Ansmann ALCT 6-24/2 Handleiding

Ansmann sạc pin ALCT 6-24/2

Lees hieronder de 📖 handleiding in het Nederlandse voor Ansmann ALCT 6-24/2 (36 pagina's) in de categorie sạc pin . Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

OperatinginstructiOns

DBedienungsanleitung

FManueld’utilisatiOn

ИНСТРУКЦИЯ

IManualed’istruziOne

HHasználatiutasítás

EinstrucciOnesdeManejO

lietOšanasinstrukcİja

Pinstruções

geBruiksaanwijzing

zastOsOwanie

návOdkpOužití

kasutusjuHis

navOdilazaupOraBO

 zapOlnilnik

instructiunideutilizare

ALCT 6-24/1 ALCT 6-24/2

 InstructIon manual

useOFtHecHarger

Automatic charger for lead acid-/sealed lead acid batteries 6 V;12 V; 24 V.

Features

> For automatic charging of all types of lead acid batteries and sealed lead acid batteries with

output voltage 6 V; 12 V; 24 V

> Protection against short circuit and wrong polarity

> Protection against overcharging

> Charging with IU-curve

> Suitable for float charging

> Trickle charging

saFet YinstructiOns

> Please read the operating instructions before use.

> Keep your charger in a dry place (indoor use only)

> Only for use within this specification

> In order to avoid the risk of fire and /or electrical shock, the charger must be protected

against high humidity and water

> Do not open or reconstruct the charger

> In case of defect, please return to an authorised service center

> Do not subject the equipment to high temperatures or to high humidity.

> To clean the charger, please disconnect it from the mains

> Only use a dry cloth for cleaning

> Do not operate the device without adult supervision

> Keep out of reach of children.

If the safety instructions are not followed, this may cause damage to the device or serious

injury to the user.

displ aY

green LED “POWER” on: ready for use

red LED “CHARGE” on: charging of the battery

red LED “CHARGE” off: end of charging / trickle charging

attentiOn

Only for charging rechargeable lead acid batteries with 6 V (3 cells); 12 V (6 cells) or 24 V (12

cells). Do not charge other types of batteries - Danger of explosion!

cOMMissiOning

Connect the battery with the battery clips of the charger. Pay attention to the correct polarity.

The red clip with (+), the the black clip with (-). Plug the charger into a convenient mains

socket. After connecting the charger will start the charging procure automatically. The green

LED shows reday for use, the red LED indicates charging. After charging the red charging LED

switches off and the battery is provided with trickle charging. The battery is now fully charged

and ready for use.

warning

When charging lead acid cells, explosive gases can develop. Avoid open fire and sparks.

speciFicatiOn:

Input: 230V 50Hz

Voltage of the battery end of charging voltage max. charging current

ALCT6-24/1 ALCT 6-24/2

6 Volt 6,9 V 1000 mA 1500 mA

12 Volt 13,8 V 1000 mA 2000 mA

24 Volt 27,6 V 700 mA 1000 mA

Product specificaties

Merk:	Ansmann
Categorie:	sạc pin
Model:	ALCT 6-24/2
Kleur van het product:	Zwart
Gewicht:	380 g
Breedte:	123 mm
Diepte:	43 mm
Hoogte:	50 mm
Snoerlengte:	2 m
Soort:	Batterijlader voor binnengebruik
LED-indicatoren:	Bezig met opladen
Meegeleverde kabels:	AC
Ondersteund aantal accu's/batterijen:	1
Ingangsspanning:	230 V
Stroomspanning bescherming:	Short circuit, Under current
Frequentie:	50 Hz
Compatibele batterij technologiën:	Sealed Lead Acid (VRLA)