WyreStorm AMP-001-010 Handleiding

WyreStorm Receiver AMP-001-010

Lees hieronder de 📖 handleiding in het Nederlandse voor WyreStorm AMP-001-010 (32 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 1

Instruction Manual

Thank you for choosing this WyreStorm product.

Please read these instructions carefully before installing to avoid complications later.

Wyrestorm HDBaseTTM Class D Digital Audio Amplier / Receiver / Repeater

Part Number AMP-001-010

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343

Contents

1. Introduction

CONTENTS AND INTRODUCTION

AMP-001-010 Wyrestorm HDBaseTTM Class D Digital

Audio Amplier / Receiver / Extender

The Wyrestorm AMP-001-010 is a unique HDBaseT

Class D digital audio amplier with receiving and repeating

functionality that fundamentally changes the way to approach

the design of multi-room audio-visual systems.

Fully cascadable (daisy-chained) over multiple 70m/230ft

distances up to 7 times using a single Cat5e cable to create

larger distributions. It also offers HDMI/HDBaseT reception

and pass-thru, 2.1 audio amplication with subwoofer and

stereo preouts for connection to an AVR and HDMI breakout

with bidirectional control of source/display from either

location via IR/RS232.... and so much more.

Feature rich and highly versatile, the AMP simplies,

combines and improves the relationship between HDMI,

HDBaseT and stereo audio for integrators by incorporating

3:1 audio switching from centralized AV sources and ARC or

local audio input.

Introduction

Features

Safety Precautions

Package Contents

Panel Descriptions

i. Front

ii. Rear

EDID Management

i. About EDID

ii. Before EDID adjustment

iii. EDID Pre-sets

RS232 Application Scenarios

i. Understanding RS232 Connection & Signals

ii. Zonal IR for Cascading Multiple Independently

Controlled AMP units

iii. Global IR for Cascading Multiple Collectively controlled

AMP units

iv. Hybrid IR for combination of Zonal and Global IR

control of multiple AMP units

v. RS232 Addressing

vi. Routable RS232 with Wyrestorm POH-enabled

HDBaseT Matrices - MX-PP-POH

vii. Residential RS232 HDBaseT Addressing example

viii. Example system topology showing multiple, dierently

addressed amps.

ix. Commercial RS232 HDBaseT Addressing example

Specications

Basic Operation

Remote Control Handset Operation

Application Scenarios and installation benets

i. Basic Centralized Source

ii. Extended Centralized Source

iii. Basic Matrix

iv. Extended Matrix

v. AMP-001-010 as Display Receiver

vi. AMP-001-010 as In-line Solution

vii. Central Conguration

Onscreen User Interface

Connection and Operation

i. Cabling Guide

ii. RJ45 Termination

iii. Initial Connection

iv. IR/RS232 Control Connection

v. Optional Device Connection

- Personal Device Audio Input

- Speaker Connection

- Subwoofer

- External Power Amplier

- Supported Speaker Types

vi. Interface Device

Maintenance

FAQ’s

Troubleshooting

Provided Service

Mail In Service

Installation Notes

Warranty

i. Warranty Limits and Exclusions

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 3

FEATURES AND SAFETY PRECAUTIONS

Employing a switching topology, the low voltage, energy

efcient digital Class D amplication delivers power to the

speaker load exclusively with very little power wasted in

operation. This increase in efciency has the main benet

of lowering heat dissipation and reducing the size of the

amplier assembly. If properly executed, most D-class

ampliers typically have a much smaller form factor and a

lower BOM cost than comparable Class-A/AB/B units.

In terms of installation, it can be used locally in-room as a

display device, remotely in-rack or centrally at any point in-

line for one of the most exible and powerful applications of

HDBaseT technology to date.

The AMP-001-010 is the rst product of its kind and

represents Wyrestorm’s innate understanding and

appreciation of the AV installation by continually pushing the

boundaries of what is possible to offer innovative products

that add great value to any residential or commercial

application, whatever the size or budget.

www.wyrestorm.com

2. Features

• Combined HDBaseT Repeater, Receiver and Class D Amplier – all in

one.

• Compact and easy to install & use with single Cat5e/6 cabling –

applies the same basic integration principles for residential, light or

major commercial projects.

• Flexible and versatile – multitudes of application scenarios from basic

extender to complex volume digital AV distribution installed at any

point during a cable run.

• HDBaseT Input and pass-thru with HDBaseT Output.

• 3:1 Audio Switcher/Receiver – Audio from centralized source via

HDBaseT Transmitter or Matrix Device, Audio Return Channel (ARC)

or Local Audio Input via 3.5mm.

• AMP used centrally with AV source, In-line near speakers, wall

mounted near data connections or locally at display location.

• 70m/230ft transmission distance between device and AMP > then

another 70m/230ft to next AMP.

• Fully cascadable up to 7 times from single transmitting device (Matrix

or HDBaseT transmitter).

• HDMI output for direct connection of HD display either in-line to each

AMP connected or at the end of the run.

• 2.1 stereo audio at 25w per channel - amplier capability to drive

4, 6 & 8 Ohm speaker loads.

• High quality preamplier adjustment for tone/volume/sub/mute

control.

• Variable Analog line level outputs.

• Analog (RCA) Subwoofer output.

• Stereo speaker amplied outputs with left/right spring terminal

connections.

• Bidirectional control of source and display via IR or RS232 (IR control

signal passed within HDMI transmission).

• Options range from basic control of devices using IR TX and RX ports

to fully integrated control via leading control systems using RS232.

• Commands (Tx, Rx, Gnd) sent with HD Audio & V ideo contained

within a single Cat5e/6

• AMPs addressable via RS23 • RS232 Port for rmware update or

RS232 control signal transmission.

• EDID management and pre-sets via DIP switch.

• LED indication – power status, audio source selection (HDBaseT,

Local or ARC).

• HDMI v1.4 features supported.

• HDCP compliant.

• Internal ESD protection.

• Compact size for exible integration location.

• Mounting brackets supplied.

Part Number AMP-001-010

3. Safety Precautions

1. Do not expose this apparatus to rain, moisture,

sprays, drips or splashes and ensure that no

objects containing liquids are placed on the

apparatus, including cups, glasses and vases.

2. Do not place this unit in a conned space such as

enclosed shelving, cabinets or bookshelves.

Ensure the unit is adequately ventilated.

3. To prevent the risk of electric shock or re hazard

due to overheating, do not cover the unit or

obstruct ventilation openings with material,

newspaper, cardboard or anything that may restrict

airow into the unit.

4. Do not install near external heat sources such as

radiators, heat registers, boilers or any device that

produces heat such as ampliers or computers and

do not place near sources of naked ame.

5. Unplug apparatus from power supply during

lightening storms or when unused for long periods

of time.

6. Protect the power cable from being walked on,

pinched or restricted in any way, especially at plug

connections.

7. Only use attachments/accessories specied by the

manufacturer.

8. Units contain non-servicable parts - Refer all

servicing to qualied service personnel.

WARNING

To reduce the risk of re, electric shock

or product damage:

• Simplied ports Input: HDMI Output: integrated RJ45

connectors for a single Cat5e/6/7 UTP cable to each display

point for ease of installation.

USB to 5V Cable

CAB-USB-5V

Product specificaties

Merk:	WyreStorm
Categorie:	Receiver
Model:	AMP-001-010
Kleur van het product:	Zwart
Gewicht:	680 g
Breedte:	202 mm
Diepte:	178 mm
Hoogte:	31 mm
LED-indicatoren:	Ja
Gebruiksaanwijzing:	Ja
Connectiviteitstechnologie:	Bedraad
Aansluiting voor netstroomadapter:	Ja
Audio (L,R) out:	1
Ingebouwde audio decoders:	DTS-HD Master Audio, Dolby TrueHD
Video-ingang:	HDMI
Audio-uitgangskanalen:	2.1 kanalen
Signaal/ruis-verhouding:	- dB
Maximale afstand:	70 m
Totale harmonische vervorming (THD):	- procent
Video uit:	HDMI
Stroomverbruik (typisch):	45 W
Bedrijfstemperatuur (T-T):	-5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Piekvermogen per kanaal:	- W
Maximum input level:	1 V