First Alert 9120B Handleiding

First Alert Rookmelder 9120B

Lees hieronder de 📖 handleiding in het Nederlandse voor First Alert 9120B (7 pagina's) in de categorie Rookmelder. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Fire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Before You Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

How To Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Optional Locking Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Understanding the Indicator Lights

and Alarm Horn Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

If This Smoke Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

What To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

“Latching Alarm” Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

If You Suspect a Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . . . . . . .6

Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . .6-7

About Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Limitations of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

3901 Liberty Street Road, Aurora, IL 60504-8122

Consumer Affairs: (800) 323-9005

www.brkelectronics.com • www.firstalert.com

INTRODUCTION

Thank you for choosing BRK Brands, Inc. for your Smoke Alarm needs.

You have purchased a state-of-the-art Smoke Alarm designed to provide

you with early warning of a fire.

Key features include:

Smart Technology designed to help reduce unwanted or nuisance alarms.

Single Button Test/Silence eliminates confusion. Depending on what

mode the alarm is in, pushing the button provides different functions such

as testing the alarm, silencing the alarm, re-testing the alarm when in

silence and clearing the Latching feature.

Latching Alarm Indicator easily identifies initiating alarm even after the

alarm condition has subsided.

Perfect Mount System includes a gasketless base for easy installation and

a new mounting bracket that keeps the alarm secure over a wide rotation

range to allow for perfect alignment.

Dust Cover is included to keep the alarm clean during construction.

Easy Installation/Maintenance features include a large opening in the

mounting bracket for easy access to wiring. A battery pull tab keeps the

battery fresh until the home is occupied. A Side Load Battery Drawer allows

for easy battery replacement without removing the alarm from the ceiling or

wall (Model 9120B only).

Improved UV Resistance keeps the alarm from discoloring over time.

FIRE SAFETY TIPS

Follow safety rules and prevent hazardous situations: 1) Use smoking

materials properly. Never smoke in bed. 2) Keep matches or lighters away from

children; 3) Store flammable materials in proper containers;

4) Keep electrical appliances in good condition and don’t overload electrical

circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys grease- and

debris-free; 6) Never leave anything cooking on the stove unattended;

7) Keep portable heaters and open flames, like candles, away from flammable

materials; 8) Don’t let rubbish accumulate.

Keep alarms clean, and test them weekly. Replace alarms immediately if they

are not working properly. Smoke Alarms that do not work cannot alert you to

a fire. Keep at least one working fire extinguisher on every floor, and an addi-

tional one in the kitchen. Have fire escape ladders or other reliable means of

escape from an upper floor in case stairs are blocked.

BEFORE YOU INSTALL THIS SMOKE ALARM

IMPORTANT! Read “Recommended Locations for Smoke Alarms” and

“Locations to Avoid for Smoke Alarms” before beginning. This unit monitors

the air, and when smoke reaches its sensing chamber, it alarms. It can give

you more time to escape before fire spreads. This unit can ONLY give an

early warning of developing fires if it is installed, maintained and located

where smoke can reach it, and where all residents can hear it, as described

in this manual. This unit will not sense gas, heat, or flame. It cannot prevent

or extinguish fires.

Understand The Different Type of Smoke Alarms

Battery powered or electrical? Different Smoke Alarms provide

different types of protection. See “About Smoke Alarms” for details.

Know Where To Install Your Smoke Alarms

Fire Safety Professionals recommend at least one Smoke Alarm on every

level of your home, in every bedroom, and in every bedroom hallway or

separate sleeping area. See “Recommended Locations For Smoke Alarms”

and “Locations To Avoid For Smoke Alarms” for details.

Know What Smoke Alarms Can and Can’t Do

A Smoke Alarm can help alert you to fire, giving you precious time to

escape. It can only sound an alarm once smoke reaches the sensor. See

“Limitations of Smoke Alarms” for details.

Check Your Local Building Codes

This Smoke Alarm is designed to be used in a typical single-family home.

It alone will not meet requirements for boarding houses, apartment buildings,

hotels or motels. See “Special Compliance Considerations” for details.

USER’S MANUAL

Smoke Alarms

AC Powered Ionization Smoke

Alarm with Silence and

Latching Features

Model 9120

Input: 120V AC ~, 60 Hz, 0.04A

AC Powered Ionization Smoke

Alarm with Battery Back-up,

Silence and Latching Features

Model 9120B

Input: 120V AC ~, 60 Hz, 0.04A

IMPORTANT! PLEASE READ CAREFULLY AND SAVE

This user’s manual contains important information about your Smoke Alarm’s

operation. If you are installing the Smoke Alarm for use by others, you must

leave this manual — or a copy of it — with the end user.

Models 9120

9120B

Printed in Mexico

M08-0134-003 K1 04/07

All First Alert®and BRK®Smoke Alarms conform to regulatory

requirements, including UL217 and are designed to detect particles of

combustion. Smoke particles of varying number and size are produced

in all fires.

Ionization technology is generally more sensitive than photoelectric

technology at detecting small particles, which tend to be produced

in greater amounts by flaming fires, which consume combustible

materials rapidly and spread quickly. Sources of these fires may include

paper burning in a wastebasket, or a grease fire in the kitchen.

Photoelectric technology is generally more sensitive than ionization

technology at detecting large particles, which tend to be produced in

greater amounts by smoldering fires, which may smolder for hours

before bursting into flame. Sources of these fires may include cigarettes

burning in couches or bedding.

For maximum protection, use both types of Smoke Alarms on each level

and in every bedroom of your home.

The Mounting Bracket:

To remove the mounting bracket from the Smoke

Alarm base, hold the Smoke Alarm base firmly and

twist the mounting bracket counterclockwise.

The mounting bracket installs onto the junction box.

It has a variety of screw slots to fit most boxes.

The Power Connector:

The power connector plugs into a power input block on

the Smoke Alarm. It supplies the unit with AC power.

• The black wire is “hot.”

• The white wire is neutral.

• The orange wire is used for interconnect.

If you need to remove the power connector, insert a

flat screwdriver blade between the power connector

and the security tab inside the power input block.

Gently pry back the tab and pull the connector free.

The Parts of This Unit

1 Mounting Bracket

2 Mounting Slots

3 Locking Pins (break out of bracket)

4 Hot (Black) AC Wire

5 Neutral (White) AC Wire

6 Interconnect (Orange) Wire

7 Latch to Open Battery Compartment

8 Swing-Out Battery Compartment

9 Quick-Connect Power Connector

HOW TO INSTALL THIS SMOKE ALARM

THE PARTS OF THIS SMOKE ALARM

This Smoke Alarm is designed to be mounted on any standard wiring junction box to a 4-inch (10 cm) size, on either the ceiling or wall. Read “Recommended

Locations For Smoke Alarms” and “Locations to Avoid For Smoke Alarms” before you begin installation.

Tools you will need: • Needle-nose pliers or utility knife Standard Flathead screwdriver.•

Make sure the Alarm is not receiving excessively noisy power. Examples of noisy power could be major appliances on the same circuit, power from a

generator or solar power, light dimmer on the same circuit or mounted near fluorescent lighting. Excessively noisy power may cause damage to your

Alarm.

ELECTRICAL SHOCK HAZARD. Turn off the power to the area where the

Smoke Alarm is installed before removing it from the mounting bracket.

Failure to turn off the power first may result in serious electrical shock,

injury or death.

•

This unit will not alert hearing impaired residents. It is recommended

that you install special units which use devices like flashing strobe

lights to alert hearing impaired residents.

•

Installation of this unit must conform to the electrical codes in your

area; Articles 210, 760 of NFPA 70 (NEC), NFPA 72, NFPA 101; ICC;

SBC (SBCCI); UBC (ICBO); NBC (BOCA); OTFDC (CABO), and any

other local or building codes that may apply. Wiring and installation

must be performed by a licensed electrician. Failure to follow these

guidelines may result in injury or property damage.

• This unit must be powered by a 24-hour, 120V AC pure sine wave

60 Hz circuit.

Be sure the circuit cannot be turned off by a switch,

dimmer, or ground fault circuit interrupter. Failure to connect this unit

to a 24-hour circuit may prevent it from providing constant protection.

Unit may be connected to an arc fault circuit interrupter.

•

This Smoke Alarm must have AC or battery power to operate.

If the AC power fails, battery back-up will allow the alarm to sound

for at least 4 minutes. If AC power fails and the battery is weak,

protection should last for up to 7 days. If AC power fails and the

battery is dead or missing, the alarm cannot operate.

•

Never disconnect the power from an AC powered unit to stop an

unwanted alarm. Doing so will disable the unit and remove your

protection. In the case of a true unwanted alarm open a window or

fan the smoke away from the unit. The alarm will reset automatically

when it returns to normal operation. Never remove the batteries from

a battery operated unit to stop an unwanted alarm (caused by cooking

smoke, etc.). Instead open a window or fan the smoke away from the

unit. The alarm will reset automatically.

•

Connect this unit ONLY to other compatible units. See “How To

Install This Smoke Alarm” for details. Do not connect it to any other

type of alarm or auxiliary device. Connecting anything else to this unit

may damage it or prevent it from operating properly.

• y comparThe batter tment resists closing unless a battery is

installed. This warns you the unit will not operate under DC power

without a battery.

• Do not paint over the unit. Paint may clog the openings to the

sensing chamber and prevent the unit from operating properly.

BEFORE YOU INSTALL THIS SMOKE ALARM, Continued

The basic installation of this Smoke Alarm is similar whether you want

to install one Smoke Alarm, or interconnect more than one Smoke Alarm.

If you are interconnecting more than one Smoke Alarm, you MUST read

“Special Requirements For Interconnected Smoke Alarms” below before

you begin installation.

ELECTRICAL SHOCK HAZARD. Turn off power to the area where you

will install this unit at the circuit breaker or fuse box before beginning

installation. Failure to turn off the power before installation may result

in serious electrical shock, injury or death.

1. Using wire nuts, connect the power connector to the household wiring.

Improper wiring of the power connector or the wiring leading to the

power connector will cause damage to the Alarm and may lead to a

non-functioning Alarm.

2. Remove the mounting bracket from the base, and attach it to the

junction box.

3. Plug the power connector into the back of the Smoke Alarm.

Position the base of the Smoke Alarm over the mounting bracket and

turn. The Alarm will remain secure over a wide rotation range to allow for

perfect alignment. When wall mounting, this will allow fine-tuning on the

positioning to compensate for misaligned wall studs and to keep the

wording level. The Alarm can be positioned over the bracket every 120°.

Rotate the Alarm until aligned properly.

5. Check all connections.

ELECTRICAL SHOCK HAZARD. Do not restore power until all Smoke

Alarms are completely installed. Restoring power before installation is

complete may result in serious electrical shock, injury or death.

6. Make sure the Smoke Alarm is receiving AC power. Under normal

operation, the Green power indicator light will shine continuously.

7. If the Green power indicator light does not light, TURN OFF POWER TO

THE JUNCTION BOX and recheck all connections. If all connections

are correct and the Green power indicator still does not light when you

restore the power, the unit should be replaced immediately.

8. Single Station Alarms: Test each Smoke Alarm. Press and hold the

Test/Silence button until the unit alarms.

Interconnected Alarms: Press and hold the Test/Silence button until

the unit alarms. All interconnected Alarms should sound. The other

Alarms sounding only tests the interconnect signal between Alarms.

It does not test each Alarm’s operation. You must test each Alarm

individually to check if the Alarm is functioning properly.

If any unit in the series does not alarm, TURN OFF POWER and r

echeck

connections. If it does not alarm when you restore power, replace it

immediately.

SPECIAL REQUIREMENTS FOR INTERCONNECTED SMOKE ALARMS

• Failure to meet any of the above requirements could damage the

units and cause them to malfunction, removing your protection.

• AC and AC/DC Smoke Alarms can be interconnected. Under AC

power, all units will alarm when one senses smoke. When power is

interrupted, only the AC/DC units in the series will continue to send

and receive signals. AC powered Smoke Alarms will not operate.

Interconnected units can provide earlier warning of fire than stand-alone units,

especially if a fire starts in a remote area of the dwelling. If any unit in the

series senses smoke, all units will alarm. To determine which Smoke Alarm

initiated an alarm, see table:

During an Alarm:

On Initiating Alarm(s) Red LED(s) flashes (flash) rapidly

On All Other Alarms Red LED is Off

After an Alarm (Latching):

On Initiating Alarm(s) Green LED(s) On for 2 seconds/Off for 2 seconds

On All Other Alarms een LED(s) On, Red LED(s) is OfGr f

Compatible Interconnected Units

Interconnect units within a single family residence only. Otherwise all house-

holds will experience unwanted alarms when you test any unit in the series.

Interconnected units will only work if they are wired to compatible units and

all requirements are met. This unit is designed to be compatible with:

First Alert®Smoke Alarm Models SA4120, SA4121B, SA100B and BRK

Electronics®Smoke Alarm Models 9120, 9120B, SC6120B, SC9120B, 7010,

7010B, 100S, 4120, 4120B, 4120SB, RM3 (Relay Module); BRK Electronics

CO Alarm Models CO5120BN, CO5120PDBN; BRK Electronics

®Heat Alarm

Models HD6135F and HD6135FB.

Interconnected units must meet ALL of the following requirements:

• A maximum of 18 compatible units may be interconnected

(Maximum of 12 Smoke Alarms).

• The same fuse or circuit breaker must power all interconnected units.

• The total length of wire interconnecting the units should be less than

1000 feet (300 meters). This type of wire is commonly available at

Hardware and Electrical Supply stores.

•

All wiring must conform to all local electrical codes and NFPA 70 (NEC).

Refer to NFPA 72, NFPA 101, and/or your local building code for further

connection requirements.

STAND-ALONE ALARM ONLY:

• Connect the white wire on the power connector to the neutral wire

in the junction box.

• Connect the black wire on the power connector to the hot wire in

the junction box.

• Tuck the orange wire inside the junction box. It is used for

inter connect only.

INTERCONNECTED UNITS ONLY:

Strip off about 1/2” (12 mm) of the plastic coating on the orange

wire on the power connector.

• Connect the white wire on the power connector to the neutral wire

in the junction box.

• Connect the black wire on the power connector to the hot wire in

the junction box.

•

Connect the orange wire on the power connector to the interconnect

wire in the junction box. Repeat for each unit you are interconnecting.

Never connect the hot or neutral wires in the junction box to the orange

interconnect wire. Never cross hot and neutral wires between Alarms.

STAND-ALONE ALARM ONLY:

• If you are only installing one Smoke Alarm, restore power to the

junction box.

INTERCONNECTED UNITS ONLY:

• If you are interconnecting multiple Smoke Alarms, repeat steps

1-5 for each Smoke Alarm in the series. When you are finished,

restore power to the junction box.

}}

A. Unswitched 120VAC

60 Hz source

B. To additional units; Maximum = 18 total

(Maximum 12 Smoke Alarms)

1. Smoke Alarm

2. Ceiling or Wall

3. Power Connector

4. Wire Nut

5. Junction Box

6. Neutral Wire (Wht)

7. Interconnect Wire

(Orange)

8. Hot Wire (Blk)

FOLLOW THESE INSTALLATION STEPS

9. For new construction, place supplied dust cover over Alarm to prevent

damage from dust and construction debris. When construction is com-

plete, remove cover.

Smoke will not be able to reach smoke sensor while cover is in place.

Cover must be removed!

Product specificaties

Merk:	First Alert
Categorie:	Rookmelder
Model:	9120B

Heb je hulp nodig?

Als je hulp nodig hebt met First Alert 9120B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Rookmelder First Alert

First Alert SMCO210 Handleiding

24 Juni 2024

First Alert SMCO210V Handleiding

24 Juni 2024

First Alert SMCO100V-AC Handleiding

24 Juni 2024

First Alert SMICO100-AC Handleiding

24 Juni 2024

First Alert SA320 Handleiding

9 April 2024

First Alert P910 Handleiding

31 Augustus 2023

First Alert 7010BSL Handleiding

31 Augustus 2023

First Alert SCO5 Handleiding

31 Augustus 2023

First Alert P900E Handleiding

31 Augustus 2023

First Alert SC07 Handleiding

31 Augustus 2023

Handleiding Rookmelder

Nieuwste handleidingen voor Rookmelder

Kidde CO120X Handleiding

2 December 2024

EQ-3 HM-Sec-SD-2 Handleiding

30 November 2024

EQ-3 HM-Sec-SD Handleiding

30 November 2024

EQ-3 HMIP-SWSD Handleiding

30 November 2024

Pentatech RA170Q Handleiding

24 November 2024

Cordes CC-4100 Handleiding

18 November 2024

Cordes CC-3000 Handleiding

18 November 2024

Cordes CC-500 Handleiding

18 November 2024

Nexa KD-134A Handleiding

18 November 2024

Gloria R-5 Handleiding

16 November 2024