Walrus Audio Slöer Handleiding

Walrus Audio Niet gecategoriseerd Slöer

Lees hieronder de 📖 handleiding in het Nederlandse voor Walrus Audio Slöer (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/7
*The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Got questions or need a repair?
Email help@walrusaudio.com to talk with a real live human about your Walrus gear!
This product comes with a limited lifetime warranty.
Click Here for more info.
The Slöer Stereo Ambient Reverb allows players to create and save
up to three presets with wide, lush, modulated, sleepy and ambient
soundscapes. Stocked with five different algorithms specifically designed
to invoke textures for bringing dreams from your subconscious to reality.
9 volt DC, Center Negative • 100mA min*
Slöer
STEREO AMBIENT REVERB
Mono In / Mono Out
Use left input.
Use left output.
MONO IN MONO IN (L) IN(R) IN
MONO OUT (L) OUT (L) OUT
(R) OUT (R) OUT
Mono In / Stereo Out
Use left input in.
Left input will feed the same input
signal to the right channel when
using mono in.
Use left and right output.
Stereo In / Stereo Out
Use left and right input.
Use left and right output.
DREAM
Lush reverb with a latching pad function. Press the sustain switch to latch
signal. Experiment with the X Fader to add vibrato over the pad. Press sustain
again and pad will decrease according to where the decay knob is set.
LIGHT
Bright reverb with an octave up shimmer. Create ethereal sounds with the
X Fader controlling how much shimmer is added to the reverb.
RAIN
Tappy and trippy, this program creates a unique effect with lower levels of
diffusion allowing the reverb delay taps to audibly create an echo like effect
within your reverb. Use the X Fader to set the amount of diffusion of the delay
taps, with lower X for more echo and higher X for a smoother sound.
DARK
Add a lower octave to your reverb trail. Create deep and wide atmospheric
sounds and channel nightmarish soundscapes. The X Fader sets the level of a -1
octave signal that feeds the reverb.
RISE
Auto-swell reverb for beautiful cinematic swells. Don’t rush it. Let it breathe and
gently wake up. The X Fader sets the amount of time it takes the reverb to swell
in after a note is played. Set lower for shorter rise times and higher for longer
rise times.
Note: Rise works best in front of an amp, not through an FX loop.
Modes
Use the rotary switch to select one of five onboard algorithms.
Waveshapes
With the pedal engaged, hold down the bypass
switch and use the mode knob to select the
desired wave shape, and the depth knob to set
the desired rate. The bypass LED will flash at the
rate of modulation while in the secondary mode.
The pedal remembers the wave shape and rate
settings for the current preset when saved, until
the next time they are modified. The pedal also
maintains the algorithm and depth setting
when modifying secondary functions.
SINE – Smooth and even pitch up and down
modulation. A classic modulation sound.
WARP – Asymmetric pitch up modulation
similar to a warped vinyl record.
SINK – Asymmetric pitch down modulation for
sinking detune similar to a Bigsby tremolo arm.
SQUARE – Symmetric square wave pitch up
and down modulation for stepped modulation.
Hard edged transitions create unique
modulation artifacts.
RANDOM – Randomized sample and hold style
modulation.
Controls
Decay: Adjusts the length of the reverb
decay. Go from tight short reverb, at full counter
clockwise, to long drawn out texture at full clockwise.
Filter: Controls the tone of the reverb decay. Each algorithm
includes a low-pass filter optimized for that unique sound and the
knob controls the filter cutoff frequency. Turn the knob clockwise to
open the filter for brighter tones, and counter clockwise to close the filter
resulting in a darker tone.
Depth: Controls the amount of modulation applied to the reverb decay. Go
from no modulation, to nightmare inducing pitch bending at high settings.
- Secondary Function: Rate - Press and hold Bypass and turn the Depth
knob to control the speed of the modulation applied to the reverb decay.
The Bypass LED will blink at the rate of the modulation while in secondary
control mode.

Product specificaties

Merk: Walrus Audio
Categorie: Niet gecategoriseerd
Model: Slöer

Heb je hulp nodig?

Als je hulp nodig hebt met Walrus Audio Slöer stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Walrus Audio

Walrus Audio

Walrus Audio Canvas Mono Handleiding

14 November 2024
Walrus Audio

Walrus Audio Julianna Handleiding

12 November 2024
Walrus Audio

Walrus Audio Lillian Handleiding

12 November 2024
Walrus Audio

Walrus Audio Julia Handleiding

12 November 2024
Walrus Audio

Walrus Audio Descent Handleiding

12 November 2024
Walrus Audio

Walrus Audio Meraki Handleiding

6 November 2024
Walrus Audio

Walrus Audio Monumental Handleiding

10 Juni 2024
Walrus Audio

Walrus Audio Fundamental Ambient Handleiding

6 April 2024
Walrus Audio

Walrus Audio Canvas Tuner Handleiding

1 December 2023
Walrus Audio

Walrus Audio Phoenix Handleiding

18 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Alpine

Alpine CHM-S611 Handleiding

25 November 2024
AOpen

AOpen DE3650-C Handleiding

25 November 2024
Lazer

Lazer Urbanize MIPS Handleiding

25 November 2024
Symmons

Symmons Dia 353GB-24 Handleiding

25 November 2024
SoundTube

SoundTube IPD-RS62-EZ Handleiding

25 November 2024
Moen

Moen Camerist 4905 Handleiding

25 November 2024
Lazer

Lazer Cameleon DLX Handleiding

25 November 2024
DMT

DMT DLD-85 Handleiding

25 November 2024
AOpen

AOpen AM1120T Handleiding

25 November 2024