Valco Baby Rebel Q Air Handleiding

Valco Baby Kinderwagen Rebel Q Air

Lees hieronder de 📖 handleiding in het Nederlandse voor Valco Baby Rebel Q Air (8 pagina's) in de categorie Kinderwagen. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in
this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand
all the warnings and safety guidelines before use.
Retain this guide in a safe place for future reference.
PRODUCT REFERENCE GUIDE
Due to our policy of continuous product development, this product is
constantly evolving. It is possible that some features or procedures outlined
here have changed since this document was written.
If you are unsure of any procedure shown here, please contact us via the web
at info@valco.com.au to obtain the most up to date information before use.
Include the batch number, which can be found on a sticker on the frame.
All pictures and diagrams herein are provided for illustration purposes only.
Actual product, colour or fabric may vary. VALCO BABY reserves the right
to modify or alter any specication or colour without notice or obligation to
modify any product previously purchased
FURTHER INFORMATION
valcobaby.com.au
REBEL Q AIR
STROLLER WITH OPTIONAL
BASSINET ACCESSORY
© Copyright VB 2014
vs270214
Find us on:
ASSEMBLY
OPENING YOUR STROLLER
FIGURE A
1. Remove the stroller from the carton and dispose
of all packaging responsibly. The front wheels, rear
wheels, seat, bumper bar and hood all need to be
installed prior to use
2. Lay the stroller frame at on the ground with the
handle facing upwards. Release the frame lock if
engaged (see Diagram Q)
3. Lift the handle upward to a vertical position. You
will feel the chassis unfolding as you lift.
FIGURE B
4. Continue to lift the handle until you feel the
chassis lock into the open position.
IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES
ARE SECURELY ENGAGED BEFORE USE.
INSTALLING/REMOVING THE WHEELS
FIGURE C - REAR WHEELS
5. Pressing on the axle release button, insert the
axle through the outside of the metal hub and
through the nylon brake cog.
IMPORTANT: INSERT THROUGH OUTSIDE OF THE WHEEL
- THE SIDE WHICH DOES NOT HAVE THE BRAKE COG
SPROCKETS
6. While pressing the axle release button (6), insert
the wheel axle into the wheel housing of the frame
at the rear of the stroller chassis.
7. Keeping the axle release button depressed, insert
the wheel as far as it will go into the channel.
Release the button and pull the wheel slightly
back toward you to ensuring that it has locked
securely into place.
8. Repeat this procedure for the other wheel.
9. To remove a rear wheel, rmly grasp the wheel
spokes while pressing the axle release button.
Gently pull the wheel free of the wheel housing.
FIGURE D - FRONT WHEELS
10. Line each front wheel pin (10) with the
corresponding front wheel housing (11).
11. Insert wheel pin into the wheel housing and push
it up until it clicks into place.
12. To remove the front wheel, rmly grasp the wheel
while pressing the wheel release button (13) and
gently pull the wheel free of the wheel housing.
For optimum wheel performance ensure that the tyres are
always inated to:
REAR TYRES: maximum 195Kpa
FRONT TYRES: maximum 195Kpa
PRESS
6
A
B
C
Outside
wheel hub
Axle button
5
click
10
11
13
D
FIGURE E - FRONT WHEEL LOCK
13. The front wheels of your stroller offer either a full,
360Âș swivel action or a locked position.
14. To lock the front wheel, turn the wheel so that the
bulk of it is beneath the stroller and push down on
the wheel lock (14) until it locks into position.
15. Repeat this procedure for the other side.
IMPORTANT WARNING: ALWAYS TEST THAT THE LOCKS
ARE FULLY ENGAGED BEFORE USE.
INSTALLING THE SEAT
FIGURE F
16. Line up the seat housing with the corresponding
connectors located on either side of the stroller frame.
17. Lower the seat onto the connectors and gently push the
seat down until it clicks securely into place.
NOTE: YOUR SEAT CAN BE INSTALLED EITHER
FORWARD OR REARWARD FACING.
18. To remove the seat, simultaneously depress both
buttons in the seat housing on either side of the seat
unit and lift the seat unit from the frame.
IMPORTANT WARNING: NEVER REMOVE/RELEASE THE
SEAT WITH A CHILD IN IT.
INSTALLING THE BUMPER BAR
FIGURE G - BUMPER BAR
19. Insert the front bar ends into the nylon housings
located on either side of the frame. Be sure that the
bar is securely engaged.
20. Wrap the crotch strap around the installed bumper
bar and snap into position
21. The front bar is not adjustable.
22. To remove the front bar: Feeling the side of the
nylon housing that sits below the frame at each side
(facing inward), locate the release button.
23. Press each release button inward while simultaneously
pulling upward on the bar housing. Repeat for the other
side. Note that this may be difcult to do as the bar is
secured rmly as a safety precaution.
IMPORTANT WARNING: THE FRONT BAR IS NEITHER A
RESTRAINING NOR CARRYING DEVICE.
USING THE ADJUSTABLE HANDLE
FIGURE H - ADJUSTABLE HANDLE
24. Your handle can be adjusted to multiple positions.
25. Press the centre locking button while
simultaneously moving the handle up or down.
26. Releasing the locking button will allow the handle
to lock into the next position.
14
click
E
F
click
21
19
G
push
25
H


Product specificaties

Merk: Valco Baby
Categorie: Kinderwagen
Model: Rebel Q Air

Heb je hulp nodig?

Als je hulp nodig hebt met Valco Baby Rebel Q Air stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kinderwagen Valco Baby

Handleiding Kinderwagen

Nieuwste handleidingen voor Kinderwagen