Walrus Audio Julianna Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Walrus Audio Julianna (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
9 volt DC, Center Neg.
100mA min*
Bypass LED
Mono Out
Bypass Switch
Stereo Out
Rate LED
Mono In
Tap / Expression
Tap Switch
Stereo In
*The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Got questions or need a repair or want to mail us some cookies? Email help@walrusaudio.com
All our pedals come with a limited lifetime warranty. walrusaudio.com/pages/warranty-and-repair for more info.
MOMENTARY FEATURES
TAP / XPRESS JACK
BYPASS SWITCH - Holding down the Bypass switch, when the pedal is engaged, allows you to set
the secondary LFO rate and control the amount of drift added to the LFO by turning the Rate and Depth
knobs.
TAP SWITCH - Hold down the tap switch to ramp to the secondary LFO rate. If the secondary LFO
rate is faster than the current rate, the pedal will ramp up to it. If the secondary rate is set slower, it will
ramp down.
The Tap/EXP jack can serve as either an external tap input or an expression pedal input. Before using
this jack, be sure to set the internal dip switches to the position that corresponds to the intended use.
If connecting an external tap, make sure it is a normally open source with a latch time of less than
250ms.
To assign an expression pedal, enter assignment mode by holding down both the Bypass and Tap
switches until the bypass LED blinks rapidly. While continuing to hold the switches, turn either the
Depth knob, Rate knob, or both to assign them to be controlled by the expression pedal. To clear an
assignment, enter the assignment mode and exit the mode by releasing both stomp switched without
turning any knobs. Make sure to use a TRS cable to connect the expression pedal, and that the pedal you
are using is configured to send the control signal on the tip conductor of the cable.
RATE The Rate knob allows you to control the speed of the main LFO.
SECONDARY FUNCTION: MOMENTARY LFO RATE - The Rate knob also allows you to set the
momentary LFO rate. While the pedal is engaged, hold down the bypass switch and turn the Rate knob.
The Bypass LED will blink at the momentary LFO rate and will turn solid once you release the Bypass
switch, storing your momentary LFO rate setting. See Momentary Features section to learn more.
DEPTH – The Depth knob controls the strength of the chorus and vibrato effect by setting the
amplitude of the LFO.
SECONDARY FUNCTION: DRIFT - The secondary function of the Depth knob sets the amount of
“Drift” applied to the LFO. The Drift feature on the Julianna gently speeds up and slows down the current
rate of the LFO based on the amount of Drift applied. It’s like a little robot is inside your pedal moving
the Rate knob up and down. Lower settings offer a small amount of Drift while higher settings are more
dramatic. To introduce Drift, hold down the Bypass switch, with the pedal engaged and turn the Depth
knob to the desired setting. To turn Drift off, follow the same procedure and set the Depth knob to zero.
LAG The Lag knob lets you set the center delay time that the LFO modulates around. From smooth,
tight modulation at lower settings, to noisy and nauseating detune at maximum.
D-C-V BLEND The DCV knob sets the ratio of dry to wet signal through the mono channel of the
Julianna. Traditional mono chorus sounds can be heard with the knob set around noon. Pitch vibrato is
found in the full clockwise position. The ground in between offers unique blends of chorus and vibrato
not commonly found on other chorus pedals.
When both outputs are connected, set the DCV knob to full counterclockwise to send your dry signal to
the mono output and vibrato signal to the stereo output for a traditional stereo chorus sound. Explore
other variations by turning the DCV knob up slightly to add some vibrato signal to the dry output
changing the stereo image.
DIV SWITCH The Div switch lets you select a quarter note, quarter note triplet, or eighth note
multiplier to scale a tapped in tempo.
NOTE: the div switch only operates on a tapped tempo, not the Rate knob.
SHAPE SWITCH – The Shape toggle lets you select a sine, triangle, or random LFO wave to modulate
the pitch of your signal. There are no rules here. Sine is traditionally used for vibrato tones and triangle for
chorus, but feel free to change it up! The random wave is a true random LFO and is awesome for creating
unpredictable pitch vibrato effects. The random wave combined with the drift effect makes for seasick
unpredictability. Take some Dramamine and give it a try.
BYPASS LED - Illuminated when the effect is engaged and blinks the secondary LFO rate when
holding down the Bypass switch when the pedal is engaged. Note the Julianna remembers its last
known bypass state. If you turn your pedalboard off with the Julianna engaged, the next time you power
it up, it will automatically power up engaged. This is great for players who use a bypass looper to avoid
having to turn the pedal on manually each time they power on their pedalboard.
TAP LED The Tap LED pulses at the rate of the LFO set by the Rate knob or the rate of a tapped in
tempo.
Building off of the lush, tonal landscapes that the Julia created,
Julianna is an all analog, digital LFO, stereo chorus/vibrato
with new expanded features. Julianna is able to produce mild
smooth chorus, to seasick vibrato and everywhere in between.
The familiar controls like Lag, Dry-Chorus-Vibrato Blend, and
selectable LFO wave shapes are all still here but Julianna
employs some new tricks. Secondary LFO speed, modulation
drift, tap/expression control and momentary features
will have you commanding all new kinds of sounds
not found in traditional chorus pedals.
CONTROLS


Product specificaties

Merk: Walrus Audio
Categorie: Niet gecategoriseerd
Model: Julianna

Heb je hulp nodig?

Als je hulp nodig hebt met Walrus Audio Julianna stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Walrus Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd