Creative C-Horse+ Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Creative C-Horse+ (2 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 96 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Model No.: EF1060
PN: 03EF106000000 Rev A
WIRELESS BONE CONDUCTION HEADPHONES
WITH MULTIPOINT CONNECTIVITY
QUICK START GUIDE
Overview Wireless Pairing
Volume + Button
Volume - Button
LED Indicator
Magnetic Charging Port
Omni-directional Microphone
Multifunction Button (Power On / Oîș†, Play /
Pause, Call / Wireless Connection)
1
1
2
3
4
5
6
2
3
4
5
6
© 2022 Creative Technology Ltd. All rights reserved. Creative and the
Creative logo are trademarks or registered trademarks of Creative
Technology Ltd in the United States and/or other countries.
Siri is a trademark of Apple Inc., registered in the U.S. and other
countries. All other trademarks are the property of their respective
owners and are hereby recognized as such. All speciîș‰cations are
subject to change without notice. Actual product may diîș†er slightly
from images shown. Use of this product is subject to a limited warranty.
REGISTER
YOUR PRODUCT
creative.com/register
TECHNICAL SUPPORT
creative.com/support
Wireless Pairing
Creative C-Horse+ will automatically initiate
wireless pairing after powering on. If you would
like to manually pair your mobile device with
the headphones at a later time, follow the
instructions below:
1. Press and hold the Multifunction button
for 5s when the headphones are powered oîș†
to initiate wireless pairing
2. On your mobile device, turn Bluetooth on
and select “ ” from the list of C-Horse+ CT08
discovered devices to pair
Multipoint Pairing
1. Disconnect the headphones from the îș‰rst mobile
device. The headphones will automatically
initiate wireless pairing upon disconnection
2. On the second mobile device, select the
headphones again from the list of discovered
devices to pair
3. Upon successful pairing to the second mobile
device, reconnect the îș‰rst mobile device to the
headphones to complete Multipoint Pairing
Multipoint connection is established when the above
steps are performed successfully and Bluetooth is
turned on across both mobile devices
Controls
Powering On / Oîș† Call ModePlayback Mode
Button Button ButtonAction Action Action
ON
OFF
2s x1 1s
3s x1
Notes: MP3 Player, Voice Assistant, and Low Latency switch can only be triggered when no audio is playing.
1s
1s
x1
x1
x3
x2
x4
Siri Google Assistant
ON OFF
For the full terms and detailed
information on the Warranty, please visit
creative.com/compliance/C_HorsePlus,
or scan the QR code.
Other Information
Please visit creative.com/support/C_HorsePlus
for user guide and safety and regulatory
information.
Registering your product ensures you receive the most
appropriate service and product support available. You
can register your product at creative.com/register.
Please note that your warranty rights are not dependent
on registration.
Creative warrants the included Creative-branded hardware
product (the “Product”) against defects in materials and
workmanship (“Defect(s)”) for twelve (12) months (for the
European Union, twenty-four (24) months (excluding all
wear and tear), subject to certain exceptions as stated in
the EU Directive 1999/44/EC) from the date of purchase.
The Creative Limited Hardware Warranty (the “Warranty”)
does not cover (but not limited to) consumable parts,
such as batteries or protective coatings that, due to their
nature, tend to diminish over time; normal wear and tear,
accidents or misuse. You must provide Creative proof of
original purchase of the Product by a dated itemized
receipt to be eligible for the Warranty. If a Defect arises and
a valid claim is received during the applicable Warranty
Period, Creative will at its sole option, service the Product
at no charge using new or refurbished replacement parts
at our sole discretion. Warranty beneîș‰ts are in addition to
rights provided under local consumer laws.
PRODUCT REGISTRATION
AND WARRANTY
LED Indicators Technical Speciîș‰cations
Headphone Drivers: Bone Conduction Transducers
Frequency Response: 20–20,000 Hz
Microphones: Omni-directional x 1
Audio Codec: SBC
Wireless Operating Frequency: 2402–2480 Hz
Wireless Operating Range: Up to 10m / 33 ft
Voice Assistant Support: Siri and Google Assistant
Built-in Memory Capacity: 8 GB
Supported Music Formats: MP3, FLAC, WAV, M4A, APE
Playtime: Up to 8 Hours*
Charging Time: Up to 2 Hours
Charging Interface: USB-A (Charging and Data
Transfer)
Battery Type: Rechargeable Lithium Polymer Battery
180 mAh 0.666 Wh
Input: 5V 0.5A
Operating Temperature: 0–45°C
Maximum RF Output Power: 4 dBm
Weatherproof IP Rating: IPX7
*Based on moderate volume level. Actual battery life will vary
with use, settings, songs, and environmental conditions
Master Reset
To initiate a Master Reset, enter wireless pairing
mode, then press and hold the Volume + and
Volume - buttons for 3s. Upon completion,
Creative C-Horse+ will play a voice prompt of
“Power Oîș†â€ before powering oîș†.
Master Reset is reserved for cases where users
encounter issues while headphones are in use or
during situations such as: wireless pairing failure,
random LED blinking, or to reset all data.
3s
Wireless Connection
Established
Blinks blue once every 5s
when audio is playing
Blinks blue twice every 5s
when no audio is playing
Alternate red and blue
Wireless Pairing /
Multipoint Connectivity
1 2
Solid blueFully Charged
Low Battery Blinks red every 3s
Solid redCharging
Charging Creative C-Horse+
Ensure that the magnetic charging cable is
securely connected to the headphones’ magnetic
charging port before connecting it to a power
source to charge. If the magnetic charging cable
is not secured or if it is connected incorrectly,
remove the cable, and reconnect it to the
headphones. It is essential for the headphones
to be connected securely and properly to the
charging cable to prevent short circuit when there
is an active current.
Transferring Audio Files
1. Power oîș† the headphones to prepare for data
transfer
2. Connect the magnetic charging cable to the
headphones’ magnetic charging port, then,
connect the other end to an available USB-A
port on your PC or Mac
3. Creative C-Horse+ will be detected as a mass
storage device on your PC or Mac. Drag and
drop the audio îș‰les onto the mass storage
device to begin data transfer
4. Once the data transfer is complete, safely eject
the mass storage device from your PC or Mac
Important: Do not disconnect the USB cable while
data transfer is in progress. Disconnecting the USB
cable without safely ejecting the mass storage
device may result in loss of data or damage to the
built-in memory


Product specificaties

Merk: Creative
Categorie: Hoofdtelefoon
Model: C-Horse+

Heb je hulp nodig?

Als je hulp nodig hebt met Creative C-Horse+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon Creative

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon