Gossen Metrawatt Driver Control Handleiding

Gossen Metrawatt Niet gecategoriseerd Driver Control

Lees hieronder de 📖 handleiding in het Nederlandse voor Gossen Metrawatt Driver Control (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
Operating Instructions
GMC-I Driver Control
Software for the Installation of Device Drivers
for Devices and Adapters of GOSSEN METRAWATT 3-349-614-03
9/6.21
2 Gossen Metrawatt GmbH
Tabel of Contents Page
1 Information on Application ............................................... 2
2 System Requirements ...................................................... 2
2.1 Hardware ......................................................................................2
2.2 Operating System ..........................................................................2
2.3 Supported Devices .........................................................................2
3 Installation ....................................................................... 3
3.1 Driver Installation on your PC ..........................................................3
3.2 Initial Hardware Startup ..................................................................4
4 Safety Messages during Driver Installation on Windows 7 ...5
5 Product Support ............................................................... 5
These operating instructions describe the program
GMC-I Driver Control as from version 1.21.
1 Information on Application
All of the steps necessary for setting up USB drivers for instru-
ments of Gossen Metrawatt GmbH, are described in this docu-
ment.
The system requirements are listed in the following chapter.
The installation of the device drivers is described under section 3
for Windows 7 and subsequent versions.
2 System Requirements
Prerequisites for you PC with regard to hardware and operating
system are listed in concrete terms in the following subsections.
2.1 Hardware
• Processor and RAM see minimum system requirements of the
respective operating system
• VGA monitor with a resolution of at least 1024 x 768 pixels
• Hard disk with at least 10 MB available memory capacity
• Mouse and keyboard
• One or more USB ports
2.2 Operating System
• Windows 7, 8 or 10
2.3 Supported Devices
GMC-I Driver Control as from version 1.21 supports the following
devices:
Adapters and Modules for Test Instruments and Controllers
IrDa-USB Converter for test instruments with a serial port
(e. g. for PROFITEST 0100SII / C, METRISO C and GEOHM C)
RS232-USB R2500/R2700
SECUSTORE
SECUTEST SI+
Testers
SECULIFE ST BASE(25)
SECULIFE ST PRO
SECUTEST BASE(10)
SECUTEST PRO
MINITEST 3P MASTER
MINITEST MASTER
MINITEST PRO
PROFITEST PRIME (AC)
PROFITEST MASTER (IQ)
SECULIFE SR
METRISO XTRA (G1000+)
Multimeter
METRAport 40 USB
USB-METRAHIT 2x
USB-METRAHIT X-TRA
Laboratory Power Supplies
SYSKON P500
SYSKON P800
SYSKON P1500
SYSKON P3000
SYSKON P4500
Install GMC-I Driver Control
Set up Device Drivers
(automatic during initial startup
after connecting the device with
the USB interface of the PC)
Connect the Test Instrument
Exchange Data
e. g. IZYTRONIQ
Gossen Metrawatt GmbH 3
3 Installation
GMC-I Driver Control software can be downloaded from Gossen
Metrawatt's website at:
www.gossenmetrawatt.com
 Products Software Software for Testers  
ï‚® ï‚® Utilities )Driver Control
The ZIP file can be unpacked in any desired directory. The setup
file then appears in the directory. Installation is started by double
clicking the setup file. A wizard guides you through the installation
procedure.
The installation routine is described in the following using Win-
dows 8 as an example.
3.1 Driver Installation on your PC
➭Accept and click the „Next“ button.
âž­First select the desired language and acknowledge by clicking
the „OK“ button.
➭Then click the „Next“ button.
âž­Read the agreement.
➭If you accept, click the „Next“ button.
➭Then click the „Next“ button.
➭Then click the „Next“ button.

Product specificaties

Merk: Gossen Metrawatt
Categorie: Niet gecategoriseerd
Model: Driver Control

Heb je hulp nodig?

Als je hulp nodig hebt met Gossen Metrawatt Driver Control stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Gossen Metrawatt

Gossen Metrawatt

Gossen Metrawatt SYSKON P1500 Handleiding

13 November 2024
Gossen Metrawatt

Gossen Metrawatt PROFITEST PRCD M512R Handleiding

6 November 2024
Gossen Metrawatt

Gossen Metrawatt METRALINE EVSE IT Z525M Handleiding

5 November 2024
Gossen Metrawatt

Gossen Metrawatt PROFITEST EMOBILITY Handleiding

5 November 2024
Gossen Metrawatt

Gossen Metrawatt GEOHM ERP-1 Z592S Handleiding

5 November 2024
Gossen Metrawatt

Gossen Metrawatt PROFITEST REMOTE Handleiding

5 November 2024
Gossen Metrawatt

Gossen Metrawatt CP30 Handleiding

8 April 2024
Gossen Metrawatt

Gossen Metrawatt PROFiSIM 1 Handleiding

19 Maart 2024
Gossen Metrawatt

Gossen Metrawatt SINEAX VQ604s Handleiding

11 Maart 2024
Gossen Metrawatt

Gossen Metrawatt Z821B Handleiding

11 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024