Walrus Audio Canvas Power 8 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Walrus Audio Canvas Power 8 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Got questions or need a repair?
Email help@walrusaudio.com to talk with a real live human about your Walrus gear!
This product comes with a limited lifetime warranty.
Click Here for more info.
Thank you for trusting us to provide your pedals with clean, quiet isolated power. The Canvas Power
series is built using modern switch mode supply architectures. This means each output is isolated,
highly efcient, and heavily filtered, ensuring they supply plenty of power with incredibly low noise.
Our goal with Canvas Power is to bring simplicity and modularity to power your pedals.Rest easy
knowing your pedals are taken care of as your collection grows. Canvas Power is ready to travel
the globe with its world wide voltage-compatible DC brick. Just be sure to pack your countrys
appropriate IEC cable right next to your toothbrush.
First, wire up your board. Connect your pedals to the
appropriate power outputs. Second, connect the DC Brick
cable to the 24V DC Input. Finally, connect the IEC cable to
the DC Brick to power your pedals.
IEC CABLE
DC BRICK
DC BRICK
CABLE
24V INPUT
POWER OUTPUTS.
GETTING STARTED
3rd
2nd 1
st
5, 8, 15, 22 MANUAL
Each output is rated at 9VDC, 500mA. This means they can power
a wide variety pedals on the market. Before connecting, be sure to
check your pedal’s voltage, polarity, and required current.
Note: We reccomend connecting all of your pedals before
powering on your power supply.
The LED indicators above each
output will light up, indicating the DC cable is
plugged in and is making a solid connection.
If you have a pedal that requires 12 or 18V, we’ve got you
covered. Before connecting your pedal, double check
its power requirements and set the toggle switch to the
appropriate voltage. Nobody likes a crispy pedal. Then
connect the DC cable to your pedal.
Note: 375mA max. @ 12V / 250mA max. @ 18V
VOLTAGE SELECTION
When expanding your system, we recommend
connecting the largest unit to the DC Brick. When
linking additional Canvas Power units, always
reference the power meter on the unit connected
to the DC Brick.
With the 24V Link Output,
you can connect up to two
additional Canvas Power
devices.
LINKING
POWER
The Power 5 and 8 include a 48W, 24VDC power brick. If you need to link
multiple power supplies together that require more than 48W of total power, we
recommend using the 96W brick (included with Power 15 and Power 22).
To estimate how much power your pedal board will need, do this calculation for each
pedal, then add up the results to get the estimated total wattage required by your board.
Multiply the pedal’s voltage requirement by its current draw.
Voltage(V) x Current(A) = Power(W)
Example: The Slö Reverb requires 9VDC and 100mA (0.1A) current draw so
9VDC x 0.1A = 0.9 Watts.
WANT TO GET REALLY TECHNICAL?
Want to bring all 44 of your pedals
for your weekendy rig? Slap
a couple Power 22s under your
board and you’re good to go.


Product specificaties

Merk: Walrus Audio
Categorie: Niet gecategoriseerd
Model: Canvas Power 8

Heb je hulp nodig?

Als je hulp nodig hebt met Walrus Audio Canvas Power 8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Walrus Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd