Electro Harmonix Intelligent Harmony Machine Handleiding

Electro Harmonix Niet gecategoriseerd Intelligent Harmony Machine

Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Intelligent Harmony Machine (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Congratulations on your purchase of the Intelligent Harmony
Machine (IHM): a compact, harmony generating, polyphonic
pitch-shifting powerhouse! The IHM creates authentic sound-
ing diatonic harmonies—harmonies within a given key, tracked
from single notes—and performs polyphonic pitch-shifting—
xed pitch shifts independent of key, on both single notes
and chords—all from a standard electric guitar, bass or many
other electronic instruments. It accepts power from 9V bat-
teries and standard 9VDC center-negative power supplies. In
addition to the required input and output jacks, the IHM also
features a dry output jack for extra routing exibility.
WARNING: This device comes equipped with an Electro-Harmonix 9.6DC-200 power sup-
ply. It requires 26mA at 9VDC with a center negative plug. Use of the wrong adapter or
a plug with the wrong polarity may damage the device and void the warranty. Do not
exceed 10.5VDC on the power plug. Power supplies rated for less than 30mA will cause
the device to act unreliably.
Controls and Connections
- 2 -
1. KEY Knob This seven-position rotary switch, in conjunction with the toggle
switch to its right, sets the key the IHM is in while in Intelligent Mode. This
knob has no effect while in Polyphonic Override Mode.
2. KEY Toggle Switch This switch works in conjunction with the knob to its left
to set the key of the IHM. With the switch in its upwards position the key is set
to the sharp variation of the key set by the KEY knob. With this switch in its
downwards position, the key is set to the natural variation of the key set by
the KEY knob. This switch has no effect while in Polyphonic Override Mode.
3. MAJ / MIN Toggle Switch In Intelligent Mode this switch sets whether the
key (set by the KEY knob and switch) is major or minor. In Polyphonic Override
Mode this switch can be used for intervals 3, 4, 7, & 8 (3rds and 2nds) to set
whether the pitch-shift interval is a major 3rd/2nd or a minor 3rd/2nd.
- 3 -
4. POLY-OVERRIDE Button Use this button to switch between Intelligent Har-
mony mode and Polyphonic Override mode. When his switch is lit the IHM is
in Polyphonic Override mode.
5. INTERVAL SELECT Knob This eleven-position rotary switch selects the interval
of the harmony or pitch shift applied to the effect signal. The exact function
of these intervals varies depending on which mode the IHM is in.
6. MIX Knob Sets the mix between the dry and effect (harmony or pitch-shifted)
signal. Fully dry signal at minimum, fully effected signal at maximum.
7. VOL Knob Sets the output volume of the IHM.
8. MOMENT Button When this illuminated button is lit, the IHM is in momen-
tary mode. In momentary mode, the effect is only active while the footswitch
is held down.
9. INPUT Jack This is the input jack for the IHM. The load impedance present-
ed at the INPUT jack is 2.2MΩ.
10. OUTPUT Jack This is the main output for the IHM. The source impedance
presented at the OUTPUT jack is 680Ω.
11. DRY OUT Jack This jack outputs a buffered version of the dry signal present
at the INPUT jack at all times. The source impedance presented at the DRY OUT
jack is 680Ω. Pro Tip: when using DRY OUT, you can set MIX to maximum so
that only the wet signal is present at the OUTPUT jack. Each output jack now
outputs a different set of notes, or a unique signal, that can go to its own amp
or be processed individually.
12. FOOTSWITCH and STATUS LED The footswitch is used to toggle the effect
on and off. When the MOMENT button is lit, the IHM is in momentary mode,
and the effect will only be active while the footswitch is being held down.
With the MOMENT button off, the IHM is in latching mode. In latching mode
pressing and releasing the footswitch once will switch between the IHM being
active and being in buffered bypass mode. The red LED illuminates to indicate
when the IHM is active.
13. 9V Power Jack The included 9VDC, center-negative power supply can be
connected to the power jack to provide power without a battery. The IHM requires
26mA at 9VDC on a center-negative plug. Do not exceed 10.5VDC at the power jack.
When using a 9V battery, plugging into the INPUT jack activates power. The input
cable should be removed when the unit is not in use to avoid running down
the battery. We recommend alkaline batteries for the IHM.
To change the 9-volt battery, you must remove the 4 screws on the bottom of the
IHM. Once the screws are removed, you can take off the bottom plate and change
the battery. Please do not touch the circuit board while the bottom plate is off or
you may damage a component.
Note: When initially powered up (from either an AC adapter or a battery) the
IHM takes two to three seconds to turn on.


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Intelligent Harmony Machine

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Intelligent Harmony Machine stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd