Weston 36-3553-W Handleiding
Weston
Snijmachine
36-3553-W
Lees hieronder de đ handleiding in het Nederlandse voor Weston 36-3553-W (5 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/5
FRENCH FRY CUTTER MODEL NO. 36-3550-W SOLD SEPARATELY
1/4â (0.6 CM) ATTACHMENT
MODEL NO. 36-3551-W
1/2â (1.3 CM) ATTACHMENT
MODEL NO. 36-3552-W
ATTENTION!
PLEASE INSPECT THIS PACKAGE THOROUGHLY FOR MISSING PARTS OR ANY PRODUCT DAMAGE. IF YOUR PRODUCT CONTAINS
SHIPPING DAMAGE, PLEASE CONTACT RETAILER FOR ASSISTANCE.
For all other questions regarding product usage, missing parts, product damage, difîżculty or warranty activation, please contact the Weston Brands
Customer Service Team: 8:00 am to 5:00 pm ET, Monday thru Friday
Customer.Service@WestonBrands.com / U.S. Residents Customer Service Line: 1-800-814-4895 (Outside U.S. Call: 001-216-901-6801)
Weston Brands, LLC, Southern Pines, NC 28387
WestonBrands.com
Please DO NOT return this item to the retailer before contacting Weston Brands Customer Service.
SAVE THESE INSTRUCTIONS! Refer to them often and use them to instruct others.
ATTENTION!
VEUILLEZ INSPECTER CET EMBALLAGE AVEC SOIN POUR Y DĂTECTER TOUTE PIĂCE MANQUANTE OU ENDOMMAGĂE. SI DES PIĂCES
ONT ĂTĂ ENDOMMAGĂES PENDANT LE TRANSPORT, VEUILLEZ COMMUNIQUER AVEC LE DĂTAILLANT POUR OBTENIR DE LâAIDE.
Pour toutes les autres questions concernant lâutilisation du produit, les piĂšces manquantes, les problĂšmes ou lâactivation de la garantie, veuillez commun-
quer avec lâĂ©quipe du service clientĂšle des produits Weston: de 8:00 Ă 17:00 HNE, du lundi au vendredi.
Customer.Service@WestonBrands.com / NumĂ©ro de tĂ©lĂ©phone du service clientĂšle pour les rĂ©sidents des Ă.-U. : 1-216-901-6801
NumĂ©ro de tĂ©lĂ©phone Ă lâextĂ©rieur des Ă.-U. : 001-216-901-6801
Weston Brands, LLC, Southern Pines, NC 28387
WestonBrands.com
Veuillez communiquer avec le service clientÚle des produits Weston AVANT de retourner cet appareil au détaillant.
CONSERVER CES DIRECTIVES! Veuillez les consulter fréquemment et les utiliser pour la formation.
ÂĄATENCIĂN!
Revise completamente el envase y compruebe que no falten partes o que algĂșn producto estĂ© dañado. si el producto estĂĄ dañado por el transporte,
solicite asistencia al distribuidor.
Para todas aquellas preguntas referentes al uso del producto, partes faltantes, daño del producto, diîżcultad o activaciĂłn de la garantĂa, comunĂquese
con el equipo de servicio al cliente de Weston Brands: desde las 8:00 am hasta las 5:00 pm ET, de lunes a viernes
Customer.Service@WestonBrands.com / LĂnea de Servicio al Cliente para Residentes de EE.UU.: 1.800.814.4895 (Fuera de EE.UU., llame al:
001-216-901-6801)
Weston Brands, LLC, Southern Pines, NC 28387
WestonBrands.com
NO devuelva este artĂculo al vendedor minorista antes de comunicarse con Servicio al Cliente de Weston Brands.
ÂĄGUARDE ESTAS INSTRUCCIONES! Consulte estas instrucciones y Ășselas para enseñar sobre el uso de este producto
a otras personas.
FRENCH FRY CUTTING PLATE
840348100 05/20
CHANGING THE CUTTING PLATE
Cutting
Plate
Blades
facing
inward
1. Remove the 3 Thumb Nuts and Washers from the French Fry Cutter. NOTE: When removing the last
Thumb Nut, hold on to the Cutting Plate, failure to do so, may result in the Cutting Plate falling causing
damage.
2. To remove the Pushing Plate, with the Handle in the down position, remove the 2 Push Plate Screws
from the top of the Pushing Plate.
3. Once the Push Plate Screws are removed, raise the Handle and remove the Pushing Plate.
4. Replace the Pushing Plate and secure with the 2 Push Plate Screws.
5. Replace the Cutting Plate and secure with the 3 Thumb Nuts and Washers.
NOTE: The Cutting Plate needs to be facing inward (FIGURE 2).
The dull portion of the Blades should be facing outward.
FIGURE 1
Push
Plate
Screws
FIGURE 2
It is recommended to thoroughly clean your French Fry Cutter before and
after each use. Clean with hot, soapy water, then rinse with clean water and
dry thoroughly.
1. Remove the 3 Thumb Nuts and Washers from the French Fry Cutter.
NOTE: When removing the last Thumb Nut, hold on to the Cutting Plate,
failure to do so, may result in the Cutting Plate falling causing damage.
2. To clean between the Blades of the Cutting Plate, use a long bristle brush
to remove debris. DO NOT use your îżngers!
3. To remove the Pushing Plate, with the Handle in the down position, remove
the 2 Push Plate Screws from the top of the Pushing Plate ( ).FIGURE 1
4. Once the Push Plate Screws are removed, raise the Handle and remove
the Pushing Plate.
5. To clean the Push Plate, remove any remaining debris with a blunt object,
such as a butter knife, then thoroughly clean with a long bristle brush.
CLEANING
FIGURE 1
Push
Plate
Screws
It is recommended to thoroughly clean your French Fry Cutter before and
after each use. Clean with hot, soapy water, then rinse with clean water and
dry thoroughly.
1. Remove the 3 Thumb Nuts and Washers from the French Fry Cutter.
NOTE: When removing the last Thumb Nut, hold on to the Cutting Plate,
failure to do so, may result in the Cutting Plate falling causing damage.
2. To clean between the Blades of the Cutting Plate, use a long bristle brush
to remove debris. DO NOT use your îżngers!
3. To remove the Pushing Plate, with the Handle in the down position, remove
the 2 Push Plate Screws from the top of the Pushing Plate ( ).FIGURE 1
4. Once the Push Plate Screws are removed, raise the Handle and remove
the Pushing Plate.
5. To clean the Push Plate, remove any remaining debris with a blunt object,
such as a butter knife, then thoroughly clean with a long bristle brush.
CLEANING
wCAUTION Cut Hazard. The cutting plates are sharp. Use care when handling.
The use of cut-resistant gloves is recommended when handling the cutting plates.
wCAUTION Cut Hazard. The cutting plates are sharp. Use care when handling.
The use of cut-resistant gloves is recommended when handling the cutting plates.
MODELO FRY CORTADOR FRANCĂS NO.
36-3550-W SE VENDE POR SEPARADO
1/4â (0.6 CM) ACCESORIO
MODELO NO. 36-3551-W
1/2â (1.3 CM) ACCESORIO
MODELO NO. 36-3552-W
CORTE CUCHILLA DE
PAPAS FRITAS
FIGURE 1
Tornillos
de la
placa
para
empujar
Se recomienda que limpie minuciosamente el cortador de papas a la
francesa antes y después de cada uso. Låvelo con agua caliente y
jabonosa, luego enjuåguelo con agua limpia y séquelo minuciosamente.
1. Retire las tres tuercas con orejetas y arandelas del cortador de papas a
la francesa. NOTA: Al retirar la Ășltima tuerca con orejeta, sostenga la placa
cortadora. Si no lo hace, puede caerse la placa cortadora y causar daños.
2. Para limpiar entre las hojas de la placa cortadora, use un cepillo de
cerdas largas para retirar desechos. ÂĄNO use los dedos!
3. Para retirar la placa para empujar, coloque la manivela en la posiciĂłn
inferior y retire los dos tornillos de la placa para empujar de la parte
superior de esta ( ).FIGURA 1
4. Después de retirar los tornillos de la placa para empujar, eleve la
manivela y retire la placa para empujar.
5. Para limpiar la placa para empujar, retire cualquier desecho restante
y con un objeto no punzante, como un cuchillo para mantequilla, luego
lĂmpiela minuciosamente con un cepillo de cerdas largas.
LIMPIEZA
wPRECAUCIĂN Riesgo de cortaduras. Las placas de corte tienen îżlo. Tenga cuidado al
manipularlas Se recomienda el uso de guantes resistentes al corte al manipular las placas de corte.
Product specificaties
Merk: | Weston |
Categorie: | Snijmachine |
Model: | 36-3553-W |
Heb je hulp nodig?
Als je hulp nodig hebt met Weston 36-3553-W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Weston
26 Augustus 2024
26 Augustus 2024
26 Augustus 2024
26 Juli 2024
16 April 2024
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Bomann
- Snijmachine Borner
- Snijmachine Brandson
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Kogan
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Perel
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Swan
- Snijmachine Team
- Snijmachine Thane
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Ozito
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Camry
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Khind
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Maruyama
- Snijmachine Royal Catering
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine Ovela
- Snijmachine CaterChef
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Cigweld
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Wolfcraft
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
14 November 2024
14 November 2024
14 November 2024
14 November 2024
5 November 2024
2 November 2024
16 Oktober 2024
16 Oktober 2024
14 Oktober 2024
14 Oktober 2024