Ventus W177 Handleiding
Ventus
Weerstations
W177
Lees hieronder de 📖 handleiding in het Nederlandse voor Ventus W177 (92 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/92
0
VENTUS W177
ENGLISH……………………………………………………………………………..PAGE 01
GERMAN……………………………………………………………………………..PAGE 15
DANISH………………………………………………………………………………PAGE 31
NORWEGIAN………………………………………………………………………..PAGE 49
SWEDISH…………………………………………………………………………….PAGE 63
FINNISH PAGE 77 ………………………………………………………………………………
1
W177 Ventus Wireless Weather station . Owner’s Manual
Thank you for purchasing the new generation of professional weather station. Designed and engineered
with the state- -art technology and components, this instrument will provide accurate and reliable of
measurement of wind speed & direction, wind chill, daily/weekly/monthly/accumulated rainfall,
barometric pressure, weather forecast, door humidity, temperature, heat index & dew pointin /outdoor .
Read this manual carefully to fully explore the features and functions of the new product.
In this package you will find:
One monitor (Receiver)
One anemometer (Transmitter transmit wind & outdoor Channel-1 temperature/humidity data) –
One rain gauge (Transmitter transmit rainfall data) –
Mounting hardware for rain gauge (2 sets of screws & plastic screw plug s)
Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws & nuts)
One owner s’ ’ manual
Additional tools needed for installation
- Small Phillips screwdriver
- Hexagonal Key
- Electric drill
- Pencil
- Level
- Mast, 1 1.25 inch (2.54 3.18 cm) in diameter (to mount the anemometer) – –
Installation
The weather station operates at 433MHz and does not require wire installation among the component
parts. To ensure successful installation and the best performance, we recommend you follow the
installation instructions in the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
Main Power source: Plug in the adapter jack into the side of the unit for basic operation and continuous
backlight.
Backup Power: Open the battery door and insert pieces of AAA batteries according to the polarity 3
indicated, close the battery cover.
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly and the
2
pressure reading will flash. to set the sea level pressure value. Press PRESSURE Press “ ”▲or “ ”▼“ ” to
confirm the setting and exit. This allows the unit to provide a more accurate weather forecast &
pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more
information, see “WEATHER FORECAST & BAROMETRIC PRESSURE section. ”
Note: you may obtain the current sea level pressure from the weather web site for your locate area.
2. Selecting a location for the anemometer
Select a mounting location for the anemometer that is:
- Outdoors, not blocked on top or sides, so wind can freely reach the anemometer
- Within 20 meter open area from the monitor. Reduce distance if obstacles is between the
anemometer & the monitor
The best location for the anemometer is usually mounted on a mast in an open area where wind is not
blocked on top or sides, or above roof level on the building where the monitor is located.
Testing the effective transmission range
Before mounting the anemometer, measure the distance between the monitor & anemometer and be
sure it is within the effective transmission range. It is recommended to perform a simple RF
transmission test before mounting.
1) Place the monitor in your selected indoor location and install adapter & batteries (see Battery & “
adapter installation for the monitor section above) ”
2) Place the anemometer horizontally in your selected outdoor location. Loosen the screws on the
battery door with a small Phillips screwdriver and open the battery door. Insert 2 pieces of AA
batteries according to the polarity indicated. Close the battery door and tighten the screws.
3) Hold CHANNEL/SEARCH button on the monitor for 3 seconds and the wind direction, “ ”
temperature & humidity icons will flash on the display. The monitor is now searching for all remote
sensors for 2 minutes.
4) If valid wind direction, wind speed and channel-1 temperature/humidity readings are shown on the
monitor within minutes, the RF transmission is successful and the anemometer & monitor are 10
within the effective transmission.
If above readings are not shown after minutes of searching, the transmission is failed. 10
Shorten the distance between the anemometer & monitor. Reset the anemometer by removing all
batteries from the anemometer & wait for 10 seconds before re-installing the batteries again.
Repeat step 3 & 4 until the transmission is successful.
5) Remove all batteries from the anemometer before mounting and calibration.
Product specificaties
| Merk: | Ventus |
| Categorie: | Weerstations |
| Model: | W177 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ventus W177 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Weerstations Ventus
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Weerstations
- Weerstations Ade
- Weerstations Alecto
- Weerstations Ascot
- Weerstations Auriol
- Weerstations Brigmton
- Weerstations Denver
- Weerstations Eurochron
- Weerstations Hama
- Weerstations Hyundai
- Weerstations Irox
- Weerstations Konig
- Weerstations La Crosse
- Weerstations Livoo
- Weerstations Meade
- Weerstations Nedis
- Weerstations Techno Line
- Weerstations Technoline
- Weerstations TFA
- Weerstations UPM
- Weerstations Viking
- Weerstations Oregon
- Weerstations Clas Ohlson
- Weerstations GoGEN
- Weerstations Steren
- Weerstations Conrad
- Weerstations EMOS
- Weerstations Cotech
- Weerstations Cresta
- Weerstations Prologue
- Weerstations Trevi
- Weerstations Kemot
- Weerstations AcuRite
Nieuwste handleidingen voor Weerstations
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022