Extech CO100 Handleiding

Extech Niet gecategoriseerd CO100

Lees hieronder de 📖 handleiding in het Nederlandse voor Extech CO100 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
User's Guide
Desktop Indoor Air Quality Monitor
Model CO100
2 CO100-EU-EN-V2.0-11/11
Introduction
Congratulations on your purchase of this Extech Meter. The Carbon Dioxide (CO
2
) Monitor is designed
for air quality control and health control by measuring Carbon Dioxide level in areas where CO
2
could
be a concern. The measured CO
2
value in ppm (parts-per-million), Temperature, Humidity and Time
will be displayed on the LCD along with three CO
2
status indications: Good (0 to 800ppm), Normal
(800 to1200ppm), Poor (>1200ppm). An acoustic alarm sounds when the CO
2
level exceeds a dened
level. This meter is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service.
Operation
1. Power button (rear)
Turns the unit on or o.
2. (rear) HOLD button
Freezes the current reading in the display.
3. (rear) °C/°F button
Selects °C or °F
4. (rear) Clock button
Press and hold this button for 2 seconds to
enter into clock mode. Press the “ ” or “▲ ▼”
button to adjust the ashing digits. Press the
clock button again to step through the
settings (day:month:year;hour:minute).
Press the “ESC” button to exit the clock setting mode.
5. Alarm button
Press the Alarm button once to activate the Alarm mode. The icon appears on LCD
display. If the measured value exceeds the dened value, the alarm will sound and the
display will ash. Press the button again to exit the Alarm mode.
Alarm Value Setting
Press and hold the ALARM button for 2 seconds to enter into setting mode. The icon
will ash.
Press the or ▲ ▼ button to increase or decrease the value.
Press the ESC button to exit the setting mode.
“GOOD-NORMAL” and “NORMAL-POOR” Value Setting
In the Alarm Value Setting mode, press the ALARM button to set the GOOD NORMAL
threshold value. “GOOD NORMAL” will appear in the display. Adjust the value as needed.
Press the ALARM button again to set the NORMAL POOR threshold value. “NORMAL
POOR” will appear in the display. Adjust the value as needed.
Press the ESC button to exit the mode.
6. ▲button
Press this button to increase a value. Press the “ESC” button to exit the function.
7. ▼button
Press this button to decrease a value. Press the ESC button to exit the function.
8. MAX MIN button
Press the button once, the ”MAX” icon appears and the Maximum measured value of
CO2, temperature and humidity will be displayed on the screen. The display will be
updated only if a higher value is measured. Press this button again, the ”MIN” icon
appears and the Minimum measured value of CO2 temperature and humidity will be
displayed on the screen. Press ESC button to exit the function.
3 CO100-EU-EN-V2.0-11/11
9. ESC button
Press this button to exit the current mode.
10. AC adaptor socket
11. Power ON LED
Backlight
Touch the button area below the LCD and the backlight will turn on. It will turn o automatically
after 20 seconds of inactivity. Press “ESC” button at any time to exit the function.
Maintenance
1. The meter should be cleaned with a damp cloth and mild detergent when necessary. Do not use
solvents or abrasives.
2. Store the meter in an area with moderate temperature and humidity.
Specications
Function Range Resolution Accuracy
CO
2
0 to 9999ppm 1ppm ±75 ppm or ±5% of reading
Temperature 23 to 122°F
(-5°C to 50°C) 0.1° ±1.5°C/2.7°F
Humidity 0.1 to 90.0% 0.1% ±5%
Display LCD with backlighting
Sampling Interval: 2 seconds
Overload Indication: “-OL-”
Sensor Type CO
2
: NDIR (non-dispersive infrared) technology
Operating Conditions -5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Storage Conditions -5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Power Supply 110V 220V AC, output 6.0V DC 500mA (supplied) ～≥
Dimensions / Weight 117x102x102mm (4.6x4x4”); 204g (7.2 oz.)
Copyright 2011 Extech Instruments Corporation (a FLIR company) ©
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com

Product specificaties

Merk: Extech
Categorie: Niet gecategoriseerd
Model: CO100

Heb je hulp nodig?

Als je hulp nodig hebt met Extech CO100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Extech

Extech

Extech 380580 Handleiding

22 Oktober 2024
Extech

Extech 380560 Handleiding

25 Juni 2024
Extech

Extech 380396 Handleiding

25 Maart 2024
Extech

Extech HDV600 Handleiding

25 Maart 2024
Extech

Extech 380395 Handleiding

25 Maart 2024
Extech

Extech HDV540 Handleiding

11 December 2023
Extech

Extech 380260 Handleiding

6 December 2023
Extech

Extech DCP36 Handleiding

26 Juni 2023
Extech

Extech CO100 Handleiding

31 Mei 2023
Extech

Extech 380405 Handleiding

28 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024
Profoto

Profoto RFi Softbox Octa Handleiding

24 December 2024
Koenic

Koenic KAP 2523 Handleiding

24 December 2024
Philips

Philips HD9921 Handleiding

24 December 2024
Philips

Philips Senseo HD7008 Handleiding

24 December 2024
Onkyo

Onkyo IRK1804C Handleiding

24 December 2024