Gossen Metrawatt PROFITEST EMOBILITY Handleiding

Gossen Metrawatt Niet gecategoriseerd PROFITEST EMOBILITY

Lees hieronder de 📖 handleiding in het Nederlandse voor Gossen Metrawatt PROFITEST EMOBILITY (22 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/22

Operating Instructions

3-349-981-15

7/2.24

PROFITESTEMOBILITY

Adapter for Standards-Compliant Testing of Single and 3-Phase,

Mode 2 and 3 Charging Cables

2 | 22

Table of Contents Page Table of Contents Page

1 Safety Instructions......................................3

2 Application..................................................4

2.1 Intended Use / Use for Intended Purpose .......4

2.2 Use for Other than Intended Purpose .............5

2.3 Liability and Guarantee .................................5

3 Documentation............................................5

3.1 Information Concerning these Instructions .....5

3.2 Meanings of Symbols in the Operating

Instructions ..................................................5

4 The Instrument............................................6

4.1 Scope of Delivery .........................................6

4.2 Optional Accessories ....................................6

4.3 Symbols on the Instrument ...........................6

4.4 Connections Overview ..................................7

4.5 Operating Overview ......................................8

4.6 Relevant Standards ......................................8

4.7 Technical Data .............................................9

4.8 Characteristic Values ....................................9

5 Initial Startup ............................................10

5.1 Mains Connection ......................................10

5.2 Testing the LEDs ........................................10

5.3 Connecting the Mode 2/3 Charging Cable ....10

6 Fault Simulation........................................11

6.1 Mode 2 Charging Cable (Single-phase) .......11

6.2 Mode 2 (3-phase) Charging Cable ..............12

7 Measurements/Tests with Test

Instruments...............................................13

7.1 General Information ....................................13

7.2 Measurement of Protective Conductor

Resistance (RLO) ........................................13

7.3

Measuring Insulation Resistance (R ISO) ......... 13

7.4 Tripping Test with Nominal Residual Current

and Measurement of Time to Trip at Mode 2

Charging Cable

(not possible with SECUTEST ST PRO) .........14

7.5 Guided Test Sequences

(not possible with PROFITEST MXTRA and

PROFITEST MTECH+) .................................15

8 Protective Conductor Current Measurement

(IPE) at Mode 2 Charging Cable ................15

9 Measuring RC

(Testing of Resistance Coding)

(not possible with SECUTEST ST PRO) ..... 16

10 Storage and Transport ............................. 16

11 Maintenance ............................................ 17

11.1 Cleaning of Housing ................................... 17

11.2 Technical Safety Inspections

Testing per DGUV Regulation 3 ................... 17

11.3 Fuse Replacement ..................................... 18

12 Repair....................................................... 19

13 Contact, Support and Service .................. 20

14 CE Declaration.......................................... 20

15 Disposal and Environmental Protection ... 21

3 | 22

Safety Instructions

1 Safety Instructions

Read and follow these instructions carefully

and completely in order to ensure safe and

proper use.

Read the operating instructions for the

respective test instrument as well, in particu-

lar the sections concerning the R

PE, RISO

and time-to-trip measurements, as well as

the tripping test.

General

• Measurements/tests may only be per-

formed by a qualified electrician, or

under the supervision and direction of a

qualified electrician. The user must be

instructed by a qualified electrician con-

cerning performance and evaluation of

the tests/measurements.

• Observe and comply with all safety regu-

lations which are applicable for your

work environment.

• Wear suitable and appropriate personal

protective equipment (PPE) whenever

working with the instrument.

Handling

• The instruments and accessories of

Gossen Metrawatt GmbH are designed

such as to ensure optimum compatibility

with the Gossen Metrawatt GmbH prod-

ucts that are expressly provided for

them. Unless otherwise expressly con-

firmed in writing by Gossen Metrawatt

GmbH, they are not intended and suited

for use with other products.

• Use the instrument in undamaged condi-

tion only.

Inspect the instrument before use. Pay

particular attention to damage, inter-

rupted insulation or kinked cables.

Also test the LEDs: if the LEDs are

defective, voltage at the ICCB-IN1 sock-

ets is no longer indicated.

• If the instrument doesn’t function flaw-

lessly, permanently remove it from oper-

ation and secure it against inadvertent

use.

• If the instrument is damaged during use,

for example if it’s dropped, remove it

from operation permanently and secure

it against inadvertent use.

• If there are any signs of interior damage

to the instrument or accessories (e.g.

loose parts in the housing), permanently

remove the instrument/accessories from

operation and secure them against inad-

vertent use.

• Route cables in an orderly fashion, e.g.

the mains power cable. Loose, disor-

derly cables result in unnecessary dan-

ger of tripping and falling.

• The instrument may only be used for the

measurements/tests described in the

documentation for the instrument.

•

The instrument may only be connected to

electrical systems with a maximum of

230/

400 V

which comply with applicable

safety regulations (e.g. IEC 60346, VDE

0100) and are protected with a fuse or cir-

cuit breaker with a maximum rating of

16 A.

• The test adapter may only be used for

testing mode 2 and 3 charging cables.

• No power consuming devices may be

connected to any of the sockets.

• Measurements within electrical systems

are prohibited.

• Observe the manufacturer’s specifica-

tions for DUTs.

Operating Conditions

• Do not use the instrument and its acces-

sories after long periods of storage under

unfavorable conditions (e.g. humidity,

dust or extreme temperature).

• Do not use the instrument and its acces-

sories after extraordinary stressing due

to transport.

• The instrument must not be exposed to

direct sunlight.

• Only use the instrument and its accesso-

ries within the limits of the specified tech-

nical data and conditions (ambient con-

ditions, IP protection code, measuring

category etc.).

Product specificaties

Merk:	Gossen Metrawatt
Categorie:	Niet gecategoriseerd
Model:	PROFITEST EMOBILITY

Heb je hulp nodig?

Als je hulp nodig hebt met Gossen Metrawatt PROFITEST EMOBILITY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Gossen Metrawatt

Gossen Metrawatt SYSKON P1500 Handleiding

13 November 2024

Gossen Metrawatt PROFITEST PRCD M512R Handleiding

6 November 2024

Gossen Metrawatt METRALINE EVSE IT Z525M Handleiding

5 November 2024

Gossen Metrawatt PROFITEST EMOBILITY Handleiding

5 November 2024

Gossen Metrawatt GEOHM ERP-1 Z592S Handleiding

5 November 2024

Gossen Metrawatt PROFITEST REMOTE Handleiding

5 November 2024

Gossen Metrawatt CP30 Handleiding

8 April 2024

Gossen Metrawatt PROFiSIM 1 Handleiding

19 Maart 2024

Gossen Metrawatt SINEAX VQ604s Handleiding

11 Maart 2024

Gossen Metrawatt Z821B Handleiding

11 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Smeg GTA-6 Handleiding

21 November 2024

Smeg KIT6CX Handleiding

21 November 2024

Senal SCS-98 Handleiding

21 November 2024

Senal ASM-6 Handleiding

21 November 2024

Senal ASM-MNTKIT Handleiding

21 November 2024

Senal SMS-45 Handleiding

21 November 2024

Smeg KIT6PX Handleiding

21 November 2024

Senal SCI-3212MP Handleiding

21 November 2024

Matterport Pro2 3D Camera MC250 Handleiding

21 November 2024

Senal OLM-2S-P Handleiding

21 November 2024