Fredenstein F607 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fredenstein F607 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
F607
Monitor Controller
Operating Manual
Fredenstein F607 Monitor Controller
The F607 is a high performance professional monitor controller, offering an effective monitor
volume control for project and home studios out of a Fredenstein Bento rack. The F607 features a
second unbalanced stereo input as well as mute, dim, mono and balance control functions.
If used in a Bento D rack with, all parameters can be monitored on the LCD display.
As all Fredenstein products, the F607 is designed by a German-American team and manufactured in
Taiwan.
Overview:
Rotary Controls:
Volume : Volume control
Switches:
AUX : Selects unbalanced AUX Input
MONO : Mono Mode
MUTE : Speakers muting (speakers off)
DIM : Sets reduced Volume (programmable)
CAL Main : Calibration modes for MAIN (balanced) input
CAL AUX : Calibration modes for AUX (unbalanced) input
Connector:
AUX INPUT : Unbalanced Stereo AUX input (TRS)
Fredenstein F607 Manual V1.1 July 18, 2014 Page 1
Fredenstein F607 Monitor Controller
Installation:
Please power down your rack or box first before inserting the F607. The power requirements are
+/-16V, +/-100mA. Please connect the left channel of your speaker amp or your left active monitor
to the MAIN out XLR and the right channel to the AUX out XLR located on the backpanel of your
Fredenstein Bento rack. Please be aware, the F607 will not work in any third party enclosures.
In case you are using a Fredenstein Bento D rack, you can calibrate the system, please apply your
reference level to the F607 and set the volume to 78 dBA on the Bento D display. Then adjust the
sensitivity of your speaker amp(s) or active monitors to a sound pressure level of 78 dBA at your
listening position with the help of a sound pressure meter.
Volume:
Volume control 20 dBA to 115 dbA (when calibrated)
AUX:
Selects the AUX TRS unbalanced Stereo input located on the front panel, if not activated the MAIN
XLR balanced inputs of the Fredenstein Bento rack are selected, the left channels is the XLR Main
input, the right channel the XLR AUX input on the rear panel of the Bento rack.
Mono:
Mono mode, the signals for left and right channels are added and fed two both speakers.
Mute:
Mute control, if activated, no signal is delivered to the speakers.
DIM:
The DIM control selects a lower volume, default is -20dB, but the user can set the DIM depth to
any value between -40 dB and 0 dB
CAL MAIN:
Calibration on main input balance, if both CAL MAIN and DIM active, calibration of DIM
DEPTH, in both cases the parameters are altered by using the volume control.
If the CAL MAIN button is pressed for about 3 seconds the function turns off and all calibration
parameters are set to the default values.
CAL AUX:
Calibration on AUX input balance, if both CAL AUX and DIM active, calibration of AUX volume
to ensure the same volume of MAIN inputs and AUX inputs. The gain range is – 20dB to + 20 dB
in both cases the parameters are altered by using the volume control.
If the AUX MAIN button is pressed for about 3 seconds the function turns off and all AUX
parameters, AUX BALANCE and AUX TRIM, are set to the default values.
All parameters are internally stored in a non-volatile memory and are automatically recalled at
power-up. The F607 is powered by a 32bit ARM CPU.
Fredenstein F607 Manual V1.1 July 18, 2014 Page 2


Product specificaties

Merk: Fredenstein
Categorie: Niet gecategoriseerd
Model: F607

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein F607 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Fredenstein

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd