G-Technology CID001 Handleiding

G-Technology Boormachine CID001

Lees hieronder de 📖 handleiding in het Nederlandse voor G-Technology CID001 (16 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

OPERATING MANUAL

Model number: CID001

Cordless Impact Driver

4615_Impact_driver_manual_aw.indd 1

4615_Impact_driver_manual_aw.indd 14615_Impact_driver_manual_aw.indd 1 28/10/2020 16:38

28/10/2020 16:38

28/10/2020 16:3828/10/2020 16:38

IMPORTANT SAFEGUARDS:

IMPORTANT: To avoid serious personal injury, do not attempt to use this

product until you read the manual thoroughly and understand it complete-

ly. Save this manual and review frequently for safe operation and instruct-

ing others who may use this tool. Keep this manual for the safety warnings,

precautions, operations, inspections and maintenance information. Store

this manual and the receipt in a safe and dry place for future reference.

WARNING: The warnings and precautions discussed in this manual cannot

cover all possible conditions and situations that may occur. Please be aware of the

potential hazards, and take all necessary precautions to avoid risk of injuries.

Work area:

• Keep the work area clean and well

lit. Cluttered benches and dark areas

increase the risk of accidents.

• Do not operate the tool in explosive

atmospheres, such as in the presence

of ﬂammable liquids, gases or dust. The

tool could create a spark which may

ignite ﬂammable liquids, gases or dust.

• Keep bystanders, children, and others

away while operating the tool. Distrac-

tions could result in improper use and

cause injury.

• Always keep proper footing and

balance. Proper footing and balance

enable better control of the tool in

unexpected situations.

• Do not use on a ladder or unstable

supports. Stable footing on a solid

surface enables better control of the tool

in unexpected situations.

Personal safety:

• Always wear eye protection. Operator

and others in the work area should

always wear ANSI-Z87 .1 approved

safety goggle with side shields. Eye

protection is used to guard against

ﬂying debris, which may cause severe

eye injury.

• Always hearing protection when using

the tool. Prolonged exposure to high

intensity noise may cause hearing loss.

• Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing, and gloves away from moving

parts. Loose clothes, jewellery, or long

hair can be caught in moving parts.

• Stay alert. Do not use tool while tired or

under the inﬂuence of drugs, alcohol,

or medication. A moment of inattention

while operating the tool may cause

serious injury.

• Avoid prolonged use. The tool’s

repetitive motion and vibration can

cause harm to your hands or arms. The

user can use gloves for extra cushion,

take frequent breaks and limit daily use

to prevent this issue.

• This tool vibrates with use. Continuous

operation can be harmful to your hands

and arms. Stop using the tool if you

feel tingling or pain. Resume work aer

recovery. Seek medical advice if serious

symptoms occur.

• Make sure there are no hidden electrical

cables, gas pipes, etc. while working

on the work piece. These hazards could

harm the user if damaged while using

this tool.

• Wash hands aer handling this product

or its power cord. They may contain

chemi cals known to the State of

California to cause cancer and birth

defects or other reproductive harm.

4615_Impact_driver_manual_aw.indd 2

4615_Impact_driver_manual_aw.indd 24615_Impact_driver_manual_aw.indd 2 28/10/2020 16:38

28/10/2020 16:38

28/10/2020 16:3828/10/2020 16:38

Electrical safety:

• The charger’s power plug must match

the outlet. Never modify the plug or try

to plug the tool into an outlet that does

not match the plug.

• Avoid contact with grounded elements

such as metal tables, pipes, ranges

or refrigerators. Contact with these

elements can put you at risk of electrical

shock.

• When operating the tool keep tool away

from wet conditions. Wet tools can

cause electrical shock.

• Always inspect electrical cord for

damage before and aer use. A

damaged cord can cause electrical

shock.

Tool use and care:

• Know this tool. Read this manual

carefully, learn its applications and

limitations, as well as the speciﬁc

potential hazards related to this tool.

• Always have a ﬁrm footing and grip on

the tool to counteract any force that may

be enacted during the operation of the

tool.

• Practice safe working practices and

ensure all relevant legal requirements

are being followed when using this tool.

• The tool should not be forced, use the

correct tool for your application. The

correct tool will do the job better and

safer at the rate for which the tool is

being used.

• Before adjusting, changing accessories,

or storing the tool disconnect the tool

from the battery. This will reduce the risk

of injury from the power tool.

• Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may aﬀect the tool’s

operation. If damaged, have the tool

serviced before using.

• Many accidents are caused by poorly

maintained tools. Maintain tool with

care. A properly maintained tool will

function more smoothly and prevent

binding, making it easier to use.

• Do not use the tool for anything other

than its intended use.

• Do not use the tool if the trigger does

not actuate properly. Any tool that

cannot be controlled with the trigger is

dangerous and must be repaired.

• Keep the tool and its handle dry, clean

and free of oil and grease. Always use a

clean cloth when cleaning. Never use

brake ﬂuids, gasoline, petroleum-based

products, or any strong solvents to clean

your tool.

• Never use gasoline or other ﬂammable

liquids to clean the tool. Never use the

tool in the presence of ﬂammable liquids

or gases. Vapors could ignite by a spark

and cause an explosion which will result

in death or serious injury.

• Do not use the tool as a hammer.

• Never press the trigger of the tool when

it is not intended to be used.

• Do not drop or throw the tool.

Dropping or throwing the tool can

result in damage that will make the tool

unusable or unsafe. If the tool has been

dropped or thrown, examine the tool

closely for bent, cracked or broken

parts. STOP and repair before using or

serious injury could occur.

Battery and charger use

and care:

• Only use batteries that are recommend-

ed for this tool by the manufacturer. Use

of any other battery may cause risk of

injury or ﬁre.

• When the battery is not in use, keep

it away from metal objects that could

connect one terminal to another. If the

terminals are connected the battery

could cause ﬁre or burns.

• Keep the battery free of abusive

situations, if a battery is damaged it can

eject battery liquid. If you encounter the

battery liquid ﬂush the contact area with

water. If your eye encounters the battery

4615_Impact_driver_manual_aw.indd 3

4615_Impact_driver_manual_aw.indd 34615_Impact_driver_manual_aw.indd 3 28/10/2020 16:38

28/10/2020 16:38

28/10/2020 16:3828/10/2020 16:38

Product specificaties

Merk:	G-Technology
Categorie:	Boormachine
Model:	CID001

Heb je hulp nodig?

Als je hulp nodig hebt met G-Technology CID001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Boormachine G-Technology

G-Technology CCD001 Handleiding

24 Januari 2024

G-Technology CID001 Handleiding

24 Januari 2024

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Festo DGSC-6-10-P-P Handleiding

21 November 2024

Cecotec CecoRaptor Handleiding

19 November 2024

Bavaria By Einhell BAS 18 S-2 Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSM 1000 Handleiding

19 November 2024

Bavaria By Einhell BAS 24 S Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSM 500 Handleiding

19 November 2024

Proviel HTM 1305/1 Handleiding

19 November 2024

Proviel HPAS 18 AK Handleiding

19 November 2024

Bavaria By Einhell BAS 24/1 Handleiding

19 November 2024

Bavaria By Einhell BAS 24 S-2A Handleiding

19 November 2024