to the USB USB-C to USB
port of a powered on computer or USB power
adaptor (Not included).
• Initial charge time is approximately 2 hours.
Charge fully before use.
• While the case is charging, the will Case LED
display a blinking red light. When the unit is fully
charged it will display a solid red light.
Features
• True Wireless Stereo
• Sweat proof
• Bluetooth Wireless: range 49 ft.
• Built-in microphone
• Voice prompts announce earbud
operations
• Digital volume control
• Built-in rechargeable battery:
approximately 5 hrs playtime at 50%
• USB-C port for battery recharge
Includes
• 3 pairs of eartips: 1 small, 1 medium,
1 large
• Charging case
• USB-C to USB charging cable
• Users Manual
Charging Contacts Case Power
Button
Press to activate
charging.
Case LED
Solid blue when ON.
Place earbuds onto
Charging Contacts
in the case to start
charging.
Customer Support
Customer Service: | Email Support: 1-888-999-4215 prodinfo@
dpiinc.com partsinfo@dpiinc.com | Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
FCC Warnings
WARNING: Changes or modications to this unit not extaply approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
To avoid hearing damage, make sure that the volume on your
music player is turned down before connecting your headphones.
After placing headphones in/on your ears, gradually turn up the
volume until you reach a comfortable listening level.
Speakerphone
1. To accept a call, press the Function button, or use the
controls on the connected phone.
2. To end a call, press the or use the Function button,
controls on the connected phone.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal
regulations.
Previously Connected Devices
• Once the earbuds have been linked and
connected to a device, the earbuds will auto
power ON, link and connect to the last Bluetooth
device whenever removed from the case.
• To manually pair to another device, press the
Function button quickly two times. The earbuds
will enter pairing mode and can connect to a
new device.
• To re-connect to a dierent device, turn o
Bluetooth on unwanted devices, then access the
Bluetooth settings menu on the device you wish
to use and select IAEBT270.
Troubleshooting
If the earbuds experience any static, delay or cutting
out of sound follow these steps.
1. Make sure the earbuds are fully charged.
2. Power the earbuds OFF, then ON again. Let them
reconnect automatically and try playing audio
again. Repeat if needed.
Made
Green
Initial Linking of Earbuds &
Pairing to a Bluetooth Device
To link the earbuds:
Removing the earbuds from the case will automatically POWER
them ON and link them after a few seconds. If not, each
earbud must be powered ON seperately if they were manually
powered OFF and they will automatically link to each other
after a few seconds. A prompt will also announce the link. Once
earbuds are linked, powering OFF one earbud will power OFF
both earbuds.
1. With the earbuds linked, you can now connect to
your Bluetooth device. The on one LED Indicator
of the earbuds will begin ashing blue and red,
indicating it is ready to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth
Settings and search for nearby devices.
Select when it is discovered. When IAEBT270
successfully connected to your Bluetooth device,
the LED indicator will slowly ash blue and a
voice prompt will announce the connection.
3. Audio played through the connected Bluetooth
device will now be heard through both earbuds.
Use the controls on the connected device or
earbuds to play audio and adjust volume.
PLEASE NOTE: Due to the nature of truly
wireless earbuds, you may experience
slight interruptions with your audio in
areas with multiple 2.4Ghz bands or in
high wireless trac areas.
If the earbuds should become unpaired or will not
connect normally, open your devices Bluetooth
Settings Menu and follow these steps:
1. Disconnect, then reconnect to the earbuds.
2. If the problem persists, delete the earbuds from
the list of available devices(“Forget This Device”).
3. Turn Bluetooth OFF then ON again, and repeat
the steps.Initial Bluetooth Connection


Product specificaties

Merk: ILive
Categorie: Oordopje
Model: IAEBT270

Heb je hulp nodig?

Als je hulp nodig hebt met ILive IAEBT270 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oordopje ILive

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje