Black Lion Audio PG-1 mkII Handleiding

Black Lion Audio Niet gecategoriseerd PG-1 mkII

Lees hieronder de 📖 handleiding in het Nederlandse voor Black Lion Audio PG-1 mkII (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

dio ‘Lion Face’ logo, BLA, PG-1 are trademarks

or registered trademarks of Black Lion Audio.

This manual and any associated intel-

lectual property are subject to copyright

protection. No part of this document may

be reproduced in any form without explicit

written consent from Black Lion Audio.

Notice

This manual provides general information, preparation for

use, installation and operating instructions for the Black Lion

Audio PG-1 mkII Power Conditioner.

The information contained in this manual is subject to

change without notice. Black Lion Audio makes no warran-

ties of any kind with regard to this manual, including, but not

limited to, the implied warranties of merchantability and t-

ness for a particular purpose. Black Lion Audio shall not be

liable for errors contained herein or direct, indirect, special,

incidental, or consequential damages in connection with the

furnishing, performance, or use of this material.

PG-1 mkII

Studio-grade power conditioner and surge protector

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or third prong is provided for your safety. If the pro-

vided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particular-

ly at plugs, convenience receptacles, and the point where they exit

from the apparatus. If the power cord becomes frayed, stop using

immediately.

11. Use only attachments/accessories specied by the manufacturer

12. Use only with a cart, stand, tripod, bracket or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid in-

jury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate normally, or has been

dropped.

15. This apparatus shall not be exposed to dripping or splashing, and

no object lled with liquids, such as vases, shall be placed on the

apparatus.

16. Note that this apparatus is not completely disconnected from the

AC mains service when the power switch is in the OFF position.

17. The mains plug or power inlet on the product is used as the discon-

nect device, so the disconnected device shall remain readily opera-

ble when reconnected.

18. Any changes or modications not expressly approved in this manu-

al could void your authority to operate this apparatus.

IMPORTANT !

Be sure to use a three prong AC cable that properly ts the power

source. Please use the correct fuse designated on the rear panel be-

fore plugging in the power cord. Improper selection can result in dam-

age to the unit that will not be covered under the warranty.

The lightning ash with an arrow-

head symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsu-

lated “dangerous voltage” within

the product’s enclosure that may

be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

This product complies with all international standards for safety and

emissions including IEC62368 and FCC Part 15-B.

Do not attempt to service this unit yourself, as it will void your warran-

ty. Please check your unit carefully upon receipt and return to place

of purchase immediately if there are any problems with the product.

After that, the standard Black Lion Audio 3 YEAR warranty will apply

to defects in materials and workmanship.

U.S.A.

Should your Black Lion Audio product require service,

please contact us on our customer service site:

https://www.blacklionaudio.com/contact. You must obtain an RA #

(Return Authorization number) from us before shipping a unit back to

us. This RA # must be clearly written on the outside of the box.

Please safely pack the units…It is best to use the original packing

materials. Black Lion Audio cannot be responsible for any damag-

es incurred in shipping to us due to poor packaging. PLEASE PACK

CAREFULLY and FULLY INSURE THE SHIPMENT.

INTERNATIONAL

For service or warranty assistance, please contact the Black Lion Au-

dio distributor in your country through the dealer from whom you pur-

chased this product.

LIMITED 3 YEAR WARRANTY

Black Lion Audio’s PG-1 mkII is warranted by Black Lion Audio to be free

from defects in materials and workmanship for the period of THREE (3)

YEARS to the original purchaser. In the event of such defects, the prod-

uct will be repaired without charge or, at our option, replaced with a new

one if delivered to Black Lion Audio prepaid, together with a copy of the

sales slip or other proof of purchase date. The warranty excludes prob-

lems due to normal wear, abuse, shipping damage or failure to use the

product in accordance with the specications.

All parts and labor are covered under this Limited Warranty. However,

if it is determined by Black Lion Audio that the device was damaged or

made defective through abuse, we reserve the right to charge the cus-

tomer for the cost of the repair.

Black Lion Audio shall not be liable for damages based upon inconve-

nience, loss of use of the product, loss of time, interrupted operation or

commercial loss or any other damages, whether incidental, consequen-

tial or otherwise. This warranty gives you specic legal rights, and you

may have other rights, which will vary from state to state.

This warranty is not transferable.

QUICK START GUIDE

Once you have installed your PG-1 mkII where you need it, plug it in to

an appropriate power source. If you are not sure your source is correct,

consult with your local power company.

Plug in your equipment to the correct outlets on the PG-1 mkII.

Turn on the power. The digital and analog outlets are switched with a

delay sequence. The digital and analog outputs turn on with the power

switch and turn off after a six second delay. The high current outputs

turn on after six seconds and turn off with the power switch. This allows

any startup sequences to be nished before the high current devices

are turned on.

1. ON/OFF Switch: Once the PG-1 mkII is plugged into a grounded

120VAC outlet, turning the front panel POWER switch to the ON

position will sequentially power the components plugged into the

rear panel outlets.

2. GROUND OK: When this is on, the PG-1 mkII is plugged into a proper-

ly grounded power source. If the LED is not on, unplug the unit from

the power source and correct the fault.

3. Wiring Fault: This indicates the LINE and NEUTRAL wires in the

source are reversed. Unplug the unit immediately and consult an

electrician to x the fault.

4. Clean Power On: This LED indicates that the PG-1 mkII is providing

clean, beautiful AC power to all connected components.

5. Abnormal Voltage: When this LED is ON, the PG-1 mkII is warning

about under/over voltage.

6. Protection ON: When this LED is on, the PG-1 mkII’s power surge

circuitry is functioning correctly. If this LED is OFF, the circuit has

malfunctioned. If it is OFF, unplug the unit immediately.

7. Digital Filter (Switched) Outlets: These outlets have a special lter

circuit that is designed to reduce AC supply interference to your

digital components (workstation, digital effects, etc.). They also

isolate the rest of your system from noise generated by the digital

components themselves.

8. Analog Audio Filter (Switched) Outlets: These outlets have a spe-

cial lter circuit that reduces audible noise in your analog compo-

nents (mixers, dynamic effects, etc.)

9. High Current Filter (Timed) Outlets: These outlets have a special

lter circuit designed to handle high current components like power

ampliers or Active Speakers.

10. Gold-plated ground post: Provides a connection point for any un-

grounded components.

11. Thermal Circuit Breaker: protects the PG-1 mkII from power over-

load.

12. Breaker Open: When this LED is on, the thermal circuit breaker has

tripped due to an overload. Before resetting the breaker, nd the

reason for the overload.

13. Ultra-high Current AC Power Cable: integral high power, heavy duty

AC cable to maximize power transfer to high current components

such as ampliers.

14. Dimmer: This know controls a exible accessory light. Push on/off

and turn clockwise for brightness.

15. 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an accessory

lamp.

16. Numerical Display: Three-character LED displays the line voltage

at the source.

17. Unswitched Convenience Outlets: These are ‘always on’ ltered

power outlets.

18. USB Charger: 5V1A convenience charger for USB devices.

Note: For best performance we recommend plugging analog compo-

nents into the analog outlets and digital to digital. It will not harm any

components if they are plugged into any other outlet.

SPECIFICATIONS

Voltage 115VAC 15A max

AC Mains Input NEMA standard plug

Dimensions Width 438mm (19”)

Height 44mm (1U)

Depth 250mm

Weight 4.2+kg

IEC

62368

On with panel switch

off after six seconds

16 181715112

87 9 10 13

2 3 5 64

On after six seconds

off with panel switch

Product specificaties

Merk:	Black Lion Audio
Categorie:	Niet gecategoriseerd
Model:	PG-1 mkII

Heb je hulp nodig?

Als je hulp nodig hebt met Black Lion Audio PG-1 mkII stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Black Lion Audio

Black Lion Audio Revolution 14x16 Handleiding

10 December 2024

Black Lion Audio Micro Clock MkIII XB Handleiding

20 November 2024

Black Lion Audio PG-P Type C Handleiding

31 Juli 2024

Black Lion Audio PBR TRS3 Handleiding

30 Juli 2024

Black Lion Audio PBR TT Handleiding

30 Juli 2024

Black Lion Audio PG-X Type C Handleiding

29 Juli 2024

Black Lion Audio Revolution 2x2 Handleiding

29 Mei 2024

Black Lion Audio Revolution 6x6 Handleiding

26 Mei 2024

Black Lion Audio SEVENTEEN 500 Handleiding

25 Mei 2024

Black Lion Audio Revolution EXP Handleiding

25 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina Welcome Pad Handleiding

22 December 2024

Inglesina Front Handleiding

22 December 2024

Inglesina Newborn Winter Muff Handleiding

22 December 2024

Inglesina Stroller Winter Muff Handleiding

22 December 2024

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024