UPM ETW190 Handleiding

UPM Schakelaar ETW190

Lees hieronder de 📖 handleiding in het Nederlandse voor UPM ETW190 (1 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

CLOCK SETTING SCROLLING THROUGH THE MODESDAYLIGHT SAVING TIME (DST)

Press the key to begin the clock setting. The symbol will appear.

Before proceeding with the clock setting and programming for the first time,

press the key.RESET ( )

Select the current day using the or key.

Press the key

Select the current hour using the or key

Press the key

Select the current minute using the or key

Press the key

Set the seconds to zero by pressing either the or key

Press the key to finish the clock setting

This timer allows you to disable any particular program, or if you have more than one

program set, you can disable all of them at once using the function.master disable

To set the clock, first check to see that the display is

in the clock mode ( ). If the display does not

show , press either the or key until the

clock mode ( ) is displayed.

For proper operation, ensure the clock is set to the correct time.

GETTING STARTED

PROGRAM DISABLE

button placements

display

SET – activates set function

RESET ( ) – reset

CD – activates countdown timer

– scrolls through selections

ON/OFF – manual on/off control

RND – activates random functions

To toggle between 12 or 24 hour format, press the key during clock setting

To activate the Daylight Saving Time (DST) function, press and hold both the

and keys together for 3 seconds in the clock mode ( ). When the

DST function is activated, a solid sun symbol ( ) will appear on the LCD screen

and the time will have advanced by one hour.

To de-activate the DST function, press and hold both the and keys again

for 3 seconds in the clock mode ( ). The sun symbol ( ) will disappear

and the time will go back by one hour.

The modes are arranged in a circular pattern. Use the or key to scroll

through the different modes and programs.

Normal

EXAMPLE:

DST Activated

MEMORY BACKUP

This timer is equipped with a built-in rechargeable battery. The internal battery

serves to protect the time and program settings in the case of a power failure.

If you are using the 12 hour format and you are setting an afternoon or evening time,

ensure that the symbol appears on the left.PM

PROGRAM SETTING

This timer is a programmable switch that will automatically turn your lights ON and

OFF based on your specified times. You can program up to 20 programs ( 20 ON

settings and 20 OFF settings).

From the clock mode ( ), press the key

once to go to the setting of PROGRAM 1. ON

Press the key to begin the program setting.

The symbol will appear and the days (MO TU WE TH FR SA SU) will be

blinking. Select the desired day or days of operation by pressing the

or key.

There are 3 primary modes with this timer.

NOTE: The PROGRAM MODE consists of 20 programs.

Each program has of a of settings: an setting and an setting.pair ON OFF

In total, there are 20 ON settings and 20 OFF settings.

! CLOCK MODE

! PROGRAM MODE

! COUNTDOWN MODE

! a specific day (MO, TU, WE, TH, FR, SA or SU);

! Monday through Friday (MO TU WE TH FR);

! Monday through Saturday (MO TU WE TH FR SA);

! Saturday and Sunday (SA SU); or

! everyday from Monday through Sunday (MO TU WE TH FR SA SU)

Programs can be set to operate on:

NOTE: Your choice of days are - a specific day, Monday through Friday,

Monday through Saturday, Saturday and Sunday, or everyday of the week.

How to set a program

Example: Turn ON at 5:15 pm and OFF at 10:45 pm everyday, seven days a week.

IMPORTANT: In order for a program to work, both the ON and the OFF settings

must be set.

Select the hour using the or key Select the hour using the or key

Select the minute using the or key Select the minute using the or key

NOTE: The display will automatically revert back to the clock mode after one

minute, or you can use the or key to scroll to the clock mode or any of

the other modes immediately.

PROGRAM SETTING PROGRAM SETTING

After you finished with the ON setting, press the key

to go to the OFF setting of PROGRAM 1.

Press the key

Press the key Press the key

Press the key to finish the setting of PROGRAM 1.ON Press the key to finish the setting of PROGRAM 1.OFF

EXAMPLE:

For everyday, select (MO TU WE TH FR SA SU)

The days of operation as selected in the ON setting

will re-appear. Confirm, or change if necessary using

the or key.

EXAMPLE:

Select (if clock is set on the 12 hour format); or 5 pm

select (if clock is set on the 24 hour format).17 hours

EXAMPLE:

Select (if clock is set on the 12 hour format); or 10 pm

select (if clock is set on the 24 hour format).22 hours

EXAMPLE:

Select 15 minutes EXAMPLE:

Select 45 minutes

You should now proceed to set the OFF setting of PROGRAM 1.

You have now completed the ON and OFF setting of PROGRAM 1.

To set more programs, repeat the above procedures using the available

program slots (PROGRAMS 2 to 20).

CLOCK (default)

COUNTDOWN

PROGRAM 1 ON

PROGRAM 2 ON

PROGRAM 1 OFF

PROGRAM 2 OFF

SCROLLING THROUGH

THE MODES

PROGRAM 20 OFF

PROGRAM 20 ON

PROGRAM 19 OFF

PROGRAM 19 ON

To disable a single program, select the program of choice by using the

or key.

Set

Weekday indicator

Random

Time display

Clock Countdown Program ON/OFF indicator

Program disable

DST indicator

PM indicator

QUICK-RETURN TO THE CLOCK MODE

At any particular mode, if you wish to return to the clock mode immediately, you

may do so by pressing both the and keys together and release. This

brings the display directly back to the clock mode. Or, if no key is pressed within

one minute, the display will also automatically default itself back to the clock mode.

When a program is disabled, the time settings are stored in memory so that when you

re-enable the programs, the timer will resume with the same programs as before.

SINGLE PROGRAM DISABLE

NOTE: You will need to disable both the ON and OFF setting of the

program to completely disable that particular program.

2Press the key

3Press the key to disable the program. An symbol will appear to X

indicate that the particular setting has been disabled.

4Press the key 3 times to exit.

If this was the ON setting that was disabled, now proceed to disable the OFF setting

of the same program to completely disable that particular program; or if you had

disabled the OFF setting first, now go to the ON setting.

EXAMPLE:

You wish to disable PROGRAM 2 only.

The symbol will appear and the day(s) will be blinking.

PROGRAM DISABLE

Select the OFF setting of the same program by using the or key.

2Press the key

3Press the key to disable the program. An symbol will appear to X

indicate that the particular setting has been disabled.

4Press the key 3 times to exit.

EXAMPLE:

You wish to disable PROGRAM 2 only.

The symbol will appear and the day(s) will be blinking.

You have now successfully disabled PROGRAM 2.

*To re-enable the particular program, repeat the above steps for the ON and

OFF settings. The symbol will indicating that the program has X disappear

been re-enabled (returned to normal).

PROGRAM DISABLE

To perform the master disable, go to the clock mode ( ) by using the

or key.

MASTER PROGRAM DISABLE

2Press the key

3Press the key to disable the program. An symbol will appear to X

indicate that programs have been disabled.all

4Press the key 4 times to exit.

The symbol will appear and the day will be blinking.

If you have more than one program set, and you wish to disable of them at once, all

you can do so by using the function.master disable

*To re-enable the programs, repeat the above steps. The symbol will X

disappear indicating that all the programs have been re-enabled (returned to

normal).

You have now successfully disabled ALL programs.

COUNTDOWN TIMER

The countdown timer works like an hour-glass. You can set a specific duration and

once the countdown is activated, the time will begin to count gradually down to zero.

The countdown can start either in the ON or OFF position.

EXAMPLES OF USE:

!For instance, set the lights to stay ON for 25 minutes (or any other duration as

desired), and automatically turn OFF after that.

!Or, set it so that the lights stays OFF for 40 minutes, for example, and

automatically turn ON after that.

NOTE:

!When the countdown timer is activated, all other programs and random functions

are disabled.

!The duration can be set from one second up to 23 hours 59 minutes 59 seconds.

From the clock mode ( ), press the

key once to go to the countdown mode ( ).

Press the key to begin setting.

The symbol will appear and or indicator will be blinking. Select ON OFF

the desired position by using the or key.

COUNTDOWN TIMER

Press the key.

5Select the hour (duration) using the or key

Press the key.

7Select the minute (duration) using the or key

Press the key.

9Select the second (duration) using the or key

Press the key to complete the countdown setup.

To START the countdown timer, press the key. Once activated, in the

countdown mode ( ), the duration time will begin counting down.

If you move onto any other mode, such as the clock mode ( ) or

program mode ( ), you will notice that the CD symbol will be blinking.

NOTE: The CD symbol will disappear once the countdown timer has stopped.

EXAMPLE:

This shows the countdown duration set for 1 hour

45 minutes 30 seconds, starting from the OFF

position.

The countdown timer will automatically once the time reaches zero.STOP

NOTE: The duration time will automatically be set back to its preset value.

To STOP the countdown timer before the duration time ends, press either the

or key. The duration time will automatically be set back to its preset

value.

RANDOM FUNCTION

How to set the time period for the PROGRAMMABLE random?

From the clock mode ( ), press the key

three times to go to the ON setting of PROGRAM 20.

How to activate or de-activate the PROGRAM random?

In the PROGRAM 20 mode (either in the ON or OFF

setting), press the key to activate the PROGRAM

random. Once activated, the RND symbol will appear

and remain solid (not blinking) on the LCD screen.

The random function can be de-activated by pressing the key again or

the key. The RND symbol will disappear once the random function is de-

activated.

RANDOM FUNCTION

The random function serves as a security feature that allows you to have your

lights turn ON and OFF randomly. The random lighting effectively provides a

lived-in (at-home) look, acting as a deterrent.

There are 3 types of random functions that you can choose with this timer:

!SHORT RANDOM - this mode will cycle your lights ON and OFF for 1 to 2 hour cycles.

!LONG RANDOM - this mode will cycle your lights ON and OFF for 2 to 3 hour cycles.

!PROGRAM RANDOM - this mode allows you to set the specific day(s) and time of day

(i.e. in the evenings only between 6 pm and 11 pm, Monday to Friday) for the random

function to operate. The programmable random will run on 1 to 2 hour cycles.

How to activate or de-activate the SHORT random?

In the clock mode ( ), press the key to

activate the SHORT random. Once activated, the

RND symbol will be blinking.

The random function can be de-activated by pressing the key again or

the key. The RND symbol will disappear once the random function is de-

activated.

How to activate or de-activate the LONG random?

In the countdown mode ( ), press the

key to activate the LONG random. Once

activated, the L-RND symbol will be blinking.

The random function can be de-activated by pressing the key again or

the key. The L-RND symbol will disappear once the random function is

de-activated.

IMPORTANT: The PROGRAM RANDOM will only work

when set on PROGRAM 20.

Set up the ON-time as you would with a regular

program ON setting. Refer to PROGRAM SETTING.

Press the key to proceed with setting up the OFF-time.

Set up the OFF-time as you would with a regular

program OFF setting. Refer to PROGRAM SETTING.

EXAMPLE: This shows the ON-time is set for 6 pm

from Monday to Friday.

EXAMPLE: This shows the OFF-time is set for 11 pm

from Monday to Friday.

TROUBLESHOOTING

problem solution

TECHNICAL SPECIFICATIONS

Programs: 20 programs (with 20 ON settings and 20 OFF settings)

Ratings: 120V AC

Maximum Load: 500W - Single pole installation

Minimum switching time: 1 minute

Technical Support: 1-888-468-6876

NOTE: For a new installation, it may take several days for the internal battery to become fully

charged. Sometimes, with a new timer, the LCD screen may even appear blank or dim upon a

complete installation. This may be the result of a fully discharged internal battery. To correct

this problem, first make sure that the switch is to the position. Main On / Main Off Main On

Then leave the timer installed as it is for several hours (it may take overnight) and afterwards

press the ( ) key. The LCD screen should return to normal operation.RESET

MANUAL ON/OFF

*To manually turn the power ON or OFF, press the key or the timer switch

cover. You can use this at any time to temporarily override the current

programming schedule. The ON or OFF symbol will be blinking. The timer will

resume with its normal programs at the next scheduled program time.

PAGE 1

LCD screen appears blank, dim

or faded upon a complete

installation of the timer switch.

Make sure the slide switch is to the Main On / Main Off Main On

position. If the light turns on, but the LCD screen remains blank or

dim, it may be that the internal battery has become fully discharged.

To correct this problem, leave the timer switch installed as it is for

several hours (it may take overnight) and then press the RESET

( ) key. This should be ample time for the internal battery to

recharge itself and resume normal LCD screen operation.

LCD screen seems “frozen”.

Function keys will not respond.

Press the ( ) key to reset the timer.RESET

Programs do not execute at the

specified times.

Ensure that the random function or countdown timer is not activated.

Check programs – ensure that you have not accidentally

programmed in unwanted settings into the other program slots

available. If you do find unwanted settings, you may disable them

using the single program disable method. Or, if it is easier, press the

RESET ( ) key to reset the timer, then set the clock and the

correct programs again.

Programs do not execute at all. Ensure that the programs are not disabled. Refer to PROGRAM

DISABLE.

NOTE: When the random function is activated, all other programs and countdown timer are disabled.

PROGRAMMABLE

WALL SWITCH TIMER

ETW190

OWNER’S

MANUAL

Congratulations on your

purchase of a UPM timer.

Please take the time to

read and understand this

manual so you can begin

to enjoy the convenience

and energy saving

benefits this product has

to offer.

FEATURES

!20 ON settings /

20 OFF settings

!Programs can be set to

operate on a specific day,

Monday to Friday, Monday

to Saturday, Saturday and

Sunday, or everyday of the

week

!Countdown timer -

“One-Touch Countdown”

!3 random functions

!12/24 hour clock

!Incandescent lighting only

- Maximum load: 500W

!Single pole installation

One-Touch

Countdown

CAUTION!

This timer switch must be used on loads exceeding 500W. NOT

All wiring must comply with applicable codes and regulations.

TO AVOID FIRE, SHOCK, OR DEATH, SHUT OFF POWER

SUPPLY AT THE CIRCUIT BREAKER OR FUSE AND TEST

THAT THE POWER IS OFF BEFORE WIRING.

Handle installation with caution to prevent any risk of electrical shock

that could cause serious injury or death. If you are not sure about any

part of the given instructions, consult a qualified electrician.

This timer switch is for use with Incandescent/Halogen (120V) lighting

applications ONLY. It must be used to control receptacles, NOT

fluorescent lighting, motor-driven appliances or transformer supplied

appliances.

For single pole use only. Cannot be used as part of a 3-way circuit.

Move the slide switch to the position Main ON / Main OFF Main OFF

when replacing bulbs.

INSTALLATION

2Remove existing switch and identify the wires in the wall box.

Using the supplied wire connectors, securely fasten the wires on the

timer to the wires in the wall box according to diagram.

IMPORTANT: TO AVOID FIRE, SHOCK, OR DEATH, SHUT

OFF POWER SUPPLY AT THE CIRCUIT BREAKER OR FUSE

AND TEST THAT THE POWER IS OFF BEFORE WIRING.

Connect either one of the wires from the timer to the black

hot supply wire(s) in the wall box.

Connect the other wire from the timer to the wire in black hot

the wall box coming from the light fixture.

For proper grounding, connect the (ground) wire on green

the timer to the ground “screw” found inside the wall box.

Mount timer into the wall box carefully.

Restore power supply at the circuit breaker or fuse.

Take the new timer and move the Main On / Main Off slide switch to

the position.Main Off

Move the slide switch to the position.Main On / Main Off Main On

INSTALLATION DIAGRAM

Main On / Main Off

One-Touch Countdown Button

The wire connectors provided are for . For aluminum wire, copper wire only

consult an electrician.

Use the supplied ( ) wire connectors with the following wiring small

sizes. Note proper insulation strip lengths.

SMALL:

* Use to join one 14 AWG supply wire with one black timer switch wire.

Strip insulation for 14 AWG supply wire.3/8”

Strip insulation for timer switch wire.1/2”

For installations with 10 or 12 AWG supply wires, or where multiple

supply wires exist, a larger size wire connector should be used;

noting the wire strip lengths below.

(Available at your local hardware store)

LARGE:

Strip insulation for 10 or 12 AWG supply wires.1/2”

Strip insulation for timer switch wire.5/8”

Twist the wire

connector tight.

Be sure no bare

wire is exposed.

IMPORTANT WIRING INFORMATION

SET

RND

SET

ON/

OFF

SET

ON/

OFF

SET

ON/

OFF

SET

CD ON/

OFF

RND

ON/

OFF

RND

ON/

OFF

RND

ON/

OFF

ON/

OFF

ETW190

Black

LOAD

POWER

SOURCE

Screw

Black

Green

PAGE 2 PAGE 3 PAGE 4 PAGE 5 PAGE 6 PAGE 7 PAGE 8 PAGE 9 PAGE 10

PAGE 11 PAGE 12 PAGE 13 PAGE 14 PAGE 15 PAGE 16 PAGE 17 PAGE 18 PAGE 19 PAGE 20

hp://waterheatermer.org/UPM-mers-and-manuals.html

Product specificaties

Merk:	UPM
Categorie:	Schakelaar
Model:	ETW190

Heb je hulp nodig?

Als je hulp nodig hebt met UPM ETW190 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schakelaar UPM

UPM ET150 Handleiding

3 Juni 2023

UPM ET420C Handleiding

28 Mei 2023

UPM ETW350 Handleiding

10 Mei 2023

UPM MT560 Handleiding

8 Mei 2023

UPM ETW193 Handleiding

7 Mei 2023

UPM RT601 Handleiding

6 Mei 2023

UPM ET160 Handleiding

23 April 2023

UPM DT420 Handleiding

22 April 2023

UPM ETW353 Handleiding

13 April 2023

UPM ETW190 Handleiding

27 Februari 2023

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

Smart-AVI UDX-PRXS Handleiding

20 November 2024

Smart-AVI RK-DVX2U-RX12S Handleiding

20 November 2024

Smart-AVI DVN-16PRO-S Handleiding

20 November 2024

Smart-AVI DVX-2U-RXS Handleiding

20 November 2024

Smart-AVI RDU-2P-RXS Handleiding

20 November 2024

Smart-AVI DVX-UTRX Handleiding

20 November 2024

Smart-AVI DPN-4PS Handleiding

20 November 2024

Smart-AVI VNET+8PS Handleiding

20 November 2024

Smart-AVI KDX-TX200S Handleiding

20 November 2024

Smart-AVI DVX-4P-RXS Handleiding

20 November 2024