Alcatel Baby Link 700 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Alcatel Baby Link 700 (2 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Before use
You ay test the bab before initial e, and at regular m y monitor us
times thereafter.
To test your baby monitor:
1. Place the parent unit and the baby unit in the same room to test
the product.
2. Press and hold on the parent unit the screen displays Please
Wait ...
3. Slide on the baby unit to turn it on.ON/OFF
4. If the parent unit displays an image from the baby unit. Your baby
monitor is now ready for use.
Note:
• Make sure the baby t s t uni i a leas 3 feet awat y fro the parenmt
unit.
• If both unit are no connected t s ys Ls t , the paren uni dit pla No ink
for a few onds sec .
T ihen t di pla s s y Please Wait... and ashes.fl
Install the battery
You can power up the parent unit by connecting it to AC power or
to the recharge e battery provided. Even if the parent unit is abl
co ected to AC power, we reco end you a o inst l the nn mm ls al
battery. This guarantees continual operat n in c e of a power io as
outage.
Inst l the battery as shown below.al
1. With the l labe TH DIS SI E UP fac , abs oing up insert the small t f
the to he ts ba er intt y t slo inside the ba er tt y compartment. Make
sure the et lic contac i correctly oriented as own below. mal t s sh
P ush the ba erytt in ba erto he t tt y compartment un il lit it c cks
c y to se urel in place.
2. Align the batter co part n cover at agains the battery m me t flt y
co part nt then slide im me , t t ard the center o the parenow s f t unit
until it click in place. s to
Replace the battery
To replace the battery, press down on the large tab of the battery
and p l it out of the battery co part nt, then follow the steps ul m me
above to inst l the battery. al
Note:
• T the opera ing time for ing us the c re hargeable ba er istt y short. If
you t to t a we cwan moni or your baby for long time, re ommend y ou
conne hect t o AC . paren unit t t power
• If the parent t uni will no be edt us for lon a g time, di conne ands ct
o vremove the ba ertt y t pre ent po ible leakagess .
• Use onl the batter supplied th this product.y y wi
Connect and charge the battery
Note:
• Use onl he paren uni y t t t power adap ter and the baby uni power t
adapter th tsupplied wi hi produs ct.
• T he paren unit t power adap ter and baby uni power adapter are t
t o be c l tin ended t orrect y orien ed in a
vertical or oor fl mount
sit po ion. The prong are no designed hold hes t to t plug in place if it
i to a c ts plugged in eiling under-, he- able or cabine out t tlet.
• Make sure the parent unit, the baby unit and the power adapter
cord are out of reach of children.
Connect the baby unit
Connect the parent unit
Charge the parent unit battery
Once you have installed the parent unit and its battery, press and
hold to turn it on. The battery icon indicates the battery status
(see the Parent unit display icons table).
The standby e var s d e ing on the sensitivity level you set, timie ep nd
your actual use and the age of the battery.
When the parent unit is operating in battery mode and the battery is
low, you need to charge the parent unit without interruption for at
least 30 minutes to give the parent unit enough charge to use for a
short time. When operating in low battery condition, the parent unit
displays Battery low and . The parent unit plays short beeps to
alert you.
Note:
When you charge the battery initially or it is not used for a long
period of time, charge it for 12 hours continuously. It takes longer to
charge the battery when the parent unit is turned on. To shorten the
charging time, turn the parent unit off while charging.
Positioning the baby monitor
Place the parent unit within the operating range of the baby unit. We
recommend the parent unit is at least 3 feet away from the baby unit
to avoid audio feedback. If you still experience audio feedback,
move the parent unit and the baby unit farther apart.
Note:
For better image quality, do not place the baby unit too far away
from your baby.
Operating range
The operating range of the baby monitor is up to 250m outdoors or
50m indoors. The actual operating range may vary depending on
the environmental conditions and other interferences such as walls,
doors and other obstructions.
Overview
Baby unit overview
Parent unit overview
Parent unit lights
Parent unit di lay iconssp
Parent unit main menu icons
Parent unit display messages
Using the baby monitor
Adjusting speaker volume for parent unit
You can change the speak fro to , er volume m Volume 1 Volume 5
or turn it off.
When the speaker volu e is set to off, appears brie y and m fl
the light turns on.
To adjust the speaker volume:
1. Press when the parent unit is not in use.
2. Press , , or to adjust the speaker volu e.m
Adjusting speaker volume for baby unit
You can change the speaker volume.
To adjust the speaker volume:
Press or on the baby unit at any ti e.m
Adjusting display
LCD brightness
You can change the brightness of the parent unit screen from
Level 1 to Level 5.
To set the brightness of the parent unit screen:
1. Press MENU/OK when the parent unit is not in use.
2. Press or to choose , then press to select. DISPLAY
3. Press or to choose Brightness.
4. Press or to choose the desired level of brightness, then
press MENU/OK confirm your selection.
LCD contrast
You can change the contrast of the parent unit screen from Level 1
to Level 5.
To set the contrast of the parent unit screen:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to select.DISPLAY
3. Press or to choose Contrast.
4. Press or to choose the desired level of contrast, then press
to confirm you selection.
BABY LINK 700
Sound activation
- You can set the screen to be turned on
automatically whenever there are sounds
detected from the baby units when the parent unit
screen is turned off anually.m
Pair/unpair
- The baby units and parent unit provided are
already paired. You can add or replace baby units
(purchased separately) to your baby monitor
system.
Monitoring odem
You can choose to onitor in Single Baby unit, Split m
Baby unit or Patrol Mode if there are ore than one m
baby units in your syste .m
Language
You can select a language to be used in all screen
displays.
Display
- You can change the brightness of the parent unit
screen.
- ou can hange he t e parent uniY c t contras o hf t t
screen.
Alert tone
- You can set whether the parent unit beeps
whenever the parent unit operates in low battery
condition.
- You can set whether the parent unit beeps
whenever the link between the parent unit and the
baby unit is lost.
- You ay turn on the sound alert so that the m
parent unit beeps as soon as the baby unit
detects sounds which light up four sound level
indicators on the parent unit when the parent unit
volu e is turned off anually.m m
Te peraturem
- You can set the desired minimum room
temperature of the baby unit.
- a iYou can set the desired m x mum room
temperature of the baby unit.
- You can set whether the parent unit beeps
whenever the is out of the preset temperature
temperature range.
- You can set the scale of the baby temperature
unit.
Sensitivity
- You can use the parent unit to change the sound
sensitivity level of the baby units.
Battery low
Failed to connect
No Link
Pairing failed
Confirm to unpair?
Pairing completed
Unpairing
completed
When the parent unit is powered by
the rechargeable battery and the
battery level is low, it needs to be
recharged.
The parent unit fails to switch to the
ne t baby unit in Single Baby unit or x
Patrol Mode.
The selected baby unit slot is not
linked to the parent unit.
The selected baby unit cannot be
paired with the parent unit.
You try to unpair the baby unit(s). The
operation needs your con r ation.fi m
The selected baby unit has been
paired with the parent unit.
The selected baby unit(s) has been
unpaired with the parent unit.
Please Wait...
Temperature
too low
Temperature
too high
The link between the parent unit and
the selected baby unit is lost, or the
selected baby unit is out of range, or
the selected baby unit slot is e pty.m
When you have only one paired baby
unit and the link is lost, or you have
multiple paired baby units and the
links are lost.
The temperature detected from the
selected baby unit is below the set
minimum temperature.
The temperature detected from the
selected baby unit is above the set
maximum temperature.
270˚ rotatable camera head
Antenna
Temperature
sensor
ON/OFF
Camera
Light sensor
Microphone (Volume up)
(Volume down)
ON/OFF LED
light
On when strong signal strength is detected between
the parent unit and the selected baby unit.
Flashes when the parent unit cannot link to the
selected baby unit.
Off when the parent unit is turned off.
On when the paren uni ba ery t t tt is .being charged
Flashes when the parent unit battery is low and needs
charging.
Off when the parent unit battery is fully charged, or
when no battery is installed.
On when the parent unit is talking to the baby unit.
On w n the speaker volu e of the parent unit is he m
turned off.
Connection status
- displays when strong signal strength is
detected between the baby unit and the parent
unit.
- or d te signal strength isplays when modera
is detected between the baby unit and the
parent unit.
- displays when the link between the baby unit
and the parent unit is lost.
Current view status
- Displays the nu ber of the baby unit that is m
being viewed when in Single Baby unit.
- Displays the highlighted baby unit when in
Patrol Mode, if there are more than one baby
units in your system.
or or
or
25 oC
or
or
Zoom
- Displays when the c at the baby unit has amera
zoomed in.
T ture alertempera
- Displays when the t ture alert is set to on.empera
Real-t t tureime empera
- Displays the real-t t ture of the ime empera
selected baby unit.
Sound level indicators
-
Displays the sound level according to the scales
of loudness when there is sound t tted ransmi
from the baby unit.
Speaker v eolum
- Displays the speaker of the parent unit volume
is turned off.
Speaker v eolum
- Dis kplay hes t spea er volume le l while adjustingve .
Battery status
-
animates when the battery is charging.
- displays solid when the battery is fully
charged.
- displays when the battery is low and needs
charging.
- displays when no battery is installed but
operates using AC power, or the battery has
been installed incorrectly.
ATLINKS, 22 quai Gallieni 92150 Suresnes – France
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent
and used under license by ATLINKS.
USER'S GUIDE
PLEASE READ THIS USER'S GUIDE BEFORE USING YOUR BABY MONITOR
Connect the AC adapter
to an electrical outlet
230V/50 Hz
The bar keeps
scrolling until charging
is completed
Connect the AC adapter
to an electrical outlet
230V/50 Hz
PAIR
Threaded socket
Antenna
Microphone
(Left)
(Up)
(On/off)
(Right)
(Down)
Speaker
VOL
(Volume)
(Zoom) / BACK
(View)
ME /SELECTNU
TALK
select.
3. Press or choose Low Battery Tone.
4. Press or to choose or , then press On Off to confirm
your selection.
No link alert
You can set whether the parent unit beeps whenever the link
between the parent unit and the baby unit is lost.
To set the no link alert of the parent unit:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to ALERT TONE
select.
3. Press or choose No Link Alert.
4. Press or to choose or , then press On Off to confirm
your selection.
Sound Alert
W n the parent unit volu e is turned off u ly, you ay turn he m man al m
on the s nd alert so that the parent unit beeps as soon as the ou
baby unit d ects s nds which light up four s nd level i icators et ou ou nd
on the parent unit.
To set the nd alert of the baby unit:sou
1. Press when the parent unit is not in use.
2. Press or to choose , then press to ALERT TONE
select.
3. Press or choose Sound Alert.
4. Press or to choose or , then press On Off to confirm
your selection.
Monitor the temperature
Minimum temperature
You can set the desired minimum room temperature of the baby
unit. The minimum temperature can be set between 11°C (52°F)
and .20°C (69°F)
To set the minimum temperature of the baby unit:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to TEMPERATURE
select.
3. Press or choose , then press to select. Minimum
4. Press or to choose a desired baby unit or all baby units.
5. Press or to choose the d ired te perature, then press es m
to confirm your selection.
Maximum temperature
You can set the desired maximum room temperature of the baby
unit. The maximum temperature can be set between 21°C (70°F)
and .30°C (86°F)
To set the maximum temperature of the baby unit:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to TEMPERATURE
select.
3. Press or choose , then press to select. Maximum
4. Press or to choose a desired baby unit or all baby units.
5. Press or to choose the d ired te perature, then press es m
to confirm your selection.
Temperature alert
You can set whether the parent unit beeps whenever the
temperature is out of the preset temperature range.
To set the temperature alert of the baby unit:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to TEMPERATURE
select.
3. Press or choose , then press to select. Alert
4. Press or to choose a desired baby unit or all baby units.
5. Press or to choose or , then press On Off to confirm
your selection.
Temperature format
You can set the temperature scale of the baby unit.
To change the temperature scale:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to TEMPERATURE
select.
3. Press or choose . Format
4. Press or to choose or , then press ˚F ˚C to confirm
your selection.
Adjust the sound sensitivity
You can use the parent unit to change the sound sensitivity level of
the baby units from Level 1 Always On (Maximum) to . The higher
the sound sensitivity level is set, the more sensitive the baby unit is
in detecting sounds for transmitting to the parent unit.
Setting the language
You can select a language to be used in all screen displays.
To change the language:
1. Press when the parent unit is not in use.
2. Press or to choose LANGUE.
3. Press or to choose... desired language.
4. Press confirm your selection.
Monitoring mode
You can choose to monitor in Single Baby unit Split Baby unit , or
Patrol Mode if there are more than one baby units in your system.
To change the monitoring mode:
1. Press when the parent unit is not in use.
2. Press or to choose , then press MONITORING MODE
to select.
3. Press or to choose , or Single Baby unit Split Baby unit
Patrol Mode.
• Single Baby unit - Press or to choose a desired baby
unit. The parent unit only displays image of one baby unit. You
may change to view images from different baby units by
pressing in this mode.
• - The parent unit displays multiple baby unit Split Baby unit
images in a maximum of four in one screen.
• - The parent unit patrols to display images from Patrol Mode
different baby units in every 7 seconds. You may change to
view images from different baby units even though the scanning
period is not expired by pressing in this mode.
4. Press confirm your selection.
Note:
Monitoring mode is not applicable when there is only one baby unit.
View
You can change the screen to view images from different baby
units, if there are more than one baby units in your system.
To view different baby units while in Single Baby unit:
Press repeatedly to enlarge and switch to the desired baby
unit. The switching is in chronological order: to Baby unit 1 Baby
unit 4.
To view different baby units while in Split Baby unit:
Press repeatedly to enlarge and switch to the desired baby
unit. The switching is in chronological order: to Baby unit 1 Baby
unit 4.
The a while. Split Baby unit mode resumes after
To view different baby units while in Patrol mode:
Press repeatedly to switch to the desired baby unit even if the
scanning period on a particular baby unit is not expired. The
switching is in chr to
onological order: Baby unit 1Baby unit 4.
Note:
If the switching fails, the screen displays . Try Failed to connect
the switching again.
Zoom
You can zoom in or out while viewing image from baby unit in
Single Baby unit and Patrol mode.
To zoom in or out:
Press to zoom in. Press , , or to move the zoomed
image upward, downward, leftward or rightward correspondingly.
Press again to zoom out.
Note:
In Split Baby unit, is not available.
Talk to the baby unit
You can broadcast messages from the parent unit to any one of the
baby units.
To talk to the baby unit:
Press and hold when the parent unit is in or Single Baby unit
viewing particular baby unit in . Speak towards the Patrol Mode
microphone on the parent unit. The TALK light is on when the
voice connection to the baby unit is made. Your voice is broadcast
to the baby unit. Release the key to stop the broadcast.
Note:
The feature does not work in Split Baby unit.
Night vision
To help you monitor your baby even at night, the baby unit
automatically uses the light from its infrared LEDs for transmitting
images to the parent unit when it is turned on in a dark room.
However, it only transmits black-and-white images.
Set the alert tone
Low battery tone alert
You can set whether the parent unit beeps whenever the parent
unit operates in low battery condition.
To set the low battery tone alert:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to ALERT TONE
If you want the baby unit to be very sensitive in detecting sounds,
you may set the sensitivity level to Always On (Maximum), so that
the baby unit will always detect any sounds including background
noises for transmitting to the parent unit. If you want the baby unit
to be less sensitive level to a lower level ( to ), so Level 1 Level 4
that the baby unit will transmit sounds to the parent unit only when
your baby is very noisy or crying loudly.
To set the sound sensitivity level of the baby unit:
1. Press when the parent unit is not in use.
2. Press or to choose , then press to SENSIT IT YIV
select.
3. Press or to choose a desired baby unit or all baby units.
4. Press or to choose the d ired sensitivity level, then press es
to confirm your selection.
VOX sound activation
When the parent unit screen is turned off manually, you can set the
screen to be turned on automatically whenever there are sounds
detected from the baby units. The parent unit screen will turn off
automatically when no sounds are detected from the baby units
within 50 seconds.
To turn the sound activation on or off:
1. Press when the parent unit is not in use.
2. Press or to choose SO D ACTIVATIONUN .
3. Press or to choose or , then press to On Off
confirm your selection.
Note:
If you set the sensit ity level to Always On (Ma i u ) the babiv x m m , y
uni will be very sensitive and d ec any sound incl ing t et t s ud
background ises These background ise ano . no s my t disrup the
silence and prevent the sound activat n feature to work properly. io
Pair d unpair the baby unitan
Pair new by unitba
The baby units and parent unit provided are already paired. You
can add or replace baby units (purchased separately) to your baby
monitor system.
You can pair a maximum of four baby units to your parent unit.
Each new baby unit ust be paired to the parent unit before use.m
Make sure you power on the baby unit and the parent unit before
pairing.
To pair a baby unit:
1. On the le parent unit, pressid .
2. Press or to choose , then press to
PAIR/UNPAIR
select.
3. Press or choose , then press to
Pair Baby unit
select.
4. Press or to choose a desired baby unit then press
slot,
.
5. Make sure the new baby unit is turned on. On the new baby unit,
immediately press and hold when the parent unit screen
displays Press and hold on Baby Unit to start Pairing .
Parent unit screen displays Pairing...Please Wait . .. and emits
beep sound every two seconds. The LED light on the new baby
unit flashes quickly.
6. When pairing is successful, the screen displays Pairing
c letedomp . You hear a con r at n tone. The LED light on thfi m io e
new baby unit turns een. The parent unit returns to the gr
previous nu. me
Note:
• If pairing ails f , the creen s displa s y Pair g edin fail . Try he t pairing
c .pro es agains
• During registrat nio , you amy press / cancel theto
registrat n when paren unit screen displayio t s Pairing / ...
Please W t .ai ..
• O nl oney baby uni an be pairedt c at a . time
Unpair by unitba
Make sure you power on the baby unit and the parent unit before
unpairing the baby unit.
To unpair a baby unit:
1. On the le parent unit, pressid .
2. Press or to choose , then press to
PAIR/UNPAIR
select.
3. Press or choose , then press to Unpair Baby unit
select.
4. Press or to choose a desired baby unit or l baby units, al
then press .
5. When the screen displays , press . Co rm to unpair?nfi
6. When unpairing is successful, the screen displays Unpairing
c letedomp . The LED light on the selected baby unit as s flhe
owly.Then, the parent unit returns to the pre ous enu. sl vi m
TECHNICAL DETAILS
* Values may vary according to environment.
** Depending on initial battery charge.
TROUBLESHOOTING
If the connection between the Parents unit and Baby unit is
interrupted:
- Check the power supply of the baby unit is plugged in and on.
- Make sure both units are switched on.
- Check that the batteries are charged and properly installed in the
Parents unit.
- Make sure the Parents unit and Baby unit are within range of
each other.
(under ideal conditions, the range is 250 meters away and 50
meters indoors)
Generally, in case of problems, disconnect the power sector. Wait
about 30 minutes before reconnecting power supplies.
Wipe the parents unit with a damp cloth.
SAFETY
Do not open the device or its AC adapter in order not to constitute a
risk of electric shock.
Your Baby Monitor must be installed in a dry place, away from
heat, moisture and direct sunlight. To avoid radio interference, keep
your baby-monitoring at least 1 meter any electrical appliance.
ENVIRONMENT
This symbol means that your inoperative electronic
appliance must be collected separately and not mixed with
household waste.
To this end, the European Union has implemented a specific
collection and recycling system for which manufacturers are
responsible.
Help us protect the environment in which we live!
CONFORMITY
The logo printed on the unit certifies that it meets the essential
requirements and all relevant directives. You can see this
declaration of conformity on our website: www.alcatel-home.com
Alcatel logo and Alcatel name are trademarks of Alcatel Lucent and
used under license by ATLINKS.
Up to 50 Metres*Indoor Range
Up to 250 Metres*Outdoor to Free Field
i) Silence from baby: 9 hrs**
ii) 75% silence 25% monitoring: 6 hrs
video monitoring
(under nomral video monitoring)**
Active Monitoring time
2.8” Color LCD (QVGA 320x240 pixel)LCD
Model No.: SCD530-1
Lithium POLYMER 3.7V / 950mAh
Only use the battery supplied with
Baby Link 700
Use any other type of battery present
a risk of explosion.
Used battery must be disposed of in
compliance with current
environmental protection regulations.
Battery for Parent Unit
Parent unit:
Model No.: R018962V-V
Input: AC100-240V 50/60Hz
Output: DC6V / 800mA
Baby unit:
Model No.: R019995V-V
Input: AC100-240V 50/60Hz
Output: DC6V / 1000mA
Only use the adaptors supplied with
Baby Link 700
Single-phase AC, excluding IT
installations defined by the EN60950
standard.
Caution: The network voltage is
classified as a hazard by the criteria
of this standard.
Parent Unit and Baby
Unit Power Adaptor
Model : Baby Link 700 EU
A/W Np.: 10000940 Rev.0 (EN)
Made in PRC
© ATLINKS 2013 - Reproduction prohibited.
The Manufacturer reserves the right to modify
the specifications of its products in order to
make technical improvements or comply with
new regulations.
www.alcatel-home.com
Product specificaties
| Merk: | Alcatel |
| Categorie: | Babyfoon |
| Model: | Baby Link 700 |
Heb je hulp nodig?
Als je hulp nodig hebt met Alcatel Baby Link 700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Babyfoon Alcatel
5 November 2023
27 April 2023
24 April 2023
10 Februari 2023
2 Februari 2023
7 Januari 2023
25 November 2022
Handleiding Babyfoon
- Babyfoon Philips
- Babyfoon IKEA
- Babyfoon Brondi
- Babyfoon Fysic
- Babyfoon Grundig
- Babyfoon Gigaset
- Babyfoon Motorola
- Babyfoon Medion
- Babyfoon Tefal
- Babyfoon Topcom
- Babyfoon VTech
- Babyfoon Albrecht
- Babyfoon Alecto
- Babyfoon Amplicomms
- Babyfoon Angelcare
- Babyfoon Ansmann
- Babyfoon Ariete
- Babyfoon Audioline
- Babyfoon Babyfon
- Babyfoon Babymoov
- Babyfoon BabySafe
- Babyfoon Basetech
- Babyfoon Beaba
- Babyfoon Bebetel
- Babyfoon Beurer
- Babyfoon Binatone
- Babyfoon BT
- Babyfoon D-Link
- Babyfoon Denver
- Babyfoon Duronic
- Babyfoon Duux
- Babyfoon Elro
- Babyfoon Esscom
- Babyfoon Eufy
- Babyfoon Ezviz
- Babyfoon Fischer Price
- Babyfoon Fisher Price
- Babyfoon Foscam
- Babyfoon Geemarc
- Babyfoon Goclever
- Babyfoon Graco
- Babyfoon Grixx
- Babyfoon Hama
- Babyfoon Hartig Helling
- Babyfoon HQ
- Babyfoon Hyundai
- Babyfoon Kodak
- Babyfoon Kogan
- Babyfoon Konig
- Babyfoon Lanaform
- Babyfoon Lorex
- Babyfoon Lupilu
- Babyfoon Luvion
- Babyfoon Manhattan
- Babyfoon ME
- Babyfoon Medisana
- Babyfoon MicroTalk
- Babyfoon Modern-Electronics
- Babyfoon Nedis
- Babyfoon Nova
- Babyfoon Pabobo
- Babyfoon Philips-Avent
- Babyfoon Reer
- Babyfoon Safety 1st
- Babyfoon Sanitas
- Babyfoon Silvercrest
- Babyfoon Stabo
- Babyfoon Swissvoice
- Babyfoon Switel
- Babyfoon Technaxx
- Babyfoon Terraillon
- Babyfoon Tesla
- Babyfoon Tommee Tippee
- Babyfoon Tomy
- Babyfoon Trebs
- Babyfoon Trendnet
- Babyfoon Tristar
- Babyfoon Truelife
- Babyfoon Uniden
- Babyfoon Withings
- Babyfoon Jablotron
- Babyfoon Jane
- Babyfoon Olympia
- Babyfoon Oregon Scientific
- Babyfoon Oretti
- Babyfoon Overmax
- Babyfoon Concept
- Babyfoon Niceboy
- Babyfoon Lionelo
- Babyfoon Cobra
- Babyfoon EMOS
- Babyfoon Chicco
- Babyfoon Cresta
- Babyfoon SereneLife
- Babyfoon M-e
- Babyfoon Hartig And Helling
- Babyfoon NUK
- Babyfoon Oricom
- Babyfoon Summer
- Babyfoon Tigex
- Babyfoon Lindam
- Babyfoon BabyOno
- Babyfoon Neno
- Babyfoon Xblitz
- Babyfoon IBaby
- Babyfoon Levana
- Babyfoon Mobi
- Babyfoon Neonate
- Babyfoon Chipolino
- Babyfoon Babysense
- Babyfoon Heimvision
- Babyfoon Summer Infant
- Babyfoon LeamsiQ
- Babyfoon Chillax Baby
- Babyfoon Hubble Connected
- Babyfoon Peekyboo
Nieuwste handleidingen voor Babyfoon
14 November 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
10 December 2024
4 December 2024
23 November 2024