Hobart 4812 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hobart 4812 (48 pagina's) in de categorie Vleesmolen. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
INSTALLATION AND OPERATION MANUAL
MANUEL D'INSTALLATION ET D'UTILISATION
INSTALLATIONS UND BEDIENUNGSANLEITUNG
MODEL
4812
ML-136159
FORM 35114 (July 2008)
Page 1 - English
Page 17 - French
Page 33 - German
– 2 –
© Hobart 2008
ENGLISH / CONTENTS
4812 CE Mincer Section Page
Safety Information 1.0 3
Safety Guidelines 1.1 3
Warning Symbols 1.2 3
Liability 1.3 3
Foreword 2.0 4
General Information 3.0 4
Caring for Our Environment 4.0 4
Packaging Material 4.1 4
Disposal of Your Old Appliance 4.2 4
Mincer Dimensions 5.0 5
Table 1 Technical Information 6.0 6
Installation 7.0 7
Un-Packing 7.1 7
Location 7.2 7
Electrical Installation 7.3 7
Commissioning and Operating Instructions 8.0 8
Operator Training 8.1 8
Using for the First Time 8.2 8
Component Identi cation: 8.3 8
Assembly of Mincing End and Feed Pan 8.4 9
Operation 9.0 9
Controls 9.1 9
Mincing 9.2 9
Cleaning and Sanitizing 10.0 10
Maintenance 11.0 11
Fault Finding 12.0 12
Recommended Spares 13.0 13
Notes 14.0 14
Service Contact Numbers 15.0 15
– 3 –
1.0 SAFETY INFORMATION
The procedures and precautions contained in this manual are understood to apply to the
machinery only when it is used in the prescribed manner. If the machinery is used other than in
the recommended manner, the operator will be responsible for his/her own safety and for the
safety of the other persons who may be involved.
The information in this manual has been prepared to assist the operator to understand,
maintain, and operate the mincer. In order to prevent accidents, read, understand and follow
all the precautions and warnings contained in this manual before installation or operating for
the rst time. This manual must be studied to obtain a clear understanding of the mincer and its
capabilities.
1.1 SAFETY GUIDELINES
Do not hose or pressure clean this appliance. It is vital to adhere to the cleaning instructions
detailed in this manual.
Do not remove any covers or loosen any ttings whilst the machine is operating.
Ensure this manual is kept in an easily accessible place for future reference near the
mincer.
All operators must be trained in the safe operation of the mincer and its components.
Ensure the electrical supply has been isolated before attempting to service or move the
mincer.
Rotating machinery and electricity are potentially hazardous and may cause injury if
suf cient precautions are not taken prior to operating or servicing the machine.
Always have your miner and attachments regularly serviced; at least twice a year, depending
on frequency of use.
1.2 WARNING SYMBOLS
To identify the safety messages in this manual, the following symbols have been used.
The “Warning” symbol is found primarily where the corresponding information is
important for the safe use of the machinery.
The electrical hazard symbol is used when there are risks of an electrical nature.
Prior to servicing the machinery, always disconnect the power cable from the mains
supply.
1.3 LIABILITY
Installations and repairs which are not carried out by or the use of Authorized technicians
other than original spare parts, and any to the machine, technical alterations may affect the
warranty set out in the standard conditions of sale.


Product specificaties

Merk: Hobart
Categorie: Vleesmolen
Model: 4812

Heb je hulp nodig?

Als je hulp nodig hebt met Hobart 4812 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vleesmolen Hobart

Hobart

Hobart 4146 Handleiding

9 Augustus 2023
Hobart

Hobart MG2032 Handleiding

9 Augustus 2023
Hobart

Hobart 4246 Handleiding

9 Augustus 2023
Hobart

Hobart 4822 Handleiding

9 Augustus 2023
Hobart

Hobart 4732A Handleiding

9 Augustus 2023
Hobart

Hobart 4812 Handleiding

9 Augustus 2023
Hobart

Hobart 4732 Handleiding

9 Augustus 2023

Handleiding Vleesmolen

Nieuwste handleidingen voor Vleesmolen