Black Lion Audio SEVENTEEN 500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Black Lion Audio SEVENTEEN 500 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
©2023 Black Lion Audio. The Black Lion
Audio “Lion Face™” logo, BLA, are trademarks
or registered trademarks of Black Lion
Audio. This manual and any associated
intellectual property are subject to copyright
protection. No part of this document may
be reproduced in any form without explicit
written consent from Black Lion Audio.
Notice This manual provides general information, prepara-
tion for use, installation and operating instructions for the
Black Lion Audio Seventeen 500. The information contained
in this manual is subject to change without notice. Black Lion
Audio makes no warranties of any kind with regard to this
manual, including, but not limited to, the implied warranties
of merchantability and tness for a particular purpose. Black
Lion Audio shall not be liable for errors contained herein or
direct, indirect, special, incidental, or consequential damag-
es in connection with the furnishing, performance, or use of
this material.
SEVENTEEN 500 500-SERIES FET LIMITING AMPLIFIER
Ownerâs
Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus that produce heat.
9. Use only attachments/accessories specied by the manufacturer
10. Use only with a cart, stand, tripod, bracket or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid in-
jury from tip-over.
11. Unplug this apparatus during lightning storms or when unused for
long periods of time.
12. Refer all servicing to qualied service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally, or has been
dropped.
13. This apparatus shall not be exposed to dripping or splashing, and
no object lled with liquids, such as vases, shall be placed on the
apparatus.
14. Any changes or modications not expressly approved in this manu-
al could void your authority to operate this apparatus.
COMPLIANCE
The Black Lion Audio Seventeen 500 complies with all applicable
CE / RoHS / WEEE European Union directives.
Do not attempt to service this unit yourself, as it will void your warran-
ty. Please check your unit carefully upon receipt and return to place
of purchase immediately if there are any problems with the product.
After that, the standard Black Lion Audio 3 YEAR warranty will apply
to defects in materials and workmanship.
U.S.A.
Should your Black Lion Audio product require service,
please contact us on our customer service site:
https://www.blacklionaudio.com/contact. You must obtain an RA #
(Return Authorization number) from us before shipping a unit back to
us. This RA # must be clearly written on the outside of the box.
Please safely pack the units…It is best to use the original packing
materials. Black Lion Audio cannot be responsible for any damag-
es incurred in shipping to us due to poor packaging. PLEASE PACK
CAREFULLY and FULLY INSURE THE SHIPMENT.
INTERNATIONAL
For service or warranty assistance, please contact the Black Lion Au-
dio distributor in your country through the dealer from whom you pur-
chased this product.
LIMITED 3 YEAR WARRANTY
Black Lion Audios Seventeen 500 is warranted by Black Lion Audio to
be free from defects in materials and workmanship for the period of
THREE (3) YEARS to the original purchaser. In the event of such defects,
the product will be repaired without charge or, at our option, replaced
with a new one if delivered to Black Lion Audio prepaid, together with a
copy of the sales slip or other proof of purchase date. The warranty ex-
cludes problems due to normal wear, abuse, shipping damage or failure
to use the product in accordance with the specications.
All parts and labor are covered under this Limited Warranty. However,
if it is determined by Black Lion Audio that the device was damaged or
made defective through abuse, we reserve the right to charge the cus-
tomer for the cost of the repair.
Black Lion Audio shall not be liable for damages based upon inconve-
nience, loss of use of the product, loss of time, interrupted operation or
commercial loss or any other damages, whether incidental, consequen-
tial or otherwise. This warranty gives you specic legal rights, and you
may have other rights, which will vary from state to state.
This warranty is not transferable.
SPECIFICATIONS
Attack Continuously variable 20uS to 800uS
Release Continuously variable 1200mS to 50mS
Sidechain HPF: OFF, 100Hz, 200Hz
Ratio Pushbutton selected 4:1, 8:1, 12:1, 20:1 or any
other combination
Voltage ± 16v
Dimensions Width:76 mm (3”)
Height: 178 mm (5.25”)
Depth: 229 mm (9”)
Weight 1.47 kg (3.25 lbs)
QUICK START GUIDE
INSTALLATION
1. Mute your studio monitors.
2. Power OFF the chassis.
3. Inspect Seventeen 500 and make sure nothing is surrounding the
card edge connector.
4. Carefully slide Seventeen 500 into an empty slot in your power
chassis.
5. Make sure the module connectors sits well into the mating Edac
chassis connector.
6. Secure the Seventeen 500 to the chassis using the four
front-mounted screws.
7. Power ON the power chassis.
INITIAL SETUP:
Using balanced XLR cables, connect the Seventeen 500s inputs and
outputs from your 500-series chassis to your mixing bus or patch bay.
If you are using two Seventeen 500s in parallel (or stereo), connect the
two units using an RCA cable between the front-mounted RCA jacks.
Set all controls to full counter-clockwise position, and all pushbuttons
deselected or in the off position. Set the Bypass button to the on posi-
tion, and apply power.
Unmute the monitors, and verify that signal is passing to and from the
unit. Set the INPUT, OUTPUT, ATTACK and RELEASE controls to about
12 oclock, set COMP MIX to full clockwise, select RATIO 4, and press the
Bypass button. Increase the INPUT until the meter is deecting a few
dB. Again, verify signal is passing through the unit. Done!
For proper performance, balanced XLR must be used for all inputs and
outputs.
A note on the Attack control:
The Attack control on the Seventeen 500 works a little differently than
you may have encountered on other ‘76-style compressors. Turning the
Attack knob to the left (counter-clockwise) will yield faster attack times;
slower times result when turning to the right (clockwise). We’ve found
this control scheme to be more intuitive; akin to a volume knob decreas-
ing level to the left and increasing to the right.
Attack: Continuously variable 20uS to 800uS
Release: Continuously variable 1200mS to 50mS
A note on stereo linking
The Link button activates the RCA input jack in the front of the module
for stereo pairing. The link button must be engaged on both units, with
an RCA cable attached between them to achieve successful pairing. The
Seventeen 500 does not utilize the internal link bus within some 500-se-
ries frames; the linking feature is completely independent.
When running a pair of Seventeen 500s via a stereo link, start by setting
both units to matched settings, as the detector circuits are the linked
elements - not the controls. Note that due to design limitations of the
76-style compressors, no two units will ever be 100% matched without
an external battery-powered balancing box. If you don’t have a balancing
box, you may need to make slight alterations to the Input and Output
controls to create perfect stereo matching.
CONTROLS
1. Input: Sets the threshold and controls the level at which the com-
pressor starts compressing
2. Output: Applies makeup gain to compressed signal to compensate
for signal lost during compression
3. Attack: Controls the amount of time it takes for the unit to react to
an incoming signal
4. Release: Controls the speed at which the compressor releases the
compressed signal
5. Comp Mix: Allows the user to blend the dry uncompressed signal
with the wet compressed signal to allow more natural sounding
compression
6. Ratio: Controls the amount of compression applied. (Yes, it does
all-buttons-in-mode, and other combinations. Experiment!)
7. Sidechain high-pass lter: Choose between 200 Hz and 100 Hz
cutoff for Sidechain input lter. Use this to prevent low-frequency
sounds from triggering the compressor.
8. Link: Use this to engage stereo link when connected to another
Seventeen 500. Be sure to engage the Link feature on both con-
nected units.
9. Comp: Engages/bypasses the compressor circuit.
10. RCA Stereo Link: Use standard 2-conductor RCA cable, required
for stereo linking.
5
3
7
9
6
1
4
10
8
2


Product specificaties

Merk: Black Lion Audio
Categorie: Niet gecategoriseerd
Model: SEVENTEEN 500

Heb je hulp nodig?

Als je hulp nodig hebt met Black Lion Audio SEVENTEEN 500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Black Lion Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Smeg

Smeg GTA-6 Handleiding

21 November 2024
Smeg

Smeg KIT6CX Handleiding

21 November 2024
Senal

Senal SCS-98 Handleiding

21 November 2024
Senal

Senal ASM-6 Handleiding

21 November 2024
Senal

Senal ASM-MNTKIT Handleiding

21 November 2024
Senal

Senal SMS-45 Handleiding

21 November 2024
Smeg

Smeg KIT6PX Handleiding

21 November 2024
Senal

Senal SCI-3212MP Handleiding

21 November 2024
Senal

Senal OLM-2S-P Handleiding

21 November 2024