Hobart HS6-1PS Handleiding
Hobart
Snijmachine
HS6-1PS
Lees hieronder de 📖 handleiding in het Nederlandse voor Hobart HS6-1PS (28 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
701 S. RIDGE AVENUE
TROY, OHIO 45373
937 332-3000
www.hobartcorp.com FORM 45270 Rev. D (May 2021)
PORTION SCALE SLICER
MODEL
HS6-1PS ML-141162
HS7-1PS ML-141166
– 2 –
© HOBART, 2019
TABLE OF CONTENTS
GENERAL ............................................................................................................................................. 3
Warranty Disclaimer 4 ........................................................................................................................
General Information 4 .........................................................................................................................
INSTALLATION .................................................................................................................................... 4
Unpacking 4 ........................................................................................................................................
Display Icons 5 ...................................................................................................................................
OPERATION ........................................................................................................................................ 7
Set Unit of Measure 7 .........................................................................................................................
30 Second Timeout .......................................................................................................................... 7
Zero Out Scale 7 ................................................................................................................................
Set Stacking Preference 8 ..................................................................................................................
Set Target Weight ............................................................................................................................ 8
SUPERVISOR ACCESS ..................................................................................................................... 9
Message Conîš¿guration .................................................................................................................... 9
Create/Delete Message 9 ...................................................................................................................
Speedkey Conîš¿guration ................................................................................................................ 10
Create/Delete Speedkey 10 ...............................................................................................................
SETUP UTILITY ..................................................................................................................................11
Calibrate Touchscreen ....................................................................................................................11
Time Edit 12 ........................................................................................................................................
Change Language 13 .........................................................................................................................
CLEANING ......................................................................................................................................... 14
Scale Platter 14 ..................................................................................................................................
Display and DISPLAY TUBE 14 .........................................................................................................
TROUBLESHOOTING ...................................................................................................................... 14
Service 14 ...........................................................................................................................................
– 3 –
Operation of
MODEL HS6-1PS & HS7-1PS Portion Scale Slicers
SAVE THESE INSTRUCTIONS
GENERAL
The Hobart Model HS6-1PS and HS7-1PS Portion Scale Slicers (Fig. 1) display the weight as the sliced
product falls to the platter.
This manual explains the platter scale and display features only. Refer to the current HS Series Slicer
Instruction Manual for detailed information about operating and cleaning the slicer.
The scale components of these slicers are extremely precise and sensitive. The unit MUST be
placed on a rigid surface that does not move or deect while the slicer is running. Failure to do so may
result in the scale not operating as intended.
Do not move or lift the slicer by the platter arm or display tube. Lift at the base of the slicer.
Failure to comply could result in weigher damage and void the warranty.
The scale display can tare to indicate net weight but is NOT LEGAL FOR TRADE.
Fig. 1
HS6-1PS HS7-1PS
DISPLAY DISPLAY
PLATTER
PLATTER
ARM
DISPLAY
TUBE
PLATTER
ARM
DISPLAY
TUBE
PLATTER
Product specificaties
| Merk: | Hobart |
| Categorie: | Snijmachine |
| Model: | HS6-1PS |
Heb je hulp nodig?
Als je hulp nodig hebt met Hobart HS6-1PS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Hobart
29 November 2023
29 November 2023
9 Augustus 2023
8 Augustus 2023
8 Augustus 2023
8 Augustus 2023
8 Augustus 2023
8 Augustus 2023
8 Augustus 2023
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Bomann
- Snijmachine Borner
- Snijmachine Brandson
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Kogan
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Perel
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Swan
- Snijmachine Team
- Snijmachine Thane
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Ozito
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Camry
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Khind
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Maruyama
- Snijmachine Royal Catering
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine Ovela
- Snijmachine CaterChef
- Snijmachine Weston
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Cigweld
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Wolfcraft
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
14 November 2024
14 November 2024
14 November 2024
14 November 2024
5 November 2024
2 November 2024
16 Oktober 2024
16 Oktober 2024
14 Oktober 2024
14 Oktober 2024