Hobart MG2032 Handleiding
Hobart
Vleesmolen
MG2032
Lees hieronder de 📖 handleiding in het Nederlandse voor Hobart MG2032 (8 pagina's) in de categorie Vleesmolen. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com
FORM 34389 Rev. B (Aug. 2001)
MG1532 & MG2032 MIXER-GRINDERS
MODEL
MG1532 ML-134099 7.5 HP Grind Motor + 1 HP Mix Motor
MG1532 ML-134103 5 Grind Motor + 1 Mix MotorHP HP
MG1532 ML-134100 7.5 HP Grind Motor + 1 HP Mix Motor w/ Side Feed
MG2032 ML-134104 7.5 HP Grind Motor + 1 HP Mix Motor
MG2032 ML-134105 7.5 HP Grind Motor + 1 HP Mix Motor w/ Side Feed
Previous models covered by this manual:
MG1532 ML-104878 7.5 HP Grind Motor + 1 HP Mix Motor
MG1532 ML-104883 5 Grind Motor + 1 Mix MotorHP HP
MG1532 ML-104879 7.5 HP Grind Motor + 1 HP Mix Motor w/ Side Feed
MG2032 ML-104884 7.5 HP Grind Motor + 1 HP Mix Motor
MG2032 ML-104885 7.5 HP Grind Motor + 1 HP Mix Motor w/ Side Feed
MIXER GRINDER-
– 2 –
©HOBART CORPORATION, 1997
MODEL MG1532 MIXER-GRINDER MODEL MG2032 MIXER-GRINDER
– 3 –
Installation, Operation, and Care of
MG1532 & MG2032 MIXER-GRINDERS
SAVE THESE INSTRUCTIONS
GENERAL
The MG1532 & MG2032 Mixer-Grinders are designed to use a #32 size knife and plate (knives and(42/46)
plates are available at extra cost but not included with grinder). Do not use a plate with hole size smaller
than 3/32".
The MG1532 Mixer-Grinder is equipped with either a 5 or 7 1/ 2HP Grind Motor and a 1 HP Mix Motor. The
MG2032 Mixer-Grinder is equipped with a 71/ 2HP Grind Motor and a 1 HP Mix Motor. On all models, the
worm rotates at 216 RPM RPM HP and the mix arm rotates at 23 . The MG1532 with 5 Grind Motor is for fresh
meat only, not for frozen product.
The inclined hopper permits lower, easier loading while the tilted worm provides a convenient output
height.
Releasing the latch handle allows the hopper guard (lid) to open easily — torsion springs counterbalance
the lid's weight.
The exclusive Hobart designed #46 Wedge cylinder
grinding end speeds product from hopper to grinding
end by pulling pieces of meat through the large upper
opening of the cylinder (Fig. 1).
The MG1532 & MG2032 Mixer-Grinders may be
ordered with any of the following options and/or
accessories:
1) Caster sets and / or adjustable leg sets. The
MG1532 & MG2032 Mixer-Grinders are equipped
with flexible power supply cord and plug. Either
a receptacle or a pendant type connector is
available. The receptacle requires a type FD
electrical box (not supplied).
2) Pneumatic foot switch accessory (can be easily
added at any time). Fig. 1
3) The hopper side-feed inlet can be ordered (and factory installed) for the right side of the hopper
to allow product from a companion first cut grinder to feed directly into the hopper. A plug assembly
for the side feed inlet, a drip cup, and adapter ring for the first-cut grinder are available accessories.
The MG1532 hopper can hold up to 150 pounds of fresh meat. The MG2032 hopper can hold up to
200 pounds of fresh meat. The can grind at a rate of 55 to 60 poundsMG1532 & MG2032 Mixer-Grinders
of fresh boneless beef per minute, first or second cut through a 1/8" plate. Pork can be ground first cut
through a 3/4" breaker plate and second cut through a 3/16" plate at 60 to 65 pounds per minute. Up to
60 pounds of frozen meat per batch (on units with 71/ 2HP Grind Motor only) can be ground from flake
or stick form when tempered to 26 F or higher and first grind is through a °3/8" or larger plate.
Product specificaties
| Merk: | Hobart |
| Categorie: | Vleesmolen |
| Model: | MG2032 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hobart MG2032 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vleesmolen Hobart
9 Augustus 2023
9 Augustus 2023
9 Augustus 2023
9 Augustus 2023
9 Augustus 2023
9 Augustus 2023
9 Augustus 2023
Handleiding Vleesmolen
- Vleesmolen Braun
- Vleesmolen Bosch
- Vleesmolen Philips
- Vleesmolen Panasonic
- Vleesmolen BEKO
- Vleesmolen Kenwood
- Vleesmolen Krups
- Vleesmolen Tefal
- Vleesmolen Ade
- Vleesmolen Adler
- Vleesmolen Afk
- Vleesmolen Amica
- Vleesmolen Ariete
- Vleesmolen Beem
- Vleesmolen Bestron
- Vleesmolen Buffalo
- Vleesmolen Duronic
- Vleesmolen ETA
- Vleesmolen Eurochef
- Vleesmolen Fritel
- Vleesmolen Gastroback
- Vleesmolen Gorenje
- Vleesmolen H.Koenig
- Vleesmolen Hyundai
- Vleesmolen Klarstein
- Vleesmolen Korona
- Vleesmolen Livoo
- Vleesmolen Maestro
- Vleesmolen Magic Chef
- Vleesmolen Magimix
- Vleesmolen Manta
- Vleesmolen Maxwell
- Vleesmolen Melissa
- Vleesmolen Mesko
- Vleesmolen Moulinex
- Vleesmolen MPM
- Vleesmolen Princess
- Vleesmolen ProfiCook
- Vleesmolen Redmond
- Vleesmolen Rotel
- Vleesmolen Saturn
- Vleesmolen Sencor
- Vleesmolen Silvercrest
- Vleesmolen Steba
- Vleesmolen Taurus
- Vleesmolen Ufesa
- Vleesmolen United Office
- Vleesmolen Vitek
- Vleesmolen Zelmer
- Vleesmolen Jata
- Vleesmolen Caso
- Vleesmolen Concept
- Vleesmolen Cuisinart
- Vleesmolen OBH Nordica
- Vleesmolen Profilo
- Vleesmolen Scarlett
- Vleesmolen Sinbo
- Vleesmolen Ardes
- Vleesmolen Eldom
- Vleesmolen Lümme
- Vleesmolen Prime3
- Vleesmolen Royal Catering
- Vleesmolen Weston
- Vleesmolen Nesco
- Vleesmolen RGV
- Vleesmolen Reber
- Vleesmolen Avantco
- Vleesmolen N8WERK
- Vleesmolen Fama
- Vleesmolen Globe
- Vleesmolen LERAN
- Vleesmolen Zeegma
- Vleesmolen WestBend
- Vleesmolen Pro-Cut
- Vleesmolen Browin
Nieuwste handleidingen voor Vleesmolen
14 November 2024
11 November 2024
5 November 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024