Xvive PX Handleiding

Xvive Niet gecategoriseerd PX

Lees hieronder de 📖 handleiding in het Nederlandse voor Xvive PX (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
● 3-channel mixer and headphone amplier for personal in-ear-monitoring applications
● Ultra-compact and lightweight design
● Cat 5 cable transmits three channels of audio and 9 volts of Power over
Ethernet (PoE)
● Three balanced female XLR plugs connect to your mixing console or other
audio devices
● Level control knob powers o the unit all the way counterclockwise
● Three balanced XLR to unbalanced 1/4” adapters included
● DIP switches inside PX allow you to control how each channel is panned: left,
right, or both
● PoE/battery power switch selects either Cat 5 9V PoE power or 2x AAA battery
power
● Runs for up to 5 hours on 2 AAA batteries (not included)
● LED indicates when battery power is being used
● Sturdy beltpack clip
● Ultra-rugged impact-resistant metal chassis
● Ethernet cable can simultaneously transmit audio and power over a distance of
up to 200 ft
As a musician and/or singer, whether you’re performing live, rehearsing with a
band or recording in a studio, you need to hear both yourself and the other
musicians. But just as importantly, you need to have control over what you hear.
Everyone hears dierently from their own perspective, so everyone needs to
have control over their own mix.
Ideally, you’d have a monitor engineer—but in most situations it’s likely that you
or another band member are controlling the monitor mix from the stage. Or a
sound technician at the other end of the room has the control; but it’s hard to
communicate with them during a show. Instead of having a xed monitor mix
from the board, PX allows you to set up a simple three-channel monitor mix that
allows you to adjust the levels that matter to you the most—on the y. For
example, one knob could control your vocal level, one could control your
instrument level, and another could be a submix of other vocals and instruments.
With the PX system, control of that balance is always within reach, and always
adjusted perfectly to your liking!
FEATURES
NO SOUND
• Check that the audio source is connected to PX-B and sending signal
• Check that the EC25 cable is connected to PX-A and PX-B
• Check that input 1, 2, and 3 volume controls on PX-A are not turned all the way down
• Check that the main volume knob / power switch is turned on
• Check that earphones/headphones are properly connected
• Check that left and right channel switches in the battery case are not all set to
the o position
NO POWER
• Check that the PX-A power switch (/volume knob) is turned on
• Check that the power mode switch is correctly set to PoE or AAA battery
• Check that the batteries have been installed correctly
• Check to make sure that the PoE power adapter used is 9V/2A DC center-negative
• Check that the EC25 cable is in working order and connected properly
TROUBLESHOOTING
PRODUCT OVERVIEW
PORTABLE 3-CHANNEL
PERSONAL MIXER
For personal IEM/headphone mixes
for live and recording
COMPLETE PX SYSTEM
SPECIFICATIONS
Input type:
Input impedance:
Output type:
Output impedance:
Max. output:
Power input:
Battery life:
Current:
Ethernet cable length:
PoE power requirement:
Balanced XLR
13.3 kΩ
1/8” TRS (stereo)
8-80 Ω
2x 150 mW @ 16 Ω
PoE (Power over Ethernet) or 2x AAA batteries
~5 hours
~210 mA
25 feet / 7.6 m
9V/2A center-negative (powers up to 5 PX-A units)
9V / 500mA center-negative for one PX-A unit
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT
HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
Overexposure to excessive sound levels can damage your ears, resulting in
permanent noise-induced hearing loss. Do not use earphones for a long time and
set the volume below 50%.
Xvive accepts no liability for any loss which may be suered by any person who
relies either wholly or in part upon any description, photograph, or statement
contained herein. Technical specications, appearances and other information
are subject to change without notice.
LIMITED WARRANTY
LEGAL DISCLAIMER
For the applicable warranty terms and conditions and additional information
regarding the Xvive Limited Warranty, please email support@xvive.com.
WARNING
Input 1 Volume
Ethernet input
Input 2 Volume
Input 3 Volume
Power LED
PoE mode: solid on
Battery mode:
100% - 20% charged: Blue LED
20% - 10% charged: Pink LED
10% - 0% charged: Red LED
(When the LED is red, the batteries should be replaced)
Stereo setup DIP switches
L switch ON = audio is sent to the left earphone
R switch ON = audio is sent to the right earphone
L and R both ON = audio is sent to left and right sides
Earphone/headphone output
Earphone/headphone volume
PoE / battery
power switch
Battery compartment
and stereo setup
DIP switches
Ethernet output
Balanced XLR 1
Balanced XLR 2
9V DC center-negative
power input
Balanced XLR 3
Includes 3 balanced-XLR-to-¼”-unbalanced-TS adapters
PX-B
CH1
ON ON ON
L R L R L R
CH2 CH3
PX-A
PX
DISTORTED AUDIO
• Check if the master volume is too high
• Check the levels going in and out of the PX-A mixer
• Verify that each signal is not distorted at the audio source
• Low batteries can cause distortion. Check batteries and replace if necessary.
LOW AUDIO LEVEL FROM THE PXA EARPHONE OUTPUT
• Check the PX-A master volume (earphone/headphone output) level
• Check CH1, CH2, CH3 volume levels
• Check output levels from audio sources (e.g. mixing console aux outs)
MULTIPLE CONNECTIONS WITH PXH
• The PX-B signal can be sent to up to ve PX-A units via the PX-H Hub, to be
heard simultaneously by up to ve people. You can also stack multiple PX-H
units to build a larger system for more than 5 people.
XLR to ¼” TS
Adapter x 3
EC25PX-BPX-A
CH3 CH1 CH4
CH2
T568B
Orange+
White
Orange
Green
Brown+White
Brown
Green+White
Blue
Blue+White
ETHERNET INPUT
CH 1 is input 1 XLR hot and XLR cold Blue Blue+White
, ,
CH 2 is input 3 XLR hot and XLR cold Green Green+White, ,
CH 3 is input 2 XLR hot and XLR cold Orange Orange+White, ,
CH 4 is PoE power input, Brown (+), Brown+White (-)
QUICK START GUIDE
My vocal Input 1
Input 2
Input 3
Keys and
guitar
Blend of
other vocals
DC Power
Headphones
Earphones / IEMs
1. Basic setup for a singer 2. Setup for two singers/instrumentalists
3. Setup for a whole band 4. Recording in a studio
1. Connect audio sources 2. Connect ethernet cable
3. Connect to power, using a 9V power supply or two AAA batteries
(9V power adapter not included))
4. Set input 1, input 2 and input 3 volumes to 12 o’clock
6. Wearing earphones/headphones, turn on the power and slowly adjust
the PX-A master volume to the appropriate level. Then, adjust the
volume of each channel at the source/s (e.g. aux output levels on the
soundboard) to achieve a good starting mix. During performance,
adjust channel volumes and master volume on the PX-A as needed.
5. Set the panning of your three channels as desired: left,
right or center
Input 1:
Direct channel output: lead vocal
Input 2:
AUX 1: backing vocals
Input 3:
AUX 2: keys, bass, guitar
Input 1:
Direct channel output: backing vocal
Input 2:
AUX 3: lead and other backing vocals
Input 3:
AUX 4: guitar (louder), keys, bass
APPLICATION EXAMPLES
VOCAL BOOTH
CONTROL ROOM
Computer/DAW PX-B
PX-A
Audio
Interface
Input 1
Input 2
Input 3
PX-H Hub
2nd oor, Building 12, Xicheng Industrial Area, Xixiang Town,
Baoan District, Shenzhen Guangdong China. 518101
XVIVE CUSTOMER SERVICE
Email: support@xvive.com
Or, you can nd your local distributor at www.xvive.com
SHENZHEN FZONE TECHNOLOGY CO., LTD.
Ethernet cable
Mixers
Recorders
Metronome
(Headphone / Line output)
DC Power
9V / 2A
2 AAA
0dB
120
0dB
0dB
L R L R L R
L
CH1 CH2 CH3
R
ON ON ON
LRLR
OR
Headphones
Earphones / IEMs
VOCALIST
DRUMMER
DC Power
Click Track Kick Drum Instruments
Vocal Other Vocals Instruments
Input 3Input 2Input 1
DRUMMER
EXAMPLE #1
EXAMPLE #2
DC Power
Direct Out
(Kick Drum)
Direct Out
(Kick Drum)
AUX 1 (Bass,
Guitar, Keys)
AUX 1
(Backing Track)
AUX 2
(Click Track)
AUX 2
(Click Track)
Input 3Input 2Input 1
PERFORMER 1 (LEAD SINGER)
PERFORMER 2 (BACKUP
VOCALIST/GUITARIST)
KEYBOARDIST
Headphones
Earphones / IEMs
Headphones
Earphones / IEMs
EXAMPLE #1
EXAMPLE #2
DC Power
Direct Out
(Main Keyboard)
AUX 1
(All Keyboards)
AUX 1
(Bass, Guitar)
AUX 2
(Bass, Guitar)
AUX 2
(All Keyboards)
AUX 3
(Backing Tracks)
Input 3Input 2Input 1
Example:

Product specificaties

Merk: Xvive
Categorie: Niet gecategoriseerd
Model: PX

Heb je hulp nodig?

Als je hulp nodig hebt met Xvive PX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Xvive

Xvive

Xvive A58 Handleiding

22 Augustus 2024
Xvive

Xvive PX Handleiding

2 Juli 2024
Xvive

Xvive U3D Handleiding

2 Juli 2024
Xvive

Xvive U5 Handleiding

2 Juli 2024
Xvive

Xvive G1 Handleiding

9 Juni 2024
Xvive

Xvive V19 Micro Power Handleiding

8 Juli 2023
Xvive

Xvive U2T Handleiding

26 Juni 2023
Xvive

Xvive U4T Handleiding

25 Juni 2023
Xvive

Xvive U3C Set Handleiding

13 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Moen

Moen STo S72308 Handleiding

18 December 2024
Moen

Moen STo S62308 Handleiding

18 December 2024
Asus

Asus H610I-IM-A Handleiding

18 December 2024
Asus

Asus R680EA-IM-A Handleiding

18 December 2024
Asus

Asus EBS-A700 Handleiding

18 December 2024
Asus

Asus PE3000G Handleiding

18 December 2024
Asus

Asus Tinker Board S R2.0 Handleiding

18 December 2024
Asus

Asus EBS-A710 Handleiding

18 December 2024
Asus

Asus Q370I-IM-A R3.0 Handleiding

18 December 2024
Asus

Asus H610T-EM-A Handleiding

18 December 2024