Xvive G1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Xvive G1 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Silicone platform will not
leave marks or scratches
on instruments
Wide cradle for
enhanced guitar support
Supports almost any
electric, acoustic or bass
guitar
Perforations drastically
reduce weight and increase
portabilityNon-slip silicone base
Rugged metal
construction Stand folds for easy
storage and
transport
Four points of contact
with the oor make
the stand untippable
The G1 Buttery Guitar Stand was meticulously engineered to hold your guitar upright, safely and reliably, on-stage, in a studio or at home.
When not in use, it folds into itself, compressing into a super-compact and ultra-light accessory for easy transport and storage.
Thanks to its sturdy aluminum frame and four points of contact with the oor, the G1 oers rock-solid support for virtually any type of
electric, acoustic or bass guitar. Your instrument should be untippable—and now it can be!
Swing the “wings” of the stand around to the front, until the magnets on each side click together in the middle of the stand. Then, turn the
rear support piece (underneath the “tail” of the stand) clockwise 90 degrees to stabilize the ack of the stand. You now have an ultra-stable b
four-legged stand to support and defend your guitar!
When the “wings” of the G1 Buttery Guitar Stand are opened and folded back,
the stand becomes compact enough to store and carry in the back pocket of
your guitar bag. To close the G1, rst turn the rear support leg 90 degrees
counter-clockwise so that it’s in-line with the backside of the stand. Then, open
the wings so that the magnet in the center clicks open, and fold the two wings
back and around the “tail” of the stand.
SHENZHEN FZONE TECHNOLOGY CO., LTD.
2nd oor, Building 12, Xicheng Industrial Area, Xixiang Town,
Baoan District, Shenzhen Guangdong China. 518101
Made In China
www.xvive.com
1. Open the “wings” of the stand from the back to the front 2. The magnet in the center holds the wings together
3. Rotate the rear support piece 90 degrees clockwise 4. Setup is complete
* To collapse the stand for storage/transport, reverse the order of these instructions
Folded dimensions (W x D x H):
337 mm x 62 mm x 255 mm
Open dimensions (W x D x H):
420 mm x 325 mm x 262 mm
Weight: 796 g
Material: Aluminum alloy / Rubber
G1
BUTTERFLY
GUITAR STAND
FOLDED UP OPEN
337 mm
255 mm
62 mm
262 mm
380 mm
325 mm
260 mm
173 mm
86 mm
420 mm
85 mm
HOW TO SET UP THE STAND
TO SET UP THE STAND FROM ITS FOLDED STATE
SPECIFICATIONS
TO PREPARE THE STAND FOR STORAGE OR TRANSPORT
Magnet
Rubber is safe for most but not all
nitrocellulose lacquer nishes.
When opening or closing the G1, to avoid pinching your
ngers, do not place your ngers near the rotating shaft
(as shown in the graphic). Children should only operate
and use the stand with the guidance of an adult.
料号:111081398 G1 说明书 尺寸:148*210mm 材质:80g书纸正反双面印
Designed in Germany


Product specificaties

Merk: Xvive
Categorie: Niet gecategoriseerd
Model: G1

Heb je hulp nodig?

Als je hulp nodig hebt met Xvive G1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Xvive

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd