Extech DCP36 Handleiding

Extech Niet gecategoriseerd DCP36

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Extech DCP36 (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/10
USER MANUAL
Model DCP36
80W Switching DC Power Supply
User Manual Translaī‡³ons available at www.extech.com
2 DCP36- - _V1.2 /20en US 12
Introducī‡on
Thank you for selecī‡µng the Extech DCP36 laboratory grade W Switching DC Power Supply. The 80
DCP36 is auto-ranging and oī†ers a 0.5~36V and 0~5A output capability. Its maximum current
output at 36V is 2.2A (80W/36V). The maximum voltage output at 5A is 16V (80W/5A).
The voltage/current spectrum is greater than three convenī‡µonal power supplies of the same
power raī‡µng. Adjustable Upper Voltage/Current Limit features protect sensiī‡µve devices from
wide output variaī‡µons. Three user presets allow for easy programming and recall of commonly
used output conī†’guraī‡µons. Master/Slave capability for up to 30 units in parallel connecī‡µon. The
DCP is perfect fo benchwork, ī†’eld service and hobbyists. 36 r ,
The DCP36 is shipped with the following accessories: AC power cord, RJ11 cable, alligator clip test
leads, and an RJ11 terminator plug.
This power supply is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service lease visit the Extech website for the latest user manual and for customer . P
support.
Safety
This manual contains importa informaī‡µon illustraī‡µng the safe and proper use of th power nt is
supply. Read the enī‡µre manual and carefully observe the markings and labels this unit and on on
the equipment to which it will be connected.
Failure to observe may cause injury to persons and damage to the power supply or the connected Warnings
equipment. Failure to observe Cauī‡on statements may result in damage to connected equipment improper and
funcī‡Šoning of the power supply.
WARNINGS
1. Do not use this power supply near water.
2. Do not operate or touch this power supply with wet hands.
3. Do not open the casing of the power supply when it is connected to mains. AC
4. Refer all servicing, including fuse replacement, to qualiī†’ed service personnel.
CAUTIONS
1. Use a grounded 3-terminal source. AC
2. This t is intended for indoor use only. uni
3. Do not operate or place this unit in a humid or dusty environment.
4. Do not expose this device to direct sunlight or place it near a source of heat.
5. Before plugging into the local AC mains, check the raī‡µng label at the ck of the unit. ba
6. Do not block any of the venī‡µlaī‡µon openings the unit. on
7. This unit must be used within the specified ratings; Continuous and excessive loading may cause damage to
the power supply.
8. The gauge size of input power cable must be at least 0. m75m 2 (18awg) and the total length of power
cable must not exceed 3m (10ī†°).
3 DCP36- - _V1.2 /20en US 12
Power Supply Descripī‡‚on
Front and Back Descripī‡Œons
1. Output Voltage Display
2. Output Current or Power Display
3. SLAVE-SHIFT-LOCK funcī‡°on indicators
4. Output ON-OFF buī‡ŗon and indicator
5. Output preset selecī‡°on buī‡ŗons and indicators
6. LOCK and Amp/Waī‡ŗ-meter buī‡ŗon
7. MENU and SHIFT buī‡ŗon
8. Power ON-OFF switch
9. Output terminal egaī‡°ve) (n
10. Output terminal (posiī‡°ve)
11. Current output justment ad
12. Voltage output adjustment
13. Constant Current indicator
14. Constant Voltage indicator
15. Remote Sensing (RS) terminals
16. Alternate output (O/P) terminals
17. 11 Master RJ jack
18. 11 Slave RJ jack
19. Earth Ground terminal
20. AC power jack
Note that there is an addiī†¾onal RJ11 jack on the back of the unit
labeled ā€˜Reservedā€™ that is unused in this model
Display Descripī‡Œons
Constant Voltage mode (C.V. indicator)
The output voltage is kept constant at the set voltage. The
DCP36 remains in CV mode if the load current is lower than
the set current limit otherwise it will switch to CC mo , de.
Constant Current mode (C.C. indicator)
When the load is higher than the set current limit of the set
voltage in CV mode, the Constant Current mode is acī‡°ve.
The output current is kept constant at the set current level
provided that the loading is suī†—ciently large to draw
current equal to or larger than the set current, otherwise it
will switch to the CV mode.

Product specificaties

Merk: Extech
Categorie: Niet gecategoriseerd
Model: DCP36

Heb je hulp nodig?

Als je hulp nodig hebt met Extech DCP36 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Extech

Extech

Extech 380580 Handleiding

22 Oktober 2024
Extech

Extech 380560 Handleiding

25 Juni 2024
Extech

Extech 380396 Handleiding

25 Maart 2024
Extech

Extech HDV600 Handleiding

25 Maart 2024
Extech

Extech 380395 Handleiding

25 Maart 2024
Extech

Extech HDV540 Handleiding

11 December 2023
Extech

Extech 380260 Handleiding

6 December 2023
Extech

Extech DCP36 Handleiding

26 Juni 2023
Extech

Extech CO100 Handleiding

31 Mei 2023
Extech

Extech 380405 Handleiding

28 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec

Vitec MGW Diamond-HX OG Handleiding

23 November 2024
Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024