Extech 380260 Handleiding

Extech Niet gecategoriseerd 380260

Lees hieronder de 📖 handleiding in het Nederlandse voor Extech 380260 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

User Guide

Model 380260

Insulation Tester / Megohmmeter

380260 en- -US_V2.7 6/21

Introduction

Congratulations on your purchase of Extech’s Insulation Tester/Megohmmeter. The Model 380260

provides three test ranges plus continuity and /DC voltage measurement. A handy test lock feature AC

and a data hold function are also included. This professional meter, with proper care, will provide years

of reliable service.

Safety

1. Circuits under test must be de-energized and isolated before connections are made (except for

voltage measurements).

2. Circuit connections must not be touched during a test. Use extreme caution when working near

bare conductors and bus bars. Accidental contact with conductors could result in electrical

shock.

3. Use caution when working near voltages above 60VDC or 30VACrms.

4. After insulation tests, capacitors must be discharged.

5. Test leads (including alligator clips) must be in good working order, clean and without broken

or cracked insulation.

6. When servicing, use only specied replacement parts.

International Safety Symbols

Caution, refer to this manual before using this meter

Dangerous Voltages

Meter is protected throughout by double or reinforced insulation

Meter Description

1. LCD Display

2. Hold Button

3. Test Button

4. Rotary Switch

5. Backlight Button

6. Lock Button

7. Input Terminals

380260 en- -US_V2.7 6/21

Operation

Connecting Test Leads

For all measurements, c nect the red test lead to the V input terminal and the black test lead to on 

the COM input terminal.

Test Lead Check

1. Set the rotary switch to the 200 range.

2. Touch the test lead tips together.

3. Resistance should read less than 0.5 and the audio tone should sound. 

4. With the leads not touching, the display should read infinity indicated by “1”.

5. Readings displayed other than the readings described above are indicative of a test lead

problem. The test leads must be replaced before using the meter. Failure to do so could result

in damage to equipment and electrical shock.

Insulation Resistance Measurements (Megohmmeter Tests)

Warning: Do not perform Insulation Resistance measurements if AC Voltage is present on the device

under test.

1. Connect the red test lead to the V input terminal; black lead to the COM terminal. 

2. Set the function switch to the desired M test voltage position. 

3. Connect the tips of the test leads to the equipment under test. If there is a voltage present, a

constant beep will sound and the voltage will be displayed.

4. The display will show “1“until the TEST button is pushed. Press and hold the TEST button. The

upper right display shows the test voltage applied and the ashing high voltage symbol will

be displayed. The main display shows the resistance.

5. Keep the test leads connect to the equipment under test and release the TEST button. The ed

circuit will discharge through the meter. Keep the test leads connected until the circuit is

completely discharged and the upper right display shows 0 volts.

Lock Function

For hands-free operation, use the LOCK feature.

1. With the test leads connected to the equipment under test, simultaneously press the TEST and

LOCK keys.

2. The LOCK icon will appear on the display. A beeper will sound every 2 seconds to ” ”

indicate that the meter is in Lock mode.

3. Press the LOCK key to disable the Lock function and end the test.

Warning

Ensure that the circuit under test does not include components that can be damaged by 1000VDC; such

devices include power factor correction capacitors, low voltage mineral insulated cables, electronic light

dimmers, and ballasts/starters for fluorescent lamps.

Product specificaties

Merk:	Extech
Categorie:	Niet gecategoriseerd
Model:	380260

Heb je hulp nodig?

Als je hulp nodig hebt met Extech 380260 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Extech

Extech 380580 Handleiding

22 Oktober 2024

Extech 380560 Handleiding

25 Juni 2024

Extech 380396 Handleiding

25 Maart 2024

Extech HDV600 Handleiding

25 Maart 2024

Extech 380395 Handleiding

25 Maart 2024

Extech HDV540 Handleiding

11 December 2023

Extech 380260 Handleiding

6 December 2023

Extech DCP36 Handleiding

26 Juni 2023

Extech CO100 Handleiding

31 Mei 2023

Extech 380405 Handleiding

28 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024