Boska Cheese Commander Pro+ Handleiding

Boska Snijmachine Cheese Commander Pro+

Lees hieronder de 📖 handleiding in het Nederlandse voor Boska Cheese Commander Pro+ (28 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
885060 GOL20M 1
EN
INSTALLATION & USE
1. Place the Cheese Commander Pro+ (hereafter, the CCP+) on your counter or any other at sur-
face. The non-slip suction cups work best on sturdy, clean, dry, smooth and non-textured surfaces.
Place the CPP+ against the edge of the counter/surface, facing you.. Make sure the handle is in front.
2. Press the CCP+ down firmly to make the suction cups adhere to the counter/surface. Check to
make sure the CCP+ is properly secured.
1x 6x4x
CONTENTS:
2
1
How to cut the cheese
The device is designed for cutting soft to semi- hard cheeses. For relatively hard cheeses, make sure
to score the rind with a Scoring Knife.
1
23
Optional:
885060 GOL20M 2
EN
CLEANING
Clean the CCP+ every day after the last use, and between cheese types to prevent
cross-contamination.
Use hot water, a soft brush and a neutral detergent, such as dish soap, to clean the CCP+.
Hot water up to 158° F can be used, higher temperatures may cause damage to the plastic
parts of the CCP+
Never clean with a hard-bristle brush, abrasive materials, baking soda, disinfecting or
corrosive cleaning agents.
Rinse the CCP+ with clean water. Dry the machine thoroughly.
The CCP+ is dishwasher safe up to 158 ° F.
WARNING
The CCP+ is only intended for cutting soft to semi-hard cheeses.
Using the CCP+ for harder cheeses can cause a breaking of the wires or a shortening of the
lifespan of the wires.
As an additional safety measure to make sure the CCP+ does not come off the counter top,
please always position the hand not used to cut the cheese on the CCP+
TECHNICAL INFORMATION
Dimensions 400x305x111mm / 15.7x12x4.4 inch
Weight 1.44kg / 3.17 lbs
Material ABS, PP and PA Plastic, Silicone, Stainless Steel, Aluminum
REPLACING THE SUCTION CUPS
1
2
3
885060 GOL20M 3


Product specificaties

Merk: Boska
Categorie: Snijmachine
Model: Cheese Commander Pro+

Heb je hulp nodig?

Als je hulp nodig hebt met Boska Cheese Commander Pro+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Snijmachine Boska

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine