Electro Harmonix Super Switcher Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Super Switcher (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
SUPER SWITCHER
Programmable Effects Hub
Congratulations your purchase the Super Switcher, a full-featured on of
programmable effects that hub is capable controlling your entire rig. Super of The
Switcher able handle jobs is to as simple as an effects loop switcher or as complex
as a programmable effects loop preset designer. The Super Switcher can send tap
tempo to other pedals, includes two general purpose control outputs, and features
MIDI input and output allowing automated control over just about any MIDI device
for nearly endless possibilities. Scratch the surface of tone shaping with the Super
Switcher and achieve studio style effects programming that cannot be
accomplished with traditional pedal ups. more tap dancing! set No
WARNING: Your Super Switcher comes equipped with an Electro-Harmonix 9.6DC-200BI
power supply. The Super Switcher requires 9VDC with a center negative plug. 150mA at
Use wrong adapter a plug with wrong polarity may damage Super of the or the your
Switcher and void the warranty. Do not exceed 10.5VDC on the power plug. Power supplies
rated less than 150mA will cause Super Switcher act unreliably. for the to
F EATURES
Programmable pedal switcher
Mechanical relay switching for true bypass signal paths
8 loops mono & 2 stereo) FX (6
16 Banks 8 presets each of
Pedalboard controller with MIDI and Out In
1 hardwi d insert loop between loops 5 and 6 re FX
2 Instant Access Modes allowing direct control over loops FX
Stereo output boost
Onboard Tap Tempo with TAP output
Tuner output
2 general-purpose control footswitches
2
T C ABLE OF ONTENTS
Notes and Specifications 2
Controls and Connections 3
Ins, Outs, Sends and Returns 3
Illuminated Buttons 4
Footswitches and LEDs 4
Boost and Value Knobs 5
Preset Mode 6
Instant Access Mode 7
Control Functions 8
MIDI Control 9
MIDI Receive Message Tables 11
Setup Menu 12
Restoring Factory Settings 15
Warranty Information and Compliance 16
N S OTES AND PECIFICATIONS
Audio input impedance: 2M ( )buffer or boost only
Audio output impedance for each output: 470 ( )buffer only
Audio output impedance for each output: 1K ( ) boost on
Current draw: 150mA
Maximum input signal level: +11 dBu
Bypass: Mechanical relay true bypass switching
3
C C ONTROLS AND ONNECTIONS
- INS, OUTS, SENDS AND RETURNS -
The Super Switcher has eight switchable effects loops, insert loop, an
mono input and stereo outputs.
Mono Input: Connect your guitar instrument the jack. or to IN
Stereo Outputs: Connect your amp(s), other effects pedals mixer or to
the OUT L and OUT R jacks. recommend only using the L channels We if
working mono throughout your signal chain. in
Mono Effects Loops 1-6: Active when illuminated buttons -6 are lit. L1
Effects loops 1-6 are mono loops arranged series. Loops 1-6 in
correspond respectively the illuminated buttons - When the to L1 6.
illuminated button lit, the corresponding effects loop active and is is
the signal routed out the SEND jack and through the is in RTN
(return) jack.
NOTE: the loop active with nothing plugged into it, the signal If is
will off and sound will come out the output. be cut no of
Insert Loop: Always , hardwired between effects loops 5 and on loop 6.
Series insert loop placed between effects loops 5 and 6 is
When nothing plugged into the SEND and RETURN the insert is of
loop the signal bypasses the insert loop.
If effect placed the insert loop, the signal will always an is in be
routed through the effect.
Perfect for always having manual control a certain effect. of
Ideal for always type effect such a volume pedal. an ON of as
The Insert Loop active even when master bypass engaged. is is
Stereo Effects Loops 7- 8: Active when buttons -8 are lit.L7
Effects loops 7 & 8 are stereo loops arranged series. When either in
of the illuminated buttons are (L7- , the corresponding effects ir lit 8)
loop is active.
Loop 7 has a single, mono SEND jack.
Loop 7 has separate left and right jacks. RTN
Loop 8 has separate left and right SEND jacks.
Loop 8 has separate left and right jacks. RTN
Loop 7 8 can used mono: connect only their L channels. or be in to


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Super Switcher

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Super Switcher stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd