Calculated Industries Construction Master Pro DT Handleiding
Calculated Industries
Rekenmachine
Construction Master Pro DT
Lees hieronder de 📖 handleiding in het Nederlandse voor Calculated Industries Construction Master Pro DT (4 pagina's) in de categorie Rekenmachine. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
User Instructions
Rev. 3/14
AGGRESSOR HEX LED
©2013 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 2 ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 3
Aggressor HEX LED Warranty Registration
The Aggressor HEX LED two year (730 days) limited war carries a -
ranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Aggressor HEX LED Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• 12W “6-in-1” (RGBCAW) “Hex Color” LEDs
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Aggressor HEX LED General Instructions
Introduction:
Thank you for purchasing the ADJ Aggressor HEX LED. To optimize
the performance of this product, please read these operating instruc-
tions carefully to familiarize yourself with the basic operations of this
unit. The Aggressor HEX LED is a bright, six color, rotating moon ower
eect. The unit operates in sound-active mode only.
Customer Support:
ADJ Products, LLC provides a toll free customer support line, to pro-
vide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.adj.com for any comments or suggestions.
Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
Do not discard the shipping carton in the trash. Please recycle when
ever possible.
Aggressor HEX LED Introduction
The unit should be mounted using a mounting clamp (not provided),
axing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is rmly xed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
Aggressor HEX LED Installation
Aggressor HEX LED Operation
ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 5ADJ Product, LLC - www.adj.com - Aggressor HEX LED Instruction Manual Page 4
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the fuse blown. The fuse has not is located on the rear
panel.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may not
activate the unit.
Aggressor HEX LED Trouble Shooting
Aggressor HEX LED Fuse Replacement
Aggressor HEX LED Cleaning
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses must be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fix-
ture operates (I.e. smoke, fog residue, dust, dew). In heavy club use
we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.
Introduction: The ADJ Aggressor HEX LED is a 6-in-1 LED moon-
ower eect. This fixture is designed for mobile DJ’s, clubs, bands,
roller rinks and any arena that requires a compact, light weight, easy
to use unit.
General Operation: This fixture is designed to operate as a stand
alone sound active unit, there is no need of a controller. It has been
tested and there is no assembly necessary. The Aggressor HEX LED
is ready to be plugged in out of the box, there is no power switch.
Plug the unit in to a matching power outlet or into a power pack.
Light output will be immediate when the unit is powered on. The unit
must receive a sound source to operate normally. Use the sound
sensitivity knob on the rear of the unit to adjust the sound sensitivity.
Turning it clockwise will make it more sensitive to sound, turning it
counter-clockwise will make it less sensitive.
Fuse Replacement: First unplug the power. The fuse holder is
located at the rear of the unit next to the power cord. Using a flat-
head screw driver unscrew the fuse holder. Remove the bad fuse and
replace with a new one.
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 10 xtures maximum. After 10 xtures you will need
to use a new power outlet. They must be the same xtures. DO
NOT mix xtures.
Aggressor HEX LED Power Cord Daisy Chain
Product specificaties
| Merk: | Calculated Industries |
| Categorie: | Rekenmachine |
| Model: | Construction Master Pro DT |
Heb je hulp nodig?
Als je hulp nodig hebt met Calculated Industries Construction Master Pro DT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Rekenmachine Calculated Industries
14 Juli 2023
14 Juli 2023
14 Juli 2023
14 Juli 2023
14 Juli 2023
14 Juli 2023
Handleiding Rekenmachine
- Rekenmachine Braun
- Rekenmachine HP
- Rekenmachine Casio
- Rekenmachine Canon
- Rekenmachine Addimult
- Rekenmachine Basetech
- Rekenmachine Genius
- Rekenmachine Global Tronics
- Rekenmachine GlobalTronics
- Rekenmachine Ibico
- Rekenmachine Lexibook
- Rekenmachine Rex
- Rekenmachine Sanyo
- Rekenmachine Sencor
- Rekenmachine Sharp
- Rekenmachine Sigma
- Rekenmachine Taurus
- Rekenmachine Texas
- Rekenmachine Texas Instruments
- Rekenmachine Tiger
- Rekenmachine United Office
- Rekenmachine Victor
- Rekenmachine Olivetti
- Rekenmachine Olympia
- Rekenmachine Omron
- Rekenmachine Citizen
- Rekenmachine Trevi
- Rekenmachine Genie
- Rekenmachine Aurora
- Rekenmachine Milan
- Rekenmachine Q-CONNECT
- Rekenmachine Rexel
- Rekenmachine XD Enjoy
- Rekenmachine Victor Technology
Nieuwste handleidingen voor Rekenmachine
14 December 2024
1 December 2024
23 November 2024
23 November 2024
18 November 2024
8 Juli 2024
9 Juni 2024
4 Mei 2024
4 Mei 2024
4 Mei 2024