First Alert CO600 Handleiding

First Alert Rookmelder CO600

Lees hieronder de 📖 handleiding in het Nederlandse voor First Alert CO600 (6 pagina's) in de categorie Rookmelder. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

USER’S MANUAL

120V PLUG-IN CARBON MONOXIDE ALARM

WITH SILENCE FEATURE

Model

CO600

Printed in Mexico M08-0152-002 07/07 S

I RTAN MPO T!

PLE SE CAR FULA READ E LY D SA .AN VE

This user’s manual contains important information about your Carbon

Monoxide (CO) Alarm’s operation. If you are installing this CO Alarm

for use by others, you must leave this manual—or a copy of it—with

the end user.

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Basic Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

How Your CO Alarm Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Understanding Your CO Alarm . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Where to Install CO Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Where CO Alarms Should NOT Be Installed . . . . . . . . . . . . . . . .2

How to Install Your CO Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . .3

If Your CO Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

If the Alarm Signal Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Testing and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

What You Need To Know About CO . . . . . . . . . . . . . . . . . . . . . . . . . .4

What is CO? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Symptoms of CO Poisoning . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Finding the Source of CO After an Alarm . . . . . . . . . . . . . . . . . .4

Potential Sources Of CO In The Home . . . . . . . . . . . . . . . . . . . .4

How Can I Protect My Family? . . . . . . . . . . . . . . . . . . . . . . . . . .4

Regulatory Information for CO Alarms . . . . . . . . . . . . . . . . . . . . . . . 5

General Limitations Of CO Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3901 Liberty Street Road, Aurora, IL 60504-8122

Consumer Affairs: (800) 323-9005 www.firstalert.com •

INTRODUCTION

BASIC SAFETY INFORMATION

•Dangers, Warnings, and Cautions alert you to important

operating instructions or to potentially hazardous situations.

Pay special attention to these items.

•THIS IS NOT A SMOKE ALARM! This CO Alarm is designed to

detect carbon monoxide from ANY source of combustion. It is

NOT designed to detect smoke, fire, or any other gas.

•This CO Alarm is approved for use in single-family residences.

•This CO Alarm will only indicate the presence of carbon

monoxide gas at the sensor. Carbon monoxide gas may be

present in other areas.

•The Silence Feature is for your convenience only and will not

correct a CO problem. Always check your home for a potential

problem after any alarm. Failure to do so can result in injury or

death.

•This CO Alarm should receive continuous 120VAC, 60 Hz, pure

sine wave electrical power. Do not use in an extension cord or

outlet controlled by a dimmer or switch.

•NEVER ignore your Carbon Monoxide Alarm if it alarms. Refer

to “If Your CO Alarm Sounds” for more information. Failure to

do so can result in injury or death.

•Test the CO Alarm once a week. If the CO Alarm ever fails to

test correctly, have it replaced immediately! If the CO Alarm is

not working properly, it cannot alert you to a problem.

•This oduct ntende for use pr is i d in ord y l o ofinar in ordo ocati ns

fam ly vin units. It is not esigned measu evei li g d to re CO l ls in

compliance with Occupational Safety and Health Administratio n

(OSHA) comme cial or ndustr al standa ds. Ind vi ua r i i r i d ls with

me ical ns that ma make them mo sens ve tod con tdi io y re iti

carbon monoxide may consider using warning devices which

provide audible and visual signals for carbon monoxide con-

centrations under 30 pm. For ad iti nal informat carbo p d o ion on n

monoxide and your medical condition contact your physician .

HOW YOUR CO ALARM WORKS

GENERAL INFORMATION

Leave your CO Alarm plugged in year-round. CO problems can

occur any time during the year, and this Alarm can only alert you if

it is plugged in and receiving power.

When fully powered, the unit samples the air and takes a new reading

about every second. A microchip inside the unit stores each reading,

and remembers the levels of CO it has been exposed to over time.

The Alarm sounds when it has been exposed to a “critical” level of CO

(measured in parts per million or “ppm”) within a specified time (meas-

ured in minutes). This CO Alarm features a permanently installed sensor,

an indicator light, and an 85 dB alarm horn. It also has a Silence

Feature to temporarily quiet the alarm horn.

MALFUNCTION WARNING

This unit performs daily self-diagnostic tests. If the Alarm malfunctions,

it should be replaced immediately.

THE COVER OF YOUR CO ALARM

1 Test/Silence Button 2 POWER/ALARM Light (Red)

3 (Behind Cover) Alarm Horn: 85 dB audible alarm

for test, alarm, and unit malfunction warning

120V AC ~,

60 Hz, 0.09A

CONFORMS

TO UL 2034

INSTALLATION

WHERE TO INSTALL CO ALARMS

The National Fire Protection Association (NFPA) recommends that a CO

Alarm should be centrally located outside of each separate sleeping

area in the immediate vicinity of the bedrooms. For added protection,

install additional CO Alarms in each separate bedroom, and on every

level of your home.

If your bedroom hallway is longer than 40 feet (12 meters), install a CO

Alarm at BOTH ends of the hallway.

In a Single-level Home:

•Install at least one CO Alarm near or within each separate sleeping

area.

•For added protection, install an additional CO Alarm at least 20 feet

(6 meters) away from the furnace or fuel burning heat source.

In a Multi-level Home:

•Install at least one CO Alarm near or within each separate sleeping

area.

•For added protection, install at least one CO Alarm on each level of

the home.

•For added protection, install an additional CO Alarm at least 20 feet

(6 meters) away from the furnace or fuel burning heat source.

This unit should receive continuous electrical power. Choose an

outlet where it cannot be accidentally unplugged or switched off by

children. Keep small children away from the unit. Teach them not to

play with it or unplug it. Explain what the alarms mean.

WHERE CO ALARMS SHOULD NOT BE

INSTALLED

DO NOT LOCATE THIS CO ALARM:

•In garages, kitchens, furnace rooms, or in any extremely dusty,

dirty or greasy areas.

•Closer than 15 feet (4.6 meters) from a furnace or other fuel

burning heat source, or fuel burning appliances like a water heater.

•Within 5 feet (1.5 meters) of any cooking appliance.

•In extremely humid areas. This Alarm should be at least 10 feet (3

meters) from a bath or shower, sauna, humidifier, vaporizer, dish-

washer, laundry room, utility room or other source of high humidity.

•In areas where temperature is colder than 40˚ F (4˚ C) or hotter

than 100˚ F (38˚ C). These areas include non-airconditioned crawl

spaces, unfinished attics, uninsulated or poorly insulated ceilings,

porches, and garages.

•In turbulent air, like near ceiling fans, heat vents, air conditioners,

fresh air returns, or open windows. Blowing air may prevent CO

from reaching the sensors.

•In direct sunlight.

•In outlets covered by curtains or other obstruction.

•This CO Alarm is designed for use inside a single-family home

or apartment. It is not meant to be used in common lobbies,

hallways, or basements of multi-family buildings unless work-

ing CO Alarms are also installed in each family living unit.

CO Alarms in common areas may not be heard from inside

individual family living units.

•This CO Alarm alone is not a suitable substitute for complete

detection systems in places which house many people, like

hotels or dormitories, unless a CO Alarm is also placed in each

unit.

•DO NOT use this CO Alarm in warehouses, industrial or com-

mercial buildings, special-purpose non-residential buildings, or

airplanes. This CO Alarm is specifically designed for residential

use and ma de ade uate tect on, y not provi q pro i in non-res entid ial

applications.

UNDERSTANDING YOUR CO ALARM

WHAT YOU S AND HEAR D NG I TAEE URI NS LLATION

SUGGESTED AREAS FOR INSTALLING ADDITIONAL CO ALARMS

BEDROOMBEDROOM

HALL

LIVING ROOM

KITCHEN

BASEMENT

BEDROOM

REQUIRED TO MEET NFPA RECOMMENDATIONS

WHEN YOU FIRST PLUG-IN THE CO ALARM:

HORN: Silent

POWER/ALARM LIGHT: Shines continuously

UNDER NORMAL CONDITIONS (AC POWER):

HORN: Silent

POWER/ALARM LIGHT: Shines continuously

WHEN YOU TEST THE CO ALARM:

HORN: Sounds loudly - 4 beeps, pause, 4 beeps, pause

POWER/ALARM LIGHT: Flashes rapidly

WHAT YOU SEE AND HEAR UNDER DIFFERENT CONDITIONS:

WHEN THE ELECTRICITY COMES BACK ON AFTER A POWER

FAILURE:

HORN: Silent

POWER/ALARM LIGHT: Shines continuously.

IF LAR THE ACO M IS NOT OPERATING ERLY A C ONPROP (M LFUN TI

SIGNAL):

HORN: Three rapid chirps every minute

POWER/ALARM LIGHT: Flashes three times in sync with the horn.

WHAT YOU SEE AND HEAR IF CO IS DETECTED:

ALARM LEVELS OF CO ARE DETECTED:

HORN: Sounds loudly - 4 beeps, pause, 4 beeps, pause.

This sequence repeats for as long as the unit is in alarm.

POWER/ALARM LIGHT: Flashes rapidly

IF YOU SILENCE THE ALARM:

HORN: Silent for about 4 minutes

POWER/ALARM LIGHT: Flashes rapidly

Note: After 4 minutes, if CO levels drop below alarm levels, the unit

will remain silent and return to normal operation. If CO presence

still indicates a potentially dangerous situation, the horn will sound

again.

IF THE CO LEVELS RETURN TO NORMAL:

HORN: Silent

POWER/ALARM LIGHT: Shines continuously

HOW TO INSTALL YOUR CO ALARM

Read “Where To Install Your CO Alarm” before starting.

Before you start installation, find the pair of self-adhesive labels

included with this CO Alarm. On each label write in the phone number

of your emergency responder (like 911) and a qualified appliance tech-

nician. Place one label near the CO Alarm, and the other label in the

“fresh air” location you plan to go if the alarm sounds.

1. Plug the unit into a standard

UNSWITCHED 120V AC outlet.

The unit should be located

where it can wake you if it

alarms at night.

2. Make sure the POWER/ALARM light

shines continuously when you plug it.

3. Test by pressing the Test/Silence button firmly until the unit sounds:

four loud beeps, pause, 4 beeps. During testing, the POWER/

ALARM light will flash rapidly. This is normal.

IF YOUR CO ALARM SOUNDS

Actuation of your CO Alarm indicates the presence of carbon

monoxide (CO) which can kill you. In other words, when your CO

Alarm sounds, you must not ignore it!

IF THE ALARM SIGNAL SOUNDS:

1. Operate the Test/Silence button.

2. Call your emergency services, fire department or 911. Write down

the number of your local emergency service here:

_____________________________________________________________

3. Immediately move to fresh air—outdoors or by an open door or

window. Do a head count to check that all persons are accounted

for. Do r n r the premises, or ve away from n ornot e-e te mo the ope do

or window until the emergency services responder has arrived, the

premises have been aired out, and your CO Alarm remains in its

normal condition.

4. After following steps 1-3, if your CO Alarm reactivates within a

24-hour period, repeat steps 1-3 and call a qualified appliance

technician to investigate for sources of CO from fuel-burning

equipment and appliances, and inspect for proper operation of this

eq ip t. If oblems ide tified ing is pectiou men pr are n dur th ins n have the

eq ip er iced ediatelu ment s v imm y. a m s p ntNote ny co bu tion equi me

not inspected by the technician, and consult the manufacturers’

instructions, or contact the manufacturers directly, for more

information about CO safety and this equipment. Make sure that

m v s are , and have n , n r ng in an hedotor ehicle not ot bee ope ati attac

garage or adjacent to the residence. Write down the number of a

qualified appliance technician here:

_____________________________________________________________

Alarms have various limitations. See "General Limitations of CO

Alarms" for details.

USING THE SILENCE FEATURE

The Silence Featu re rris for your convenience only and will not co ect

a CO problem. Always check your home for a potential problem

after any alarm. Failure to do so can result in injury or death.

NEVER unplug your CO Alarm to silence the horn. Use the silence

feature. Unplugging the CO Alarm removes your protection! See “If

Your CO Alarm Sounds” for details on responding to an alarm.

When CO reaches alarm levels the alarm will sound— repeating horn

patte n: beeps, pause, beeps, etc. ess and hold ther 4 a 4 Pr Test/Silence

button until the horn is silent. The initial Silence cycle will last approxi-

mately 4 minutes.

NOTE: After initial 4-minute Silence cycle, the CO Alarm re-evaluates

present CO levels and responds accordingly. If CO levels remain poten-

tially dangerous—or start rising higher—the horn will start sounding

again.

While the detector is silenced:

“ALARM-MOVE TO FRESH AIR”

If you hear the alarm horn and the red light is flashing,

move everyone to a source of fresh air.

DO NOT unplug the CO Alarm!

TESTING AND MAINTENANCE

WEEKLY TESTING

Press the Test/Silence button on the Alarm cover until alarm sounds.

During testing, you will hear a loud alarm sequence – 4 beeps, pause,

4 beeps, pause.

The alarm sequence should last 5-6 seconds. If it does not alarm, make

sure the unit is fully plugged into an unswitched outlet. If the unit still

does not alarm, replace it immediately.

•If the Alarm ever fails to test properly, replace it immediately.

Products under warranty may be returned to the manufacturer

for replacement. See “Limited Warranty” at the end of this

manual.

•DO NOT stand close to the Alarm when the horn is sounding.

Exposure at close range may be harmful to your hearing. When

testing, step away when horn starts sounding.

•NEVER use vehicle exhaust! Exhaust may cause permanent

damage and voids your warranty.

REGULAR MAINTENANCE

To keep the CO Alarm working properly:

•Test it every week as described in “Weekly Testing.”

•Vacuum the CO Alarm cover at least once a month, using the soft

brush attachment. Never use water, cleaners, or solvents, since

they may damage the unit. Test the Alarm again after vacuuming.

DO NOT spray cleaning chemicals or insect sprays directly on or

near the CO Alarm. DO NOT paint over the CO Alarm. Doing so

may cause permanent damage.

•Household cleaners, aerosol chemicals and other contaminants

can affect the sensor. When using any of these materials near the

CO Alarm, make sure the room is well ventilated.

•If your home is being fumigated, unplug the unit temporarily and

put it where it will not be exposed to chemicals or fumes. When

fumigation is complete and all traces of fumes clear, plug the unit

back in and retest it.

If the CO Alarm...

Is silent for only 4 minutes,

then starts sounding loudly—

4 beeps, pause,

4 beeps, pause

This means...

CO levels are still potentially

dangerous.

If the CO Alarm...

Remains silent after you

pressed the Test/Silence

button

This means...

CO levels are dropping.

AC Plug

Product specificaties

Merk:	First Alert
Categorie:	Rookmelder
Model:	CO600

Heb je hulp nodig?

Als je hulp nodig hebt met First Alert CO600 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Rookmelder First Alert

First Alert SMCO210 Handleiding

24 Juni 2024

First Alert SMCO210V Handleiding

24 Juni 2024

First Alert SMCO100V-AC Handleiding

24 Juni 2024

First Alert SMICO100-AC Handleiding

24 Juni 2024

First Alert SA320 Handleiding

9 April 2024

First Alert P910 Handleiding

31 Augustus 2023

First Alert 7010BSL Handleiding

31 Augustus 2023

First Alert SCO5 Handleiding

31 Augustus 2023

First Alert P900E Handleiding

31 Augustus 2023

First Alert SC07 Handleiding

31 Augustus 2023

Handleiding Rookmelder

Nieuwste handleidingen voor Rookmelder

Cordes CC-4100 Handleiding

18 November 2024

Cordes CC-3000 Handleiding

18 November 2024

Cordes CC-500 Handleiding

18 November 2024

Nexa KD-134A Handleiding

18 November 2024

Gloria R-5 Handleiding

16 November 2024

Kidde 29HD Handleiding

16 November 2024

Ei Electronics Ei650iW Handleiding

15 November 2024

FireAngel W2-Module Handleiding

15 November 2024

FireAngel ST-630-DE Handleiding

15 November 2024

Kidde 3SFWR Handleiding

24 September 2024