Whynter KS-1100 Handleiding

Whynter Keukenweegschaal KS-1100

Lees hieronder de 📖 handleiding in het Nederlandse voor Whynter KS-1100 (6 pagina's) in de categorie Keukenweegschaal. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
WHYNTER Digital Wall Kitchen Scale
MODEL: KS-1100
Please read this instruction booklet completely before operating.
SPECIFICATIONS
Equipped with a high precision strain gauge sensor system
Capacity: 2kgx1g
Auto off & Manual off
Tare function
Over load / Low battery indicator
Electronic clock, countdown timer with alarm
POWER SUPPLY
1 x 3V CR2032 lithium battery (included)
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace the battery with a new one.
ASSEMBLE AND INSTALL THE SCALE TO THE WALL
(Please choose a smooth and flat wall surface to install the scale.)
STEP 1: Use the paper card as reference to drill 4 holes on the wall. (Make sure that the
reference card is horizontal)
STEP 2: Drill in the screw knots(plug) into the 4 holes
STEP 3: Install the fixture plates to the holes and drill in the screws tightly to secure the
plates.
STEP 4: Pull the insulating tape out of the battery cover of the scale.
STEP 5: Insert the scale to the fixture plates and press downwards then push to the right.
OPERATION
STEP 1: Pull down the glass platform of the scale.
STEP 2: Press the “ON/TARE” button and the scale will display “HELO”, and then zero.
The scale is now ready for weighing.
STEP 3: Put the food / ingredient on the glass platform, the weight will appear on the
display.
STEP 4: After use, press the “MODE” button, the system return to clock mode.
STEP 5: Push glass platform upwards when not in use.
TARE FUNCTION
STEP 1: In the weighing mode, put the container on the glass platform, the display will
show the weight of container.
STEP 2: Press the “ON/TARE” button again, the display will show zero. Put the food/
ingredient into the container, the weight of the food/ ingredient will appear on the display.
TIME SETTING
Press the “MODE” button for a few seconds to turn on the time setting function.
Minute will flash on the display.
Press the “UNIT” button to setup the minute.
Press the “MODE” button again, hour will flash on the display.
Press the “UNIT” button to setup the hour.
After finish setting the time, press the “MODE” button to exit Time Setting.

Product specificaties

Merk: Whynter
Categorie: Keukenweegschaal
Model: KS-1100

Heb je hulp nodig?

Als je hulp nodig hebt met Whynter KS-1100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Keukenweegschaal Whynter

Whynter

Whynter KS-1100 Handleiding

8 Februari 2024

Handleiding Keukenweegschaal

Nieuwste handleidingen voor Keukenweegschaal

Salter

Salter 1074 Handleiding

20 November 2024
Salter

Salter 1064 WHDR Handleiding

20 November 2024
Taylor

Taylor TE22OS Handleiding

18 November 2024
Cardinal Detecto

Cardinal Detecto AP-6 Handleiding

17 November 2024
Livoo

Livoo DOM431 Handleiding

15 November 2024
Scarlett

Scarlett SC-KS57P82 Handleiding

8 November 2024
Scarlett

Scarlett SC-KS57P78 Handleiding

8 November 2024
Primo

Primo SCK3 Handleiding

5 November 2024
Hyundai

Hyundai KVE 927 Handleiding

21 September 2024
Ufesa

Ufesa BC1100 Handleiding

11 September 2024