HP Aruba AP-565 Handleiding

HP Access point Aruba AP-565

Lees hieronder de 📖 handleiding in het Nederlandse voor HP Aruba AP-565 (12 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Aruba 560 Series Outdoor Access Points

Installation Guide

Rev 02 | July 2021 1

The Aruba 560 Series outdoor wireless access points (AP-565 and AP-567) are high-performance, multi-radio

wireless devices that can be deployed in either controller-based (ArubaOS) or controllerless (Aruba Instant)

network environment.

The Aruba 560 Series access points support IEEE 802.11ax standard, delivering high performance with the MIMO

(Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g/n/ac wireless services.

Package Contents

560 Series access point

Cable gland x 1

USB Type-C console cable x 1

Grounding lug and M4x6 screw x 1

Tools Required

Phillips screwdriver (#2 for M4x6 screw)

Flat blade screwdriver (Ethernet cable gland cover)

8mm allen or hex key (USB console cover)

The weatherproof caps for Ethernet and Console interfaces are connected to the access point, not loose in the

package.

Mounting kits for use with the 560 Series access points are sold separately. Contact your Aruba sales

representative for details.

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,

including the original packing materials. Use these materials to repack and return the unit to the supplier if

needed.

2Aruba 560 Series Outdoor Access Points | Installation Guide

Hardware Overview

Figure 1 560 Series Access Point

LED

The 560 Series access point is equipped with one LED that indicates the system status of the access point.

Table 1 560 Series LED Meanings during Boot Up

LED Color/State Meaning

System LED Off No power to AP

Red Initial power-up

Green - Flashing AP booting, not ready

Green - Steady AP ready and Gigabit Ethernet connected. The LED turns off

after 1200 seconds

Green - Yellow, 6 seconds

period

AP ready and 10/100Mbps Ethernet link established. The LED

turns off after 1200 seconds

USB Console Port, Reset

button and LED

Grounding PointEthernet PortAir Vent

Aruba 560 Series Outdoor Access Points | Installation Guide 3

Table 2 560 Series LED Meanings during Operation

Ethernet Port

The 560 Series access point is equipped with one Ethernet port (E0). The Ethernet port is 100/1000Base-T auto-

sensing MDI/MDX, which supports uplink connectivity when linked by an Ethernet cable.

Power

The Ethernet port supports PoE-in, allowing the AP to draw power from an 802.3af/802.3at PoE power

source.The 560 Series access point supports the Intelligent Power Monitoring (IPM) feature that actively

measures the power utilization of the AP and dynamically adapts to the power budget.

Table 3 lists operational restrictions when the AP is powered by different power options.

Table 3 Power Options and Operational Restriction

Grounding Point

Always remember to protect the access point by installing grounding lines. The ground connection must be

complete before connecting power to the access point enclosure.

USB Type-C Console Port

Use the included USB Type-C console cable to connect the access point to a laptop or a serial terminal for direct

management.

Reset Button

The reset button can be used to reset the access point to factory default settings or turn off/on the LED display.

There are two ways to reset the access point to factory default settings:

Reset the AP during normal operation

Press and hold down the reset button using a small, narrow object such as a paper clip for more than 10

seconds during normal operation.

LED Color/State Meaning

System LED Solid Red General fault - Immediate attention required

One blink off every 3

seconds

Radio 0 fault (5 GHz)

Two quick blink off 0.5

seconds apart cycled every

3 seconds

Radio 1 fault (2.4GHz)

Power Source IPM Restrictions

802.3at PoE n/a No restrictions, all capabilities available.

802.3af PoE enabled AP starts up in unrestricted mode, but may dynamically

apply restrictions depending on the PoE budget and actual

power.

802.3af PoE disabled 2.4GHz radio is restricted to 1 spatial stream.

You need a proper 8mm allen or hex key to open the cover of the USB Console port.

Product specificaties

Merk:	HP
Categorie:	Access point
Model:	Aruba AP-565
Kleur van het product:	Wit
Gewicht:	1030 g
Breedte:	165 mm
Diepte:	165 mm
Hoogte:	110 mm
Bluetooth:	Ja
Plaatsing:	Pole, Wall
Bluetooth-versie:	5.0
USB-connectortype:	USB Type-C
Aantal Ethernet LAN (RJ-45)-poorten:	1
Vermogensverbruik (max):	15.6 W
MIMO:	Ja
Modulatie:	16-QAM, 64-QAM, 256-QAM, 1024-QAM, BPSK, CCK, QPSK
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt
Ondersteunde beveiligingsalgoritmen:	WPA2, WPA3
Soort antenne:	Intern
Antenne versterkingsniveau (max):	5.4 dBi
Temperatuur bij opslag:	-40 - 70 °C
MIMO-type:	Multi User MIMO
Hoogte, in bedrijf:	0 - 3000 m
Maximale overdrachtssnelheid van gegevens:	1774 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Ja
Antennefuncties:	Ingebouwde antenne
Maximale overdrachtssnelheid van gegevens (2.4 GHz):	574 Mbit/s
Maximale overdrachtssnelheid van gegevens (5 GHz):	1200 Mbit/s
MDI / DMI-X automatische omschakeling:	Ja
Bedrijfstemperatuur (T-T):	-40 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Type antennerichting:	Omni-directioneel
Spread spectrum methode:	DSSS, OFDM, OFDMA