Ventus W224 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ventus W224 (33 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/33
0
VENTUS W224
ENGLISH……………………………………………………………………………..PAGE 01
DANISH..……………………………………………………………………………..PAGE 06
GERMAN…………..…………………………………………………………………PAGE 12
NORWEGIAN………………………………………………………………………..PAGE 18
SWEDISH………………………………………………………………………….PAGE 23
FINNISH………………………………………………………………………………PAGE 28
1
VENTUS W224 WIRELESS COLOR WEATHER STATION WITH TOUCH DISPLAY
Owners Manual
Name and Functions of Buttons:
Front Touch Keys Functions
Right (>) Change display mode from left to right
TIME -> INDOOR -> OUTDOOR -> AUTO
Left (<) Change display mode from right to left
TIME <- INDOOR <- OUTDOOR <- AUTO
Mode TIME mode: Toggle between time, alarm time, calendar, year & weekday
INDOOR mode: Toggle between indoor temp/humidity, heat index & dew point
OUTDOOR mode: Toggle between outdoor temp/humidity, heat index & dew point
AUTO mode: Disable or enable auto-scrolling display mode
Top Key (two micro switch at the bottom, press the whole unit) Press Functions
SNOOZE/LIGHT Trigger snooze alarm & extend backlight
Back Keys Press Functions Hold 3 seconds
CLOCK Set Clock, Calendar & Weather
ALARM Enable/disable alarm Alarm time setting
MEM Read max/min temperatures & humidity Clear memory record
ZONE/
-
Toggle Radio-Controlled & Zone time Zone time setting
1 step backward in setting Fast backward
/+ Search for Radio-Controlled time
1 step forward in setting Fast advance
C/F/Search Toggle degree C & F unit Search for remote sensor
LIGHT ON/OFF Turn on/off continuous backlight when
adapter is connected
2
BATTERY & ADAPTER INSTALLATION
Home Receiver Unit:
Main Power Source: Plug in the 6.0V adapter into the adapter socket for basic operation and continuous
backlight.
Backup Power: Open the battery door, install 2 pieces of AA backup batteries according to the polarity indicated.
Close the battery cover.
Remote Sensor:
Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA batteries according to the
polarity indicated. Replace the cover and tighten the screws.
INITIAL SETTING
After powering on the main unit, the weather icons will flash. Press [+] or [
-
] to select local weather condition as
initial setting. Press [CLOCK] to confirm and exit. (Refer “WEATHER FORECAST” section for details).
SETTING UP THE WIRELESS THERMO-HYGROMETER:
For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1 for the first
remote sensor. Set channel 2 and channel 3 for the 2
nd
and 3
rd
sensor.
Press and hold [SEARCH] button for 3 seconds to search for remote unit. The outdoor reading (“----“ or
temperature digits) in the OUTDOOR display mode will flash indicating it is in the searching mode
Press the [Tx] button on the back of remote sensor to transmit RF signal.
When RF connection is established, the respective temperature & humidity of the selected channel will
appear on the OUTDOOR display mode.
WEATHER FORECAST
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure.
The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric pressure change and is
about 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we cannot be responsible
for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
(Whole graphic is flashing)
To obtain an accurate weather forecast, you need to input your current weather condition as initial setting. After
the powering on the main unit, Press [+] or [
-
] to select the local weather condition as initial weather forecast
setting. Press [CLOCK] to confirm and exit.


Product specificaties

Merk: Ventus
Categorie: Weerstations
Model: W224

Heb je hulp nodig?

Als je hulp nodig hebt met Ventus W224 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden