Vivanco UR 2400 Handleiding

Vivanco Afstandsbediening UR 2400

Lees hieronder de 📖 handleiding in het Nederlandse voor Vivanco UR 2400 (88 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/88

TITAN UNIVERSAL REMOTE

(GB) Instructions ► 2

(D) Bedienungsanleitung ► 7

(F) Notice d’emploi ► 12

(E) Instrucciones para el uso ► 18

(I) Istruzioni per l’uso ► 23

(NL) Gebruiksaanwijzing ► 28

(PL) Instrukcja obsługi ► 33

(P) Manual de instruções ► 38

(N) ► 43Bruksanvisning

(S) Bruksanvisning ► 48

(FIN) Käyttöohje ► 53

(RUS) Руководство

по эксплуатации ► 58

(GR) Οδηγίες χρήσης ► 63

(TR) Kullanma talimatı ► 69

(CZ) Návod k obsluze ► 74

(SK) Návod na obsluhu ► 79

(H) Kezelési útmutató ► 88

CONTROLS UR 2300, UR 2400

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: , Helpline: +49 (0) 4102 231135hotline@vivanco.de 1

(GB) Instructions

Inserting the batter-

ies

Open the battery com-

partment on the under-

side of the remote.. Then

insert 3 AAA batteries.

Make sure that the polar-

ity is correct: the "+" and

"-" markings on the bat-

teries and in the compart-

ment must match.

- To check functionality,

press any button. If

everything is correct, light will be visible when a

button is pressed.

Adapting to Appliances

In order to control your appliances you must ad-

apt or set the remote control to them. There are

three ways of doing so:

Direct control code entry

Example: Setting to control a Philips televi-

sion set:

1 The attached list gives, for example, the

Philips Code .0099

-Please make sure you

have selected the code

from correct list for tele-

vision sets (TV).

2 Press (power) but-

ton and then (mute)

button simultaneously

until a device lamp

(LED) lights con-

stantly.

3 Press button SELECT

as often until e.g. TV

led is on.

- If you don´t press SE-

LECT the led indicates

the device to be set.

4 Then press number

buttons (e.g. ) 0 0 9 9

in sequence.

5 Once the numbers

have been entered the

lamp goes out and the

remote control is ready

to control your appli-

ance.

6 Finally, test the control code setting by trying

to control, in this example, your television set.

If it does not work at all or not correctly try a

different code from the list or the code search

(see below).

7 To set the remote control for other appli-

ances, proceed in the same way. Instead of

the appliance select another device e.g. TV

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: , Helpline: +49 (0) 4102 231135hotline@vivanco.de 2

SAT DVB/ (SAT, DECODER), /DVD BLU RAY

or (UR 2400 only).HTS/AMP

- You terminate the mode by pressing button

or by code input interruption of more than 10

seconds.

- If lamp flashes twice code was not accepted

and code input can be started again.

Code search

If the brand of your appliance is not in the list or

none of the codes given fits, we recommend a

code search.

Manual and Automatic code search

1 Switch on the appli-

ance to be controlled.

Program is running.

2 Press (power) but-

ton and then (mute)

button simultaneously

until a device lamp

(LED) lights con-

stantly.

3 Press button SELECT

as often until e.g. TV

led is on.

4 Then point the remote

control at the appli-

ance to be controlled.

5 Press the ▲ CH/SKIP

or ▼ button about any 1 second so CH/SKIP

often until the appliance, e.g. your TV reacts

by power off.

- You can invert search direction by changing

from button ▲ to ▼ and vice versa.

- If your appliance has switched itself off, you

must switch it on again, e.g. on the appliance or

with the original remote control, to continue

searching.

- When your appliance reacts you can also try

out other buttons, except ▲ or ▼ or or , OK

without interrupting the search. If some buttons

do not work properly, simply continue searching

by pressing ▲ or ▼ again.

6 Enable and disable Automatic code search :

Press and hold or ▼ button until device ▲

lamp (LED) turns off. Then one power on/off

command per code is send out, one after the

other and device led is flashing. Switch to

Manual Code Search again by pressing any

button, except or OK.

7 When your appliance reacts correctly, press

(or ) button, for end of searching and OK

saving of found code. The lamp (LED) goes

out.

- The last code entered remains stored. The

search stops after approx. 30 seconds of in-

activity or at end of code list.

Code identification

You can read off the 4-digit codes you have set

at any time:

1 Press button as often until e.g. SELECT TV

led is on.

2 Press (power) button and then or1, 2, 3 4

button simultaneously depending on the part

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: , Helpline: +49 (0) 4102 231135hotline@vivanco.de 3

Product specificaties

Merk:	Vivanco
Categorie:	Afstandsbediening
Model:	UR 2400
Kleur van het product:	Zwart
Aan/uitschakelaar:	Ja
Ondersteund aantal accu's/batterijen:	3
Teletext:	Ja
Backlight toetsen:	Ja
Backlight-kleur:	Wit
Programmeerbare timers:	Ja
Batterijen inbegrepen:	Nee
Type batterij:	AAA
Cursortoets:	Ja