TP Link TL-WPA1000 Handleiding
TP Link
Access point
TL-WPA1000
Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link TL-WPA1000 (4 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Ethernet Cable
Extender
TL-WPA7517
Adapter
TL-PA7017
Powerline
1
* European version is used for demonstration in this guide.
Plug the adapter into a power outlet
and connect it to the router’s LAN
port via an Ethernet cable.
2
Tip:
Want to unify or personalize your network? See the back
page for instructions.
Plug the extender into a power outlet on the same electrical circuit.
Wait until the extender’s Powerline LED turns on.
Note: If the LED is o, please refer to FAQ > .Q2
3
Connect your devices to the internet using the default SSID (network
name) and password on the label at the top of the extender.
Attention
2. Plug powerline devices into wall outlets instead of power strips.
Note: Using power strip will aect network performance or even cause connection drops.
1. Use the product only in the upright direction.
Wall Outlet Power Strip
Quick Installation Guide
Plug and Play
Router
WAN LAN
* Images may dier from actual products.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
On
SSID:TP -LINK_XXX X
SSID:TP -LINK_XXX X_5G
Wireless P worass d:XXXX XXXX
©2022 TP-Link 7106509478 REV2.0.0
LEDs & Buttons
Personalize Your Networks
Manage your powerline devices using any of the methods below. You
can change the SSID and password, set Wi-Fi schedules, create a guest
network and more.
TP-Link OneMeshTM router and extenders work together to form one unied
Wi-Fi network. Walk through your home and stay connected with the fastest
possible speeds thanks to OneMesh’s seamless coverage.
To check full list of TP-Link OneMesh TM devices, scan the QR
code, or visit https://www.tp-link.com/One-Mesh/compatibility.
Seamless Roaming
Devices automatically switch between your router and extenders as you move
through your home for the fastest possible speeds.
Unied Wi-Fi Network
Router and extenders share the same wireless settings, including network name,
password and more.
Easy Setup and Management
Easily set up and manage a unied Mesh network.
OneMeshTM with Seamless Roaming
Scan to download tpPLC App
tpPLC Utility
For easy management via your computer, download the utility at
https://www.tp-link.com/support/download/.
Note: For detailed instructions, refer to the utility manual on the product’s Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit
http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the product’s Support page.
tpPLC App
For easy management via your smartphone or
tablet, download the app from Apple App Store or
Google Play, or simply scan the QR code.
Unify Your Wi-Fi Networks
Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each other when pairing.
Note: If your router doesn’t support the two methods below, refer to Personalize Your Networks section to manually change the extender’s Wi-Fi settings.
Copy SSID and password from your router via any of the methods below to create one unied Wi-Fi network throughout your home.
Create a Secure Powerline Network by Pairing
If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync
from the existing extender to the new ones.
Sync Wi-Fi Settings to More Extenders
Note: If the Power LED does not blink, press the Pair button again.
Press the Pair button on the adapter for 1 second. Its Power LED
should start blinking.
1
(Within 2 minutes) press the extender’s Pair button for 1 second. Its
Power LED should start blinking.
When the extender’s Powerline LED turns on, a powerline network
has been successfully created.
2
3
Method TWO: Via OneMeshTM
SAME
SSID & Password
3Enjoy the internet using your router’s SSID and password. Any changes to the
Wi-Fi settings of your router will be automatically copied to the extender.
1
2
Connect your computer to the extender wirelessly. Visit .http://tplinkplc.net
Go to and toggle on . When the OneMesh Join OneMesh extender’s Wi-Fi
LED turn solid on, Wi-Fi settings are copied.
Note: You can use this method when your router supports OneMesh TM.
Method ONE: Via Wi-Fi Button
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s Wi-Fi settings.
Plug in the extender in the same room as your router. Wait until the
extender’s Wi-Fi LED turns on.
Press your router’s WPS button. (Within 2 minutes) press the extender’s
Wi-Fi button for 1 second. The extender’s Wi-Fi LED starts blinking.
When it stays on, Wi-Fi settings are copied.
1
2
3 Relocate the extender and enjoy the internet using your router’s SSID
and password.
Note: You can use this method when your router has a WPS button.
Wireless Router Extender
Blinking
On
WPS/
WPS
Wi-Fi
Within 2 minutes
Adapter
TL-PA7017
Blinking
Extender
TL-WPA7517
Blinking
On
Within 2 minutes
DESCRIPTIONITEM
Press for 1 second to set up or join a secure powerline network.
Pair Button
Wi-Fi Button
LED Button
Press for 1 second to start copying Wi-Fi settings from the router.
Press and hold for about 5 seconds to turn Wi-Fi on or o.
Press for 1 second to turn on or o the LEDs.
Press and hold for at least 6 seconds, then release the button to reset the adapter/extender
to default settings.
DESCRIPTION
LED STATUS
Power
Powerline
Ethernet
On
O
The powerline adapter/extender is on.
Quickly: Pairing is in process.
Slowly: Power-Saving Mode is on.* (TL-PA7017 Only)
The powerline adapter/extender is o.
Blinking
Wi-Fi
The wireless function is enabled.
The powerline extender is syncing wireless network settings.
The wireless function is disabled.
* If the device connected to TL-PA7017 is turned o or inactive for more than 5 minutes, TL-PA7017 will
automatically switch to Power-Saving Mode.
On
Blinking
O
The Ethernet port is connected or not connected.
The powerline adapter/extender is connected to a powerline network.
The powerline adapter/extender is not connected to any powerline network.
On/O
On
O
Q1. How do I reset my adapter and extender to factory default settings?
A. Press and hold the Pair button for at least 6 seconds. Release the button and all LEDs turn o. When the
LEDs turn back on, the reset process is complete.
Q2. What should I do if the Powerline LED is o?
A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.
A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline network?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices
again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
Q4. What should I do if a successfully-paired extender does not reconnect after it is
relocated?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Try to pair the extender again, and make sure the Powerline LED is on.
A3. Check for possible interference due to a washing machine, air conditioner or other household appliances
that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical
socket to remove the electrical noise if your powerline device has an integrated electrical socket.
Frequently Asked Questions
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Plug the powerline devices directly into the wall outlets but not the power strips.
For technical support, replacement services, user guides, and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs for our product guides, you are welcome to
email techwriter@tp-link.com.cn.
To communicate with TP-Link users or engineers, please join the TP-Link
Community at https://community.tp-link.com.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use this
product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/
Product specificaties
| Merk: | TP Link |
| Categorie: | Access point |
| Model: | TL-WPA1000 |
Heb je hulp nodig?
Als je hulp nodig hebt met TP Link TL-WPA1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Access point TP Link
15 November 2024
3 Oktober 2024
4 Mei 2024
25 April 2024
26 Maart 2024
26 Maart 2024
26 Maart 2024
14 November 2023
12 November 2023
31 Augustus 2023
Handleiding Access point
- Access point Bosch
- Access point HP
- Access point Huawei
- Access point Asus
- Access point Honeywell
- Access point Airlive
- Access point Allied Telesis
- Access point Allnet
- Access point AVM
- Access point Buffalo
- Access point D-Link
- Access point Dell
- Access point Devolo
- Access point Digitus
- Access point Draytek
- Access point Edimax
- Access point Eminent
- Access point Engenius
- Access point EQ-3
- Access point Grandstream
- Access point Hercules
- Access point INCA
- Access point Interlogix
- Access point Lancom
- Access point LevelOne
- Access point Linksys
- Access point Media-tech
- Access point Mikrotik
- Access point Mojo
- Access point Netgear
- Access point Netis
- Access point Renkforce
- Access point Sitecom
- Access point SMC
- Access point Tenda
- Access point Trendnet
- Access point Zebra
- Access point ZyXEL
- Access point Macally
- Access point Steren
- Access point Ubiquiti Networks
- Access point Techly
- Access point Cisco
- Access point 3Com
- Access point Amped Wireless
- Access point Comtrend
- Access point CradlePoint
- Access point Juniper
- Access point Planet
- Access point Intellinet
- Access point Silex
- Access point Lindy
- Access point Black Box
- Access point Fortinet
- Access point DataVideo
- Access point Totolink
- Access point Dahua Technology
- Access point Mercusys
- Access point Aruba
- Access point EQ3
- Access point Homematic IP
- Access point Hawking Technologies
- Access point AMX
- Access point Moog
- Access point Crestron
- Access point StarTech.com
- Access point WatchGuard
- Access point LigoWave
- Access point Advantech
- Access point Moxa
- Access point Kingston
- Access point Vimar
- Access point Aerohive
- Access point Bountiful
- Access point V7
- Access point NUVO
- Access point Cudy
- Access point IP-COM
- Access point Syscom
- Access point Meru
- Access point Cambium Networks
- Access point Ruckus Wireless
- Access point Bintec-elmeg
- Access point Mach Power
- Access point ICC
- Access point Insteon
- Access point Brocade
- Access point Premiertek
- Access point Extreme Networks
- Access point Atlantis Land
- Access point FlyingVoice
- Access point Luxul
Nieuwste handleidingen voor Access point
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
1 December 2024
30 November 2024
15 November 2024