Velleman VTSSC50N Handleiding

Velleman Soldeermachine VTSSC50N

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman VTSSC50N (27 pagina's) in de categorie Soldeermachine. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/27

VTSSC50N

SOLDERING STATION WITH CERAMIC HEATER

SOLDEERSTATION MET KERAMISCH VERWARMINGSELEMENT

STATION DE SOUDAGE AVEC ÉLÉMENT D'ÉCHAUFFEMENT

CÉRAMIQUE

ESTACIÓN DE SOLDADURA CON ELEMENTO CALENTADOR CERÁMICO

LÖTSTATION MIT KERAMISCHEM HEIZELEMENT

ESTAÇÃO DE SOLDADURA COM ELEMENTO DE AQUECIMENTO

CERÂMICO

STACJA LUTOWNICZA Z GRZAŁKĄ CERAMICZNĄ

USER MANUAL 2

HANDLEIDING 5

MODE D'EMPLOI 8

MANUAL DEL USUARIO 12

BEDIENUNGSANLEITUNG 15

INSTRUKCJA OBSŁUGI 18

MANUAL DO UTILIZADOR 22

VTSSC50N

V. 09 29/01/2021 2 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device should be returned to your

distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

This device can be used by children aged from 8 years and above,

and persons with reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they have been given

supervision or instruction concerning the use of the device in a

safe way and understand the hazards involved. Children shall not

play with the device. Cleaning and user maintenance shall not be

made by children without supervision.

Read and understand this manual and all safety signs before

using this appliance.

Indoor use only. Keep this device away from rain, moisture,

splashing and dripping liquids. Never put objects filled with liquids

on top of or close to the device.

Always disconnect mains power when the device is not in use or

when servicing or maintenance activities are performed. Handle

the power cord by the plug only.

Caution! leave the power cord plugged in After switching off,

for a few minutes. When you switch off the unit, the automatic

cooling function blows cooling air through the heater pipe for a

short period. This protects the heater from damage and extends

its lifetime. Do not disconnect the mains plug during this cooling

process.

Do not crimp the power cord and protect it against damage.

Warning! If the power cord is damaged, it must be replaced by

the manufacturer, its service agent, or similarly qualified persons

in order to avoid any hazard.

Make sure that the available voltage does not exceed the voltage

stated in the specifications of this manual.

Plug the power cord into a suitable, mains outlet. earthed

Risk of electroshock when opening the cover. Touching live

wires can cause life-threatening electroshocks. Do not

disassemble or open the housing yourself. Have the device

repaired by qualified personnel.

Do not operate the device with wet hands.

VTSSC50N

V. 09 29/01/2021 3 ©Velleman nv –

Never use the device on live electronic circuits. Make sure power

to the work piece is cut and capacitors are discharged.

Do not use near inflammable products or in explosive

atmospheres. Heat can cause fire to inflammable products even

when they are not in sight. Only use in properly ventilated rooms.

Incorrect use may cause fire.

Do not touch the shafts, tips, or hot air gun as this can cause

serious burns. Keep the tips and hot air away from the body,

clothes, or other flammable material. Do not aim the hot air gun

at the eyes. Use gloves and/or heat-resistant tools to pick up the

PCB assembly to prevent burns. Always return the irons and gun

to their stands between uses; always let the device cool down

after use and before storage.

Place the device on a level, stable, and fire resistant working

surface.

WARNING! - This tool must be placed on its stand when not in

use; do not leave the tool unattended when switched on.

Do not inhale solder fumes. The vapours that are released during

soldering are harmful. Therefore, you shall only use the soldering

station in well-ventilated areas or under an exhaust hood (solder

fume extractor). Dispose of fume filters and solder residue in

accordance with local regulations.

• Use the soldering iron on a heatproof workbench.

• Place the soldering iron in its holder after use.

• Let a hot soldering iron cool down naturally and do not immerse in water.

3. Features

• manual temperature setting

• power-on LED indication

• with on/off switch

• ceramic heating element

• with stand for left- or right-handed use

• standard tip (incl.): BITC50N2 (1.0 mm).

4. Operation

• Verify whether the operating voltage of the unit is compatible with the mains voltage prior to plugging in

this device.

• Make sure that the device was not damaged in transit.

• Use the rotary control on the front panel to set the desired temperature.

5. Common Causes for Tip Failure

• The tip is not sufficiently tinned.

• Wiping the tip on a surface with high sulphur content or on a dirty or dry sponge or rag.

• Contact between the tip and organic or chemical substances such as plastic, silicone, grease, etc.

• Impurities in the solder and/or solder with a low tin content.

Note: The heating element may be damaged when its temperature reaches 430 (806 °C °F).

Product specificaties

Merk:	Velleman
Categorie:	Soldeermachine
Model:	VTSSC50N
Kleur van het product:	Black, Blue
Gewicht:	1850 g
Breedte:	160 mm
Diepte:	120 mm
Hoogte:	95 mm
Soort:	AC-soldeerbout
Gebruikershandleiding:	Ja
Vermogen:	48 W
Temperatuur (min):	150 °C
Temperatuur (max):	420 °C
Materiaal:	Keramisch
AC-ingangsspanning:	24 V