TP Link RE6000XD Handleiding

TP Link Access point RE6000XD

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link RE6000XD (2 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

7106509796 REV1.0.0

Power On

Quick Installation Guide

Range Extender

Next to

Solid On

Relocate

Set Up

1. Plug in the extender about between your router and the Wi-Fi dead halfway

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,

relocate the extender closer to the router to achieve better signal quality.

Enjoy!

· Connect your devices to the extender wirelessly or via an Ethernet cable,

then enjoy the internet. The password of your extended network is the same

as your host router.

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

Via the Tether App

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Via the Tether App

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

Note: If the LED does not turn solid on, please

refer to > .FAQ Q2

2. Launch the Tether app and log in with your

TP-Link ID. If you don’t have an account,

create one first.

Welcome to Tether

TP-Link ID (Email)

Password

3. Tap the button and select .Range Extender

Tether

Scan for Tether

Note: If you cannot find your device, please refer to

FAQ > .Q1

For more details, please refer to the user guide at

https://www.tp-link.com/support/download.

More Setup Methods

Via a Web Browser

1. Connect your computer or smartphone to

the extender’s network TP-Link_Extender.

2. Visit http://www.tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

3. Follow web instructions to complete the setup.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should

change from blinking to solid on, indicating

successful connection.

1. Press the WPS button on your router.

Via the WPS Button

3. If the extender connects to a dual band router,

repeat steps 1 and 2 to connect to the other

band.

Extended Network Names:

Router’s network name with

EXT

at the end

Same as your OneMesh router

(See back for OneMesh details)

Passwords:

Same as your router

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

* Images may differ from your actual product.

Plug the extender into a power outlet next to your router. Wait until

its Power LED turns solid on.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings

via the Tether app and go to Tools Location Assistant> , or simply scan the QR code

to visit https://www.tp-link.com/support/faq/3103/.

Mount

Method 1: Desktop Mounting

1. Mount the extender on the bracket as shown below.

2. Place the extender vertically on a horizontal surface (such as a desktop or

shelf) that is out of children’s reach.

Method 2: Wall Mounting

1. Secure the bracket to the wall in the correct direction with two suitable screws

(not provided).

Note: The length of the screw needs to be at least 20 mm to withstand the weight of the product.

2. Attach the extender to the bracket as shown below.

My Devices

No devices found.

Choose Your Device Type

Wireless Router

Gaming Router

Range Extender

Solid On

4.67mm<D<8mm

d<4.0mm

H<3mm

Screw Specifications:

· You can also change the extender to to transform your Access Point Mode

existing wired network to a wireless one. For details, see Access Point Mode

(AP Mode) on the back page.

Q1. What should I do if the Tether app cannot nd my device during

setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender’s network .TP-Link_Extender

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

Make sure the extender is close to your router, preferably within 16 feet, and away

from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMeshTM with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/onemesh/compatibility.

IN T ER N ET

SAME

Network Name & Password

for seamless roaming

LED Explanation

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, is recommended.Method 1

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

< Settings

My Devices

Local Device

RExxx

XX-XX-XX-XX-XX-XX

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the button for 1 second RESET

to reset the extender to its factory default settings.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

For technical support, replacement services, user manuals and other information,

please visit https://www.tp-link.com/support, or simply scan the QR code.

To communicate with TP-Link users or engineers, please join the TP-Link Community

at https://community.tp-link.com.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended.

• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use this

product with care and operate at your own risk.

RESET

If you need more setup help, please visit

https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

AX6000 Wi-Fi 6 Range Extender RE900XD/RE6000XDModel:

Tether

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://www.tplinkrepeater.net in the address

bar, and log in.

3. View or change extender settings as needed.

http://www.tplinkrepeater.net

To change your extender to , do the following: Access Point Mode

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the 5GHz

wireless network of your router.

5G On/O

The extender is connected or not connected to the 2.4GHz

wireless network of your router.

2.4G On/O

The extender is on or o.

The system is starting up or rmware upgrade is in progress.

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it

closer to your router.

WPS connection is in progress.

No wireless connection is established.

Solid blue

Solid red

Blinking

O

(Power)

(Signal)

LAN port 1/2/3 is connected.

LAN port 1/2/3 is not connected.

O

b. By Tether: Login Tools Operation Mode → →

Access Point Mode (AP Mode)

a. By Web: button on top. Login Mode → Find the

For details, refer to the user guide at .https://www.tp-link.com/support

English

Mode Logout Reboot

Home Clients Tools

Operation Mode

System Time

System

Product specificaties

Merk:	TP Link
Categorie:	Access point
Model:	RE6000XD
Kleur van het product:	Wit
Breedte:	189 mm
Diepte:	59 mm
Hoogte:	200 mm
Plaatsing:	Tafel
Wi-Fi-standaarden:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Snelstartgids:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	3
Vermogensverbruik (max):	18 W
Certificering:	FCC, RoHS
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Ethernet LAN, data-overdrachtsnelheden:	1000,2500 Mbit/s
Ondersteunde beveiligingsalgoritmen:	WPA, WPA2-PSK, WPA3
Temperatuur bij opslag:	-40 - 70 °C
Reset button:	Ja
Maximale overdrachtssnelheid van gegevens:	- Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Nee
Maximale overdrachtssnelheid van gegevens (2.4 GHz):	1148 Mbit/s
Maximale overdrachtssnelheid van gegevens (5 GHz):	4804 Mbit/s
WPS Push Button Security:	Ja
Wifi:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Stroomverbruik (typisch):	9.2 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
6 GHz:	Nee